Hi, Liu Ying wrote: [...] > @@ -30,6 +32,7 @@ > /* i.MX27, i.MX31, i.MX35 share the same PWM function block: */ > > #define MX3_PWMCR 0x00 /* PWM Control Register */ > +#define MX3_PWMIR 0x08 /* PWM Interrupt Register */ > #define MX3_PWMSAR 0x0C /* PWM Sample Register */ > #define MX3_PWMPR 0x10 /* PWM Period Register */ > #define MX3_PWMCR_PRESCALER(x) (((x - 1) & 0xFFF) << 4) > @@ -38,7 +41,12 @@ > #define MX3_PWMCR_DBGEN (1 << 22) > #define MX3_PWMCR_CLKSRC_IPG_HIGH (2 << 16) > #define MX3_PWMCR_CLKSRC_IPG (1 << 16) > +#define MX3_PWMCR_SWR (1 << 3) > #define MX3_PWMCR_EN (1 << 0) > +#define MX3_PWMSR_ROV (1 << 4) > +#define MX3_PWMIR_RIE (1 << 1) > + You should decide whether to use tabs or spaces for indentation. And probably cleanup the indentation of the existing definitions to use all the same indentation style.
> @@ -128,6 +160,13 @@ static int imx_pwm_config_v2(struct pwm_chip *chip, > else > period_cycles = 0; > > + if (!enable || duty_cycles == 0) > + imx_pwm_software_reset_v2(chip); > + else if (readl(imx->mmio_base + MX3_PWMSAR)) > + /* No rollover irq generated if duty peroid is zero. */ typo: 'period'. > @@ -135,27 +174,55 @@ static int imx_pwm_config_v2(struct pwm_chip *chip, > MX3_PWMCR_DOZEEN | MX3_PWMCR_WAITEN | > MX3_PWMCR_DBGEN | MX3_PWMCR_CLKSRC_IPG_HIGH; > > - if (test_bit(PWMF_ENABLED, &pwm->flags)) > + if (enable) > cr |= MX3_PWMCR_EN; > > writel(cr, imx->mmio_base + MX3_PWMCR); > > + if (enable && duty_cycles) > + /* No rollover irq generated if duty peroid is zero. */ dto. Lothar Waßmann -- ___________________________________________________________ Ka-Ro electronics GmbH | Pascalstraße 22 | D - 52076 Aachen Phone: +49 2408 1402-0 | Fax: +49 2408 1402-10 Geschäftsführer: Matthias Kaussen Handelsregistereintrag: Amtsgericht Aachen, HRB 4996 www.karo-electronics.de | i...@karo-electronics.de ___________________________________________________________ -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/