This driver contains checks for four Kconfig macros. But the related
Kconfig symbols have never been part of the tree. Remove these checks
and the code they hide.
Signed-off-by: Paul Bolle <pebo...@tiscali.nl>
---
Untested.
This has been an issue ever since this driver was added in v2.6.15. Note
that there is no header named "*/cpld.h", so setting PRxK can't possibly
work.
drivers/pcmcia/m8xx_pcmcia.c | 75 --------------------------------------------
1 file changed, 75 deletions(-)
diff --git a/drivers/pcmcia/m8xx_pcmcia.c b/drivers/pcmcia/m8xx_pcmcia.c
index 182034d2ef58..53b71fe50767 100644
--- a/drivers/pcmcia/m8xx_pcmcia.c
+++ b/drivers/pcmcia/m8xx_pcmcia.c
@@ -78,24 +78,14 @@ MODULE_LICENSE("Dual MPL/GPL");
/* The FADS series are a mess */
#ifdef CONFIG_FADS
-#if defined(CONFIG_MPC860T) || defined(CONFIG_MPC860) || defined(CONFIG_MPC821)
-#define CONFIG_PCMCIA_SLOT_A
-#else
#define CONFIG_PCMCIA_SLOT_B
#endif
-#endif
#if defined(CONFIG_MPC885ADS)
#define CONFIG_PCMCIA_SLOT_A
#define PCMCIA_GLITCHY_CD
#endif
-/* Cyclades ACS uses both slots */
-#ifdef CONFIG_PRxK
-#define CONFIG_PCMCIA_SLOT_A
-#define CONFIG_PCMCIA_SLOT_B
-#endif
-
#endif /* !defined(CONFIG_PCMCIA_SLOT_A) &&
!defined(CONFIG_PCMCIA_SLOT_B) */
#if defined(CONFIG_PCMCIA_SLOT_A) && defined(CONFIG_PCMCIA_SLOT_B)
@@ -340,71 +330,6 @@ static inline int voltage_set(int slot, int vcc, int vpp)
#endif
-#if defined(CONFIG_PRxK)
-#include <asm/cpld.h>
-extern volatile fpga_pc_regs *fpga_pc;
-
-#define PCMCIA_BOARD_MSG "MPC855T"
-
-static int voltage_set(int slot, int vcc, int vpp)
-{
- u8 reg = 0;
- u8 regread;
- cpld_regs *ccpld = get_cpld();
-
- switch (vcc) {
- case 0:
- break;
- case 33:
- reg |= PCMCIA_VCC_33;
- break;
- case 50:
- reg |= PCMCIA_VCC_50;
- break;
- default:
- return 1;
- }
-
- switch (vpp) {
- case 0:
- break;
- case 33:
- case 50:
- if (vcc == vpp)
- reg |= PCMCIA_VPP_VCC;
- else
- return 1;
- break;
- case 120:
- if ((vcc == 33) || (vcc == 50))
- reg |= PCMCIA_VPP_12;
- else
- return 1;
- default:
- return 1;
- }
-
- reg = reg >> (slot << 2);
- regread = in_8(&ccpld->fpga_pc_ctl);
- if (reg !=
- (regread & ((PCMCIA_VCC_MASK | PCMCIA_VPP_MASK) >> (slot << 2)))) {
- /* enable new powersettings */
- regread =
- regread & ~((PCMCIA_VCC_MASK | PCMCIA_VPP_MASK) >>
- (slot << 2));
- out_8(&ccpld->fpga_pc_ctl, reg | regread);
- msleep(100);
- }
-
- return 0;
-}
-
-#define socket_get(_slot_) PCMCIA_SOCKET_KEY_LV
-#define hardware_enable(_slot_) /* No hardware to enable */
-#define hardware_disable(_slot_) /* No hardware to disable */
-
-#endif /* CONFIG_PRxK */
-
static u32 pending_events[PCMCIA_SOCKETS_NO];
static DEFINE_SPINLOCK(pending_event_lock);
--
1.9.0
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
