On 22.05.2014 06:28, Tushar Behera wrote: > On 05/20/2014 10:13 PM, Tomasz Figa wrote: >> This patch introduces a driver that handles configuration of CLKOUT pin >> of Exynos SoCs that can be used to output certain clocks from inside of >> the SoC to a dedicated output pin. >> >> Signed-off-by: Tomasz Figa <t.f...@samsung.com> >> --- >> .../devicetree/bindings/arm/samsung/pmu.txt | 30 ++++ >> drivers/clk/samsung/Makefile | 1 + >> drivers/clk/samsung/clk-exynos-clkout.c | 153 >> +++++++++++++++++++++ >> 3 files changed, 184 insertions(+) >> create mode 100644 drivers/clk/samsung/clk-exynos-clkout.c >> >> diff --git a/Documentation/devicetree/bindings/arm/samsung/pmu.txt >> b/Documentation/devicetree/bindings/arm/samsung/pmu.txt >> index b562634..5ed94a9 100644 >> --- a/Documentation/devicetree/bindings/arm/samsung/pmu.txt >> +++ b/Documentation/devicetree/bindings/arm/samsung/pmu.txt >> @@ -11,8 +11,38 @@ Properties: >> >> - reg : offset and length of the register set. >> >> + - #clock-cells : must be <1>, since PMU requires once cell as clock >> specifier. > > s/once/one > >> + The single specifier cell is used as index to list of clocks >> + provided by PMU, which is currently: >> + 0 : SoC clock output (CLKOUT pin) > > Will it make more sense if we add a macro for this clock number that > would be referred in the device tree files?
Right now, with just one clock, it doesn't make sense, but if further clocks show up with newer SoCs, then macros will have to be added. Best regards, Tomasz -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
