Ivan, On Thursday 22 May 2014 09:48 AM, Ivan Khoronzhuk wrote: > These patches introduce keystone reset driver. > > The keystone SoC can be rebooted in several ways. By external reset > pin, by soft and by watchdogs. This driver allows software reset and reset > by one of the watchdogs. Also added opportunity to set soft/hard reset type. > > Based on linux-next/master > > v5..v4 > power: reset: keystone-reset: introduce keystone reset driver > - changed to get rsmux and rspll offsets from DT > clock: keystone-pllctrl: add bindings for keystone pll controller > - new patch > mfd: ti-keystone-devctrl: add bindings for device state control > - new patch > power: reset: add bindings for keystone reset driver > - corrected description of "ti,syscon-pll", "ti,syscon-dev" properties > - corrected examples > ARM: dts: keystone: update reset node to work with reset driver > - added nodes for pll-controller and device-state-controll > - added offsets to "ti,syscon-pll", "ti,syscon-dev" properties > Looks like you haven't collected Arnd's Reviewed-by tag on the patches. Can be added later as well while applying.
> v4..v3 > Power: reset: keystone-reset: introduce keystone reset driver > - changed to use syscon framework > - changed to use regmap to access registers > Power: reset: add bindings for keystone reset driver > - deleted properties "reg", "reg-names" > - added properties "ti,syscon-pll", "ti,syscon-dev" > ARM: dts: keystone: update reset node to work with reset driver > - deleted properties "reg", "reg-names" > - added properties "ti,syscon-pll", "ti,syscon-dev" > > v2..v3 > Power: reset: keystone-reset: introduce keystone reset driver > - no functional changes, only sanity > Power: reset: add bindings for keystone reset driver > - corrected WDT numeration in examples > - extended description of wdt_list property > > v1..v2 > - re based on v3.15-rc1 without changes > > Ivan Khoronzhuk (7): > power: reset: keystone-reset: introduce keystone reset driver > clock: keystone-pllctrl: add bindings for keystone pll controller > mfd: ti-keystone-devctrl: add bindings for device state control > power: reset: add bindings for keystone reset driver > ARM: keystone: remove redundant reset stuff > ARM: dts: keystone: update reset node to work with reset driver > ARM: keystone: enable reset driver support > > .../bindings/clock/ti-keystone-pllctrl.txt | 20 +++ > .../bindings/mfd/ti-keystone-devctrl.txt | 19 +++ > .../bindings/power/reset/keystone-reset.txt | 67 +++++++++ > arch/arm/boot/dts/keystone.dtsi | 14 +- > arch/arm/configs/keystone_defconfig | 3 + > arch/arm/mach-keystone/keystone.c | 34 ----- > drivers/power/reset/Kconfig | 8 + > drivers/power/reset/Makefile | 1 + > drivers/power/reset/keystone-reset.c | 166 > +++++++++++++++++++++ > 9 files changed, 297 insertions(+), 35 deletions(-) > create mode 100644 > Documentation/devicetree/bindings/clock/ti-keystone-pllctrl.txt > create mode 100644 > Documentation/devicetree/bindings/mfd/ti-keystone-devctrl.txt > create mode 100644 > Documentation/devicetree/bindings/power/reset/keystone-reset.txt > create mode 100644 drivers/power/reset/keystone-reset.c > -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
