Currently musb_platform_reset() is only used by dsps.
In case of BABBLE interrupt for other platforms the  musb_platform_reset()
is a NOP. In such situations no need to re-initialize the endpoints.
Also in the latest silicon revision of AM335x, we do have a babble recovery
mechanism without resetting the IP block. In preperation to add that support
its better to have a rest_done return for  musb_platform_reset().

Signed-off-by: George Cherian <george.cher...@ti.com>
---
 drivers/usb/musb/musb_core.c | 10 ++++++----
 drivers/usb/musb/musb_core.h | 10 ++++++----
 drivers/usb/musb/musb_dsps.c |  3 ++-
 3 files changed, 14 insertions(+), 9 deletions(-)

diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
index c0ce09f..b841ee0 100644
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -1753,9 +1753,11 @@ static void musb_irq_work(struct work_struct *data)
 static void musb_recover_work(struct work_struct *data)
 {
        struct musb *musb = container_of(data, struct musb, recover_work.work);
-       int status;
+       int status, ret;
 
-       musb_platform_reset(musb);
+       ret  = musb_platform_reset(musb);
+       if (ret)
+               return;
 
        usb_phy_vbus_off(musb->xceiv);
        usleep_range(100, 200);
@@ -1764,8 +1766,8 @@ static void musb_recover_work(struct work_struct *data)
        usleep_range(100, 200);
 
        /*
-        * When a babble condition occurs, the musb controller removes the
-        * session bit and the endpoint config is lost.
+        * When a babble condition occurs, the musb controller
+        * removes the session bit and the endpoint config is lost.
         */
        if (musb->dyn_fifo)
                status = ep_config_from_table(musb);
diff --git a/drivers/usb/musb/musb_core.h b/drivers/usb/musb/musb_core.h
index 9241025..414e57a 100644
--- a/drivers/usb/musb/musb_core.h
+++ b/drivers/usb/musb/musb_core.h
@@ -192,7 +192,7 @@ struct musb_platform_ops {
 
        int     (*set_mode)(struct musb *musb, u8 mode);
        void    (*try_idle)(struct musb *musb, unsigned long timeout);
-       void    (*reset)(struct musb *musb);
+       int     (*reset)(struct musb *musb);
 
        int     (*vbus_status)(struct musb *musb);
        void    (*set_vbus)(struct musb *musb, int on);
@@ -555,10 +555,12 @@ static inline void musb_platform_try_idle(struct musb 
*musb,
                musb->ops->try_idle(musb, timeout);
 }
 
-static inline void musb_platform_reset(struct musb *musb)
+static inline int  musb_platform_reset(struct musb *musb)
 {
-       if (musb->ops->reset)
-               musb->ops->reset(musb);
+       if (!musb->ops->reset)
+               return -EINVAL;
+
+       return musb->ops->reset(musb);
 }
 
 static inline int musb_platform_get_vbus_status(struct musb *musb)
diff --git a/drivers/usb/musb/musb_dsps.c b/drivers/usb/musb/musb_dsps.c
index 74c4193..f6f3087 100644
--- a/drivers/usb/musb/musb_dsps.c
+++ b/drivers/usb/musb/musb_dsps.c
@@ -536,7 +536,7 @@ static int dsps_musb_set_mode(struct musb *musb, u8 mode)
        return 0;
 }
 
-static void dsps_musb_reset(struct musb *musb)
+static int dsps_musb_reset(struct musb *musb)
 {
        struct device *dev = musb->controller;
        struct dsps_glue *glue = dev_get_drvdata(dev->parent);
@@ -548,6 +548,7 @@ static void dsps_musb_reset(struct musb *musb)
        usleep_range(100, 200);
        usb_phy_init(musb->xceiv);
 
+       return 0;
 }
 
 static struct musb_platform_ops dsps_ops = {
-- 
1.8.3.1

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Reply via email to