On Tue, 2005-03-01 at 12:36 +0100, Mws wrote: > hi benjamin > > now i had some spare time to do some investigation > > booting the 2.6.11-rc5 with radeonfb.default_dynclk=0 or with -1 > brings up a framebuffer console. everything is fine. > starting xorg-x11 with Ati binary only drivers just brings up a black screen > without a mouse cursor and freezes the hole machine. even network ect. > is no more reachable from outside the machine. worst thing out of that > a tail on the log files (on another machine) does immediately stop - also no > output is written to syslog :/ > > next scenario - test 2.6.11-rc5 with radeonfb.default_dynclock=0 and -1 > starting xorg-x11 with Xorg Radeon driver. > a grey screen comes up - mouse cursor is visible and also able to move for > 5 - 8 seconds after screen display - then freezes the whole machine again.
Ok, so it's not dynamic clocks. At this point, i have no idea what's going on. I don't yet have any access to PCI Express hardware. You should report this to X.org list where others can try to help me track this down. Ben. - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/