mtd: st_spi_fsm: Provide documentation for boot device mask property
The system configuration registers which display which device the system
booted on are in the same place on all boards which support the FSM.
However, the bits do shift every so slightly. To combat these we're
adding a new property which supplies the necessary mask used to abstract
the required information.
Cc: devicet...@vger.kernel.org
Signed-off-by: Lee Jones <lee.jo...@linaro.org>
diff --git a/Documentation/devicetree/bindings/mtd/st-fsm.txt
b/Documentation/devicetree/bindings/mtd/st-fsm.txt
index c248939..2ef9710 100644
--- a/Documentation/devicetree/bindings/mtd/st-fsm.txt
+++ b/Documentation/devicetree/bindings/mtd/st-fsm.txt
@@ -11,6 +11,10 @@ Optional properties:
- st,syscfg : Phandle to boot-device system configuration registers
- st,boot-device-reg : Address of the aforementioned boot-device register(s)
- st,boot-device-spi : Expected boot-device value if booted via this device
+ - st,boot-device-msk : Mask to use when extracting boot device from the
+ above system config registers
+ NB: If any of the st,boot-device-* properties are missing, the driver falls
+ back to the default assumption of 'booted from SPI'.
Example:
spifsm: spifsm@fe902000{
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
