of_phy_connect_fixed_link() is becoming obsolete, and also required platform code to register the fixed PHYs at the specified addresses for those to be usable. Get rid of it and use the new of_phy_is_fixed_link() plus of_phy_register_fixed_link() helpers to transition over the new scheme.
Signed-off-by: Florian Fainelli <f.faine...@gmail.com> --- drivers/net/ethernet/freescale/ucc_geth.c | 14 +++++++++++--- 1 file changed, 11 insertions(+), 3 deletions(-) diff --git a/drivers/net/ethernet/freescale/ucc_geth.c b/drivers/net/ethernet/freescale/ucc_geth.c index c8299c31b21f..fab39e295441 100644 --- a/drivers/net/ethernet/freescale/ucc_geth.c +++ b/drivers/net/ethernet/freescale/ucc_geth.c @@ -1728,9 +1728,6 @@ static int init_phy(struct net_device *dev) phydev = of_phy_connect(dev, ug_info->phy_node, &adjust_link, 0, priv->phy_interface); - if (!phydev) - phydev = of_phy_connect_fixed_link(dev, &adjust_link, - priv->phy_interface); if (!phydev) { dev_err(&dev->dev, "Could not attach to PHY\n"); return -ENODEV; @@ -3790,6 +3787,17 @@ static int ucc_geth_probe(struct platform_device* ofdev) ug_info->uf_info.irq = irq_of_parse_and_map(np, 0); ug_info->phy_node = of_parse_phandle(np, "phy-handle", 0); + if (!ug_info->phy_node) { + /* In the case of a fixed PHY, the DT node associated + * to the PHY is the Ethernet MAC DT node. + */ + if (of_phy_is_fixed_link(np)) { + err = of_phy_register_fixed_link(np); + if (err) + return err; + } + ug_info->phy_node = np; + } /* Find the TBI PHY node. If it's not there, we don't support SGMII */ ug_info->tbi_node = of_parse_phandle(np, "tbi-handle", 0); -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/