Hi,
On Mon, May 5, 2014 at 11:09 AM, Anshuman Khandual <khand...@linux.vnet.ibm.com> wrote: > > This patchset is the re-spin of the original branch stack > sampling > patchset which introduced new PERF_SAMPLE_BRANCH_COND branch filter. This > patchset > also enables SW based branch filtering support for book3s powerpc platforms > which > have PMU HW backed branch stack sampling support. > > Summary of code changes in this patchset: > > (1) Introduces a new PERF_SAMPLE_BRANCH_COND branch filter > (2) Add the "cond" branch filter options in the "perf record" tool > (3) Enable PERF_SAMPLE_BRANCH_COND in X86 platforms > (4) Enable PERF_SAMPLE_BRANCH_COND in POWER8 platform > (5) Update the documentation regarding "perf record" tool > (6) Add some new powerpc instruction analysis functions in code-patching > library > (7) Enable SW based branch filter support for powerpc book3s > (8) Changed BHRB configuration in POWER8 to accommodate SW branch filters > I have been looking at those patches and ran some tests. And I found a few issues so far. I am running: $ perf record -j any_ret -e cycles:u test_program $ perf report -D Most entries are okay and match the filter, however some do not make sense: 3642586996762 0x15d0 [0x108]: PERF_RECORD_SAMPLE(IP, 2): 17921/17921: 0x10001170 period: 613678 addr: 0 .... branch stack: nr:9 ..... 0: 00000000100011cc -> 0000000010000e38 ..... 1: 0000000010001150 -> 00000000100011bc ..... 2: 0000000010001208 -> 0000000010000e38 ..... 3: 0000000010001160 -> 00000000100011f8 ..... 4: 00000000100011cc -> 0000000010000e38 ..... 5: 0000000010001150 -> 00000000100011bc ..... 6: 0000000010001208 -> 0000000010000e38 ..... 7: 0000000010001160 -> 00000000100011f8 ..... 8: 0000000000000000 -> 0000000010001160 ^^^^^^ Entry 8 does not make sense, unless 0x0 is a valid return branch instruction address. If an address is invalid, the whole entry needs to be eliminated. It is okay to have less than the max number of entries supported by HW. I also had cases where monitoring only at the user level, got me branch addresses in the 0xc0000000...... range. My test program is linked statically. when eliminating the bogus entries, my tests yielded only return branch instruction addresses which is good. Will run more tests. > With this new SW enablement, the branch filter support for book3s platforms > have > been extended to include all these combinations discussed below with a sample > test > application program (included here). > > Changes in V2 > ============= > (1) Enabled PPC64 SW branch filtering support > (2) Incorporated changes required for all previous comments > > Changes in V3 > ============= > (1) Split the SW branch filter enablement into multiple patches > (2) Added PMU neutral SW branch filtering code, PMU specific HW branch > filtering code > (3) Added new instruction analysis functionality into powerpc code-patching > library > (4) Changed name for some of the functions > (5) Fixed couple of spelling mistakes > (6) Changed code documentation in multiple places > > Changes in V4 > ============= > (1) Changed the commit message for patch (01/10) > (2) Changed the patch (02/10) to accommodate review comments from Michael > Ellerman > (3) Rebased the patchset against latest Linus's tree > > Changes in V5 > ============= > (1) Added a precursor patch to cleanup the indentation problem in > power_pmu_bhrb_read > (2) Added a precursor patch to re-arrange P8 PMU BHRB filter config which > improved the clarity > (3) Merged the previous 10th patch into the 8th patch > (4) Moved SW based branch analysis code from core perf into code-patching > library as suggested by Michael > (5) Simplified the logic in branch analysis library > (6) Fixed some ambiguities in documentation at various places > (7) Added some more in-code documentation blocks at various places > (8) Renamed some local variable and function names > (9) Fixed some indentation and white space errors in the code > (10) Implemented almost all the review comments and suggestions made by > Michael Ellerman on V4 patchset > (11) Enabled privilege mode SW branch filter > (12) Simplified and generalized the SW implemented conditional branch filter > (13) PERF_SAMPLE_BRANCH_COND filter is now supported only through SW > implementation > (14) Adjusted other patches to deal with the above changes > > Changes in V6 > ============= > (1) Rebased the patchset against the master > (2) Added "Reviewed-by: Andi Kleen" in the first four patches in the series > which changes the > generic or X86 perf code. [https://lkml.org/lkml/2014/4/7/130] > > HW implemented branch filters > ============================= > > (1) perf record -j any_call -e branch-misses:u ./cprog > > # Overhead Command Source Shared Object Source Symbol Target > Shared Object Target Symbol > # ........ ....... .................... ....................... > .................... .................... > # > 7.85% cprog cprog [.] sw_3_1 cprog > [.] success_3_1_2 > 5.66% cprog cprog [.] sw_3_1 cprog > [.] sw_3_1_2 > 5.65% cprog cprog [.] hw_1_1 cprog > [.] symbol1 > 5.42% cprog cprog [.] sw_3_1 cprog > [.] sw_3_1_3 > 5.40% cprog cprog [.] callme cprog > [.] hw_1_1 > 5.40% cprog cprog [.] sw_3_1 cprog > [.] success_3_1_1 > 5.40% cprog cprog [.] sw_3_1 cprog > [.] sw_3_1_1 > 5.39% cprog cprog [.] sw_4_2 cprog > [.] lr_addr > 5.39% cprog cprog [.] callme cprog > [.] sw_4_2 > 5.39% cprog [unknown] [.] 00000000 cprog > [.] ctr_addr > 5.38% cprog cprog [.] hw_1_2 cprog > [.] symbol2 > 5.38% cprog cprog [.] callme cprog > [.] hw_1_2 > 5.16% cprog cprog [.] sw_3_1 cprog > [.] success_3_1_3 > 5.15% cprog cprog [.] callme cprog > [.] sw_3_2 > 5.14% cprog cprog [.] callme cprog > [.] hw_2_2 > 2.96% cprog cprog [.] callme cprog > [.] sw_3_1 > 2.94% cprog cprog [.] callme cprog > [.] hw_2_1 > 2.71% cprog cprog [.] main cprog > [.] callme > 2.71% cprog [unknown] [.] 00000000 cprog > [.] lr_addr > 2.70% cprog cprog [.] sw_4_1 cprog > [.] ctr_addr > 2.70% cprog cprog [.] callme cprog > [.] sw_4_1 > 0.09% cprog [unknown] [.] 0xf7ad76c4 [unknown] > [.] 0xf7ac22c0 > 0.00% cprog libc-2.11.2.so [.] vfprintf > libc-2.11.2.so [.] __errno_location > 0.00% cprog libc-2.11.2.so [.] printf > libc-2.11.2.so [.] vfprintf > 0.00% cprog libc-2.11.2.so [.] _IO_file_doallocate > libc-2.11.2.so [.] isatty > 0.00% cprog libc-2.11.2.so [.] _IO_file_doallocate > libc-2.11.2.so [.] mmap > 0.00% cprog libc-2.11.2.so [.] isatty > libc-2.11.2.so [.] tcgetattr > 0.00% cprog cprog [.] main [unknown] > [.] 0x10000950 > 0.00% cprog [unknown] [.] 00000000 > libc-2.11.2.so [.] _IO_file_stat > 0.00% cprog [unknown] [.] 0xf7acfca4 cprog > [.] _fini > 0.00% cprog [unknown] [k] 00000000 cprog > [k] ctr_addr > 0.00% cprog [unknown] [k] 00000000 cprog > [k] lr_addr > > SW implemented branch filters > ============================= > > (2) perf record -j cond -e branch-misses:u ./cprog > > # Overhead Command Source Shared Object Source Symbol Target > Shared Object Target Symbol > # ........ ....... .................... ...................... > .................... ...................... > # > 25.82% cprog [unknown] [.] 00000000 cprog > [.] sw_3_1 > 12.66% cprog cprog [.] sw_4_2 cprog > [.] lr_addr > 12.63% cprog [unknown] [.] 00000000 cprog > [.] callme > 9.42% cprog cprog [.] hw_2_2 cprog > [.] address2 > 9.39% cprog cprog [.] sw_3_1 cprog > [.] success_3_1_2 > 4.91% cprog cprog [.] sw_3_1 cprog > [.] success_3_1_1 > 4.91% cprog cprog [.] sw_3_1 cprog > [.] success_3_1_3 > 3.35% cprog cprog [.] sw_3_1_3 cprog > [.] sw_3_1 > 3.34% cprog cprog [.] sw_3_1_1 cprog > [.] sw_3_1 > 3.31% cprog cprog [.] hw_1_2 cprog > [.] symbol2 > 3.31% cprog cprog [.] sw_4_1 cprog > [.] ctr_addr > 3.29% cprog cprog [.] hw_2_1 cprog > [.] address1 > 3.27% cprog cprog [.] sw_3_1_2 cprog > [.] sw_3_1 > 0.32% cprog [unknown] [.] 0xf7c62328 [unknown] > [.] 0xf7c62320 > 0.01% cprog libc-2.11.2.so [.] vfprintf > libc-2.11.2.so [.] vfprintf > 0.01% cprog libc-2.11.2.so [.] _IO_file_xsputn > libc-2.11.2.so [.] _IO_file_xsputn > 0.01% cprog libc-2.11.2.so [.] _IO_default_xsputn > libc-2.11.2.so [.] _IO_default_xsputn > 0.01% cprog libc-2.11.2.so [.] strchrnul > libc-2.11.2.so [.] strchrnul > 0.01% cprog [unknown] [.] 00000000 > libc-2.11.2.so [.] _IO_file_xsputn > 0.01% cprog [unknown] [k] 00000000 cprog > [k] callme > > > (3) perf record -j any_ret -e branch-misses:u ./cprog > > # Overhead Command Source Shared Object Source Symbol Target > Shared Object Target Symbol > # ........ ....... .................... ..................... > .................... ..................... > # > 15.61% cprog [unknown] [.] 00000000 cprog > [.] sw_3_1 > 6.28% cprog cprog [.] symbol2 cprog > [.] hw_1_2 > 6.28% cprog cprog [.] ctr_addr cprog > [.] sw_4_1 > 6.26% cprog cprog [.] success_3_1_3 cprog > [.] sw_3_1 > 6.24% cprog cprog [.] symbol1 cprog > [.] hw_1_1 > 6.24% cprog cprog [.] sw_4_2 cprog > [.] callme > 6.21% cprog [unknown] [.] 00000000 cprog > [.] callme > 6.19% cprog cprog [.] lr_addr cprog > [.] sw_4_2 > 3.16% cprog cprog [.] hw_1_2 cprog > [.] callme > 3.15% cprog cprog [.] success_3_1_1 cprog > [.] sw_3_1 > 3.15% cprog cprog [.] sw_4_1 cprog > [.] callme > 3.14% cprog cprog [.] callme cprog > [.] main > 3.13% cprog cprog [.] hw_1_1 cprog > [.] callme > 3.13% cprog cprog [.] sw_3_1_1 cprog > [.] sw_3_1 > 3.12% cprog cprog [.] back2 cprog > [.] callme > 3.12% cprog cprog [.] sw_3_1 cprog > [.] callme > 3.11% cprog cprog [.] back1 cprog > [.] callme > 3.11% cprog cprog [.] sw_3_1_2 cprog > [.] sw_3_1 > 3.11% cprog cprog [.] sw_3_1_3 cprog > [.] sw_3_1 > 3.10% cprog cprog [.] sw_3_2 cprog > [.] callme > 3.09% cprog cprog [.] success_3_1_2 cprog > [.] sw_3_1 > 0.03% cprog [unknown] [.] 0x100009b0 [unknown] > [.] 0xf7d5581c > 0.01% cprog libc-2.11.2.so [.] _IO_file_overflow > libc-2.11.2.so [.] _IO_file_xsputn > 0.01% cprog libc-2.11.2.so [.] _IO_file_setbuf [unknown] > [.] 0x0fee1084 > 0.01% cprog [unknown] [.] 0xf7d5589c > libc-2.11.2.so [.] printf > 0.01% cprog [unknown] [.] 00000000 > libc-2.11.2.so [.] _IO_file_overflow > 0.01% cprog [unknown] [.] 00000000 > libc-2.11.2.so [.] _IO_file_setbuf > 0.01% cprog [unknown] [k] 00000000 cprog > [k] callme > > (4) perf record -j ind_call -e branch-misses:u ./cprog > > # Overhead Command Source Shared Object Source Symbol Target Shared > Object Target Symbol > # ........ ....... .................... .............. > .................... ..................... > # > 42.59% cprog [unknown] [.] 00000000 cprog > [.] sw_3_1 > 25.88% cprog cprog [.] sw_4_2 cprog > [.] lr_addr > 25.65% cprog [unknown] [.] 00000000 cprog > [.] callme > 5.58% cprog cprog [.] sw_4_1 cprog > [.] ctr_addr > 0.23% cprog [unknown] [k] 00000000 cprog > [k] callme > 0.05% cprog [unknown] [.] 00000000 [unknown] > [.] 0xf79fd740 > 0.03% cprog [unknown] [.] 00000000 libc-2.11.2.so > [.] _IO_file_overflow > > > (5) perf record -j any_call,any_ret -e branch-misses:u ./cprog > > # Overhead Command Source Shared Object Source Symbol Target > Shared Object Target Symbol > # ........ ....... .................... ......................... > .................... ..................... > # > 10.00% cprog [unknown] [.] 00000000 cprog > [.] sw_3_1 > 4.20% cprog cprog [.] sw_4_2 cprog > [.] lr_addr > 4.17% cprog cprog [.] lr_addr cprog > [.] sw_4_2 > 4.16% cprog cprog [.] symbol1 cprog > [.] hw_1_1 > 4.12% cprog [unknown] [.] 00000000 cprog > [.] callme > 4.12% cprog cprog [.] symbol2 cprog > [.] hw_1_2 > 4.11% cprog cprog [.] success_3_1_3 cprog > [.] sw_3_1 > 4.11% cprog cprog [.] ctr_addr cprog > [.] sw_4_1 > 4.10% cprog cprog [.] sw_4_2 cprog > [.] callme > 2.42% cprog cprog [.] callme cprog > [.] sw_4_2 > 2.40% cprog cprog [.] sw_3_1_3 cprog > [.] sw_3_1 > 2.40% cprog cprog [.] sw_3_1 cprog > [.] sw_3_1_3 > 2.39% cprog cprog [.] hw_1_2 cprog > [.] symbol2 > 2.39% cprog cprog [.] back1 cprog > [.] callme > 2.39% cprog cprog [.] sw_3_1_1 cprog > [.] sw_3_1 > 2.39% cprog cprog [.] sw_3_1 cprog > [.] sw_3_1_1 > 2.39% cprog cprog [.] sw_3_1 cprog > [.] callme > 2.39% cprog cprog [.] sw_4_1 cprog > [.] ctr_addr > 2.39% cprog cprog [.] callme cprog > [.] hw_1_2 > 2.39% cprog cprog [.] callme cprog > [.] sw_3_1 > 2.39% cprog cprog [.] sw_3_1_2 cprog > [.] sw_3_1 > 2.39% cprog cprog [.] sw_3_1 cprog > [.] sw_3_1_2 > 2.38% cprog cprog [.] hw_1_1 cprog > [.] symbol1 > 2.38% cprog cprog [.] callme cprog > [.] hw_1_1 > 1.78% cprog cprog [.] back2 cprog > [.] callme > 1.78% cprog cprog [.] hw_1_1 cprog > [.] callme > 1.76% cprog cprog [.] success_3_1_2 cprog > [.] sw_3_1 > 1.76% cprog cprog [.] sw_3_1 cprog > [.] success_3_1_2 > 1.76% cprog cprog [.] sw_3_2 cprog > [.] callme > 1.76% cprog cprog [.] callme cprog > [.] sw_3_2 > 1.73% cprog cprog [.] success_3_1_1 cprog > [.] sw_3_1 > 1.73% cprog cprog [.] sw_3_1 cprog > [.] success_3_1_1 > 1.73% cprog cprog [.] hw_1_2 cprog > [.] callme > 1.71% cprog cprog [.] sw_3_1 cprog > [.] success_3_1_3 > 1.71% cprog cprog [.] sw_4_1 cprog > [.] callme > 1.71% cprog cprog [.] callme cprog > [.] main > 0.05% cprog [unknown] [k] 00000000 cprog > [k] callme > 0.03% cprog [unknown] [.] 0xf7aa9d4c > [unknown] [.] 0xf7aa5f80 > 0.01% cprog libc-2.11.2.so [.] __errno_location > libc-2.11.2.so [.] vfprintf > 0.01% cprog libc-2.11.2.so [.] vfprintf > libc-2.11.2.so [.] __errno_location > 0.01% cprog libc-2.11.2.so [.] _IO_doallocbuf > libc-2.11.2.so [.] _IO_file_overflow > 0.01% cprog cprog [.] __do_global_dtors_aux > [unknown] [.] 0xf7a9fc74 > 0.01% cprog [unknown] [.] 0xf7a9fca4 cprog > [.] _fini > > (6) perf record -j any_call,ind_call -e branch-misses:u ./cprog > > # Overhead Command Source Shared Object Source Symbol Target > Shared Object Target Symbol > # ........ ....... .................... ...................... > .................... ...................... > # > 17.38% cprog [unknown] [.] 00000000 cprog > [.] sw_3_1 > 7.76% cprog cprog [.] sw_4_2 cprog > [.] lr_addr > 7.64% cprog [unknown] [.] 00000000 cprog > [.] callme > 6.00% cprog cprog [.] sw_3_1 cprog > [.] sw_3_1_1 > 6.00% cprog cprog [.] callme cprog > [.] sw_3_1 > 5.98% cprog cprog [.] sw_4_1 cprog > [.] ctr_addr > 5.97% cprog cprog [.] hw_1_1 cprog > [.] symbol1 > 5.97% cprog cprog [.] hw_1_2 cprog > [.] symbol2 > 5.97% cprog cprog [.] sw_3_1 cprog > [.] sw_3_1_3 > 5.97% cprog cprog [.] callme cprog > [.] hw_1_1 > 5.97% cprog cprog [.] callme cprog > [.] hw_1_2 > 5.96% cprog cprog [.] callme cprog > [.] sw_4_2 > 5.95% cprog cprog [.] sw_3_1 cprog > [.] sw_3_1_2 > 1.83% cprog cprog [.] sw_3_1 cprog > [.] success_3_1_2 > 1.82% cprog cprog [.] sw_3_1 cprog > [.] success_3_1_1 > 1.82% cprog cprog [.] sw_3_1 cprog > [.] success_3_1_3 > 1.82% cprog cprog [.] callme cprog > [.] sw_3_2 > 0.14% cprog [unknown] [k] 00000000 cprog > [k] callme > 0.01% cprog libc-2.11.2.so [.] vfprintf > libc-2.11.2.so [.] strchrnul > 0.01% cprog libc-2.11.2.so [.] _IO_file_xsputn > libc-2.11.2.so [.] _IO_default_xsputn > 0.01% cprog libc-2.11.2.so [.] _IO_default_xsputn > libc-2.11.2.so [.] _IO_file_overflow > 0.01% cprog ld-2.11.2.so [.] calloc [unknown] > [.] 0xf795b390 > 0.01% cprog [unknown] [.] 0x0fee00fc > libc-2.11.2.so [.] _IO_file_overflow > 0.01% cprog [unknown] [.] 00000000 > ld-2.11.2.so [.] calloc > 0.01% cprog [unknown] [.] 0xf794b41c [unknown] > [.] 0xf794ab70 > > (7) perf record -j cond,any_ret -e branch-misses:u ./cprog > > # Overhead Command Source Shared Object Source Symbol Target > Shared Object Target Symbol > # ........ ....... .................... ...................... > .................... ...................... > # > 12.43% cprog [unknown] [.] 00000000 cprog > [.] sw_3_1 > 4.91% cprog cprog [.] lr_addr cprog > [.] sw_4_2 > 4.89% cprog [unknown] [.] 00000000 cprog > [.] callme > 4.87% cprog cprog [.] sw_4_2 cprog > [.] lr_addr > 4.87% cprog cprog [.] symbol1 cprog > [.] hw_1_1 > 4.19% cprog cprog [.] hw_2_2 cprog > [.] address2 > 4.19% cprog cprog [.] back2 cprog > [.] callme > 4.19% cprog cprog [.] sw_3_2 cprog > [.] callme > 4.18% cprog cprog [.] hw_1_1 cprog > [.] callme > 4.18% cprog cprog [.] success_3_1_2 cprog > [.] sw_3_1 > 4.18% cprog cprog [.] sw_3_1 cprog > [.] success_3_1_2 > 4.16% cprog cprog [.] sw_4_2 cprog > [.] callme > 4.13% cprog cprog [.] ctr_addr cprog > [.] sw_4_1 > 4.12% cprog cprog [.] symbol2 cprog > [.] hw_1_2 > 4.12% cprog cprog [.] success_3_1_3 cprog > [.] sw_3_1 > 3.43% cprog cprog [.] callme cprog > [.] main > 3.42% cprog cprog [.] sw_3_1 cprog > [.] success_3_1_3 > 3.41% cprog cprog [.] success_3_1_1 cprog > [.] sw_3_1 > 3.41% cprog cprog [.] sw_3_1 cprog > [.] success_3_1_1 > 3.41% cprog cprog [.] sw_4_1 cprog > [.] callme > 3.40% cprog cprog [.] hw_1_2 cprog > [.] callme > 0.73% cprog cprog [.] sw_3_1_3 cprog > [.] sw_3_1 > 0.73% cprog cprog [.] sw_4_1 cprog > [.] ctr_addr > 0.72% cprog cprog [.] hw_1_2 cprog > [.] symbol2 > 0.72% cprog cprog [.] sw_3_1_1 cprog > [.] sw_3_1 > 0.70% cprog cprog [.] hw_2_1 cprog > [.] address1 > 0.70% cprog cprog [.] back1 cprog > [.] callme > 0.70% cprog cprog [.] sw_3_1_2 cprog > [.] sw_3_1 > 0.70% cprog cprog [.] sw_3_1 cprog > [.] callme > 0.19% cprog [unknown] [.] 0xf7c12328 [unknown] > [.] 0xf7c12320 > 0.01% cprog libc-2.11.2.so [.] __errno_location > libc-2.11.2.so [.] vfprintf > 0.01% cprog libc-2.11.2.so [.] vfprintf > libc-2.11.2.so [.] vfprintf > 0.01% cprog libc-2.11.2.so [.] _IO_file_overflow [unknown] > [.] 0x0fee0100 > 0.01% cprog libc-2.11.2.so [.] _IO_default_xsputn > libc-2.11.2.so [.] _IO_default_xsputn > 0.01% cprog [unknown] [.] 00000000 > libc-2.11.2.so [.] _IO_file_overflow > > (8) perf record -j cond,ind_call -e branch-misses:u ./cprog > > # Overhead Command Source Shared Object Source Symbol Target Shared > Object Target Symbol > # ........ ....... .................... .............. > .................... ................. > # > 20.70% cprog [unknown] [.] 00000000 cprog > [.] sw_3_1 > 9.99% cprog cprog [.] sw_4_2 cprog > [.] lr_addr > 9.91% cprog [unknown] [.] 00000000 cprog > [.] callme > 9.45% cprog cprog [.] sw_3_1_3 cprog > [.] sw_3_1 > 9.44% cprog cprog [.] hw_2_1 cprog > [.] address1 > 9.43% cprog cprog [.] sw_3_1_1 cprog > [.] sw_3_1 > 9.42% cprog cprog [.] hw_1_2 cprog > [.] symbol2 > 9.42% cprog cprog [.] sw_3_1_2 cprog > [.] sw_3_1 > 9.42% cprog cprog [.] sw_4_1 cprog > [.] ctr_addr > 0.65% cprog cprog [.] sw_3_1 cprog > [.] success_3_1_1 > 0.62% cprog cprog [.] sw_3_1 cprog > [.] success_3_1_3 > 0.56% cprog cprog [.] hw_2_2 cprog > [.] address2 > 0.55% cprog cprog [.] sw_3_1 cprog > [.] success_3_1_2 > 0.29% cprog [unknown] [.] 0xf7f72328 [unknown] > [.] 0xf7f72320 > 0.10% cprog [unknown] [k] 00000000 cprog > [k] callme > 0.02% cprog libc-2.11.2.so [.] _IO_setb libc-2.11.2.so > [.] _IO_setb > > (9) perf record -e branch-misses:u -j any_call,any_ret,ind_call,cond ./cprog > > # Overhead Command Source Shared Object Source Symbol Target Shared > Object Target Symbol > # ........ ....... .................... .................. > .................... ....................... > # > 9.31% cprog [unknown] [.] 00000000 cprog > [.] sw_3_1 > 4.04% cprog cprog [.] symbol1 cprog > [.] hw_1_1 > 4.03% cprog cprog [.] lr_addr cprog > [.] sw_4_2 > 4.03% cprog cprog [.] sw_4_2 cprog > [.] lr_addr > 4.00% cprog [unknown] [.] 00000000 cprog > [.] callme > 3.88% cprog cprog [.] ctr_addr cprog > [.] sw_4_1 > 3.87% cprog cprog [.] sw_4_2 cprog > [.] callme > 3.86% cprog cprog [.] symbol2 cprog > [.] hw_1_2 > 3.86% cprog cprog [.] success_3_1_3 cprog > [.] sw_3_1 > 2.49% cprog cprog [.] sw_4_1 cprog > [.] ctr_addr > 2.47% cprog cprog [.] hw_1_1 cprog > [.] symbol1 > 2.47% cprog cprog [.] sw_3_1_1 cprog > [.] sw_3_1 > 2.47% cprog cprog [.] sw_3_1 cprog > [.] sw_3_1_1 > 2.47% cprog cprog [.] callme cprog > [.] hw_1_1 > 2.47% cprog cprog [.] callme cprog > [.] sw_3_1 > 2.47% cprog cprog [.] hw_1_2 cprog > [.] symbol2 > 2.47% cprog cprog [.] hw_2_1 cprog > [.] address1 > 2.47% cprog cprog [.] back1 cprog > [.] callme > 2.47% cprog cprog [.] sw_3_1_3 cprog > [.] sw_3_1 > 2.47% cprog cprog [.] sw_3_1 cprog > [.] sw_3_1_3 > 2.47% cprog cprog [.] sw_3_1 cprog > [.] callme > 2.47% cprog cprog [.] callme cprog > [.] hw_1_2 > 2.47% cprog cprog [.] callme cprog > [.] sw_4_2 > 2.46% cprog cprog [.] sw_3_1_2 cprog > [.] sw_3_1 > 2.46% cprog cprog [.] sw_3_1 cprog > [.] sw_3_1_2 > 1.57% cprog cprog [.] success_3_1_2 cprog > [.] sw_3_1 > 1.57% cprog cprog [.] sw_3_1 cprog > [.] success_3_1_2 > 1.57% cprog cprog [.] hw_1_1 cprog > [.] callme > 1.56% cprog cprog [.] hw_2_2 cprog > [.] address2 > 1.56% cprog cprog [.] back2 cprog > [.] callme > 1.56% cprog cprog [.] sw_3_2 cprog > [.] callme > 1.56% cprog cprog [.] callme cprog > [.] sw_3_2 > 1.41% cprog cprog [.] success_3_1_1 cprog > [.] sw_3_1 > 1.41% cprog cprog [.] sw_3_1 cprog > [.] success_3_1_1 > 1.40% cprog cprog [.] sw_4_1 cprog > [.] callme > 1.39% cprog cprog [.] hw_1_2 cprog > [.] callme > 1.39% cprog cprog [.] sw_3_1 cprog > [.] success_3_1_3 > 1.39% cprog cprog [.] callme cprog > [.] main > 0.14% cprog [unknown] [.] 0xf7d72328 [unknown] > [.] 0xf7d72320 > 0.03% cprog [unknown] [k] 00000000 cprog > [k] callme > 0.01% cprog libc-2.11.2.so [.] _IO_doallocbuf libc-2.11.2.so > [.] _IO_doallocbuf > 0.01% cprog libc-2.11.2.so [.] printf cprog > [.] main > 0.01% cprog libc-2.11.2.so [.] _IO_doallocbuf libc-2.11.2.so > [.] _IO_file_doallocate > 0.01% cprog ld-2.11.2.so [.] malloc [unknown] > [.] 0xf7d8b380 > 0.01% cprog cprog [.] main [unknown] > [.] 0x0fe7f63c > 0.01% cprog [unknown] [.] 0xf7d8b388 ld-2.11.2.so > [.] __libc_memalign > 0.01% cprog [unknown] [.] 00000000 ld-2.11.2.so > [.] malloc > > Please refer to the V4 version of the patchset to learn about the sample test > case and it's makefile. > > Anshuman Khandual (11): > perf: Add PERF_SAMPLE_BRANCH_COND > perf, tool: Conditional branch filter 'cond' added to perf record > x86, perf: Add conditional branch filtering support > perf, documentation: Description for conditional branch filter > powerpc, perf: Re-arrange BHRB processing > powerpc, perf: Re-arrange PMU based branch filter processing in POWER8 > powerpc, perf: Change the name of HW PMU branch filter tracking variable > powerpc, lib: Add new branch analysis support functions > powerpc, perf: Enable SW filtering in branch stack sampling framework > power8, perf: Adapt BHRB PMU configuration to work with SW filters > powerpc, perf: Enable privilege mode SW branch filters > > arch/powerpc/include/asm/code-patching.h | 16 ++ > arch/powerpc/include/asm/perf_event_server.h | 6 +- > arch/powerpc/lib/code-patching.c | 80 +++++++ > arch/powerpc/perf/core-book3s.c | 323 > ++++++++++++++++++++++----- > arch/powerpc/perf/power8-pmu.c | 70 ++++-- > arch/x86/kernel/cpu/perf_event_intel_lbr.c | 5 + > include/uapi/linux/perf_event.h | 3 +- > tools/perf/Documentation/perf-record.txt | 3 +- > tools/perf/builtin-record.c | 1 + > 9 files changed, 429 insertions(+), 78 deletions(-) > > -- > 1.7.11.7 > -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
