Am Dienstag, den 27.05.2014, 14:05 +0800 schrieb Axel Lin:
> When fixed_uV is set and n_voltage is 1, regulator core will return
> rdev->desc->fixed_uV in regulator_get_voltage() and regulator_list_voltage().
> 
> Rename ltc3589_standby_regulator_ops to ltc3589_fixed_standby_regulator_ops,
> this makes the code clear that the ops is for fixed voltage regulator.
> 
> Signed-off-by: Axel Lin <axel....@ingics.com>

Looks good to me.

Acked-by: Philipp Zabel <p.za...@pengutronix.de>

> ---
>  drivers/regulator/ltc3589.c | 15 ++-------------
>  1 file changed, 2 insertions(+), 13 deletions(-)
> 
> diff --git a/drivers/regulator/ltc3589.c b/drivers/regulator/ltc3589.c
> index fef64ee..110a99e 100644
> --- a/drivers/regulator/ltc3589.c
> +++ b/drivers/regulator/ltc3589.c
> @@ -160,15 +160,6 @@ static int ltc3589_set_suspend_mode(struct regulator_dev 
> *rdev,
>       return regmap_update_bits(ltc3589->regmap, LTC3589_VCCR, mask, bit);
>  }
>  
> -static int ltc3589_list_voltage_fixed(struct regulator_dev *rdev,
> -                                   unsigned int selector)
> -{
> -     if (selector)
> -             return -EINVAL;
> -
> -     return rdev->desc->fixed_uV;
> -}
> -
>  /* SW1, SW2, SW3, LDO2 */
>  static struct regulator_ops ltc3589_linear_regulator_ops = {
>       .enable = regulator_enable_regmap,
> @@ -188,12 +179,10 @@ static struct regulator_ops ltc3589_fixed_regulator_ops 
> = {
>       .enable = regulator_enable_regmap,
>       .disable = regulator_disable_regmap,
>       .is_enabled = regulator_is_enabled_regmap,
> -     .list_voltage = ltc3589_list_voltage_fixed,
>  };
>  
>  /* LDO1 */
> -static struct regulator_ops ltc3589_standby_regulator_ops = {
> -     .list_voltage = ltc3589_list_voltage_fixed,
> +static struct regulator_ops ltc3589_fixed_standby_regulator_ops = {
>  };
>  
>  /* LDO4 */
> @@ -242,7 +231,7 @@ static struct ltc3589_regulator 
> ltc3589_regulators[LTC3589_NUM_REGULATORS] = {
>       LTC3589_LINEAR_REG(SW2, B2DTV1),
>       LTC3589_LINEAR_REG(SW3, B3DTV1),
>       LTC3589_FIXED_REG(BB_OUT),
> -     LTC3589_REG(LDO1, standby, 0, 0, 0, 0),
> +     LTC3589_REG(LDO1, fixed_standby, 0, 0, 0, 0),
>       LTC3589_LINEAR_REG(LDO2, L2DTV1),
>       LTC3589_FIXED_REG(LDO3),
>       LTC3589_REG(LDO4, table, LTC3589_OVEN_LDO4, LTC3589_L2DTV2, 0x60, 0),

thanks
Philipp

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Reply via email to