On Tue, May 20, 2014 at 08:53:21AM -0600, Alex Williamson wrote:
> The driver_override field allows us to specify the driver for a device
> rather than relying on the driver to provide a positive match of the
> device. This shortcuts the existing process of looking up the vendor
> and device ID, adding them to the driver new_id, binding the device,
> then removing the ID, but it also provides a couple advantages.
>
> First, the above existing process allows the driver to bind to any
> device matching the new_id for the window where it's enabled. This is
> often not desired, such as the case of trying to bind a single device
> to a meta driver like pci-stub or vfio-pci. Using driver_override we
> can do this deterministically using:
>
> echo pci-stub > /sys/bus/pci/devices/0000:03:00.0/driver_override
> echo 0000:03:00.0 > /sys/bus/pci/devices/0000:03:00.0/driver/unbind
> echo 0000:03:00.0 > /sys/bus/pci/drivers_probe
>
> Previously we could not invoke drivers_probe after adding a device
> to new_id for a driver as we get non-deterministic behavior whether
> the driver we intend or the standard driver will claim the device.
> Now it becomes a deterministic process, only the driver matching
> driver_override will probe the device.
>
> To return the device to the standard driver, we simply clear the
> driver_override and reprobe the device:
>
> echo > /sys/bus/pci/devices/0000:03:00.0/driver_override
> echo 0000:03:00.0 > /sys/bus/pci/devices/0000:03:00.0/driver/unbind
> echo 0000:03:00.0 > /sys/bus/pci/drivers_probe
>
> Another advantage to this approach is that we can specify a driver
> override to force a specific binding or prevent any binding. For
> instance when an IOMMU group is exposed to userspace through VFIO
> we require that all devices within that group are owned by VFIO.
> However, devices can be hot-added into an IOMMU group, in which case
> we want to prevent the device from binding to any driver (override
> driver = "none") or perhaps have it automatically bind to vfio-pci.
> With driver_override it's a simple matter for this field to be set
> internally when the device is first discovered to prevent driver
> matches.
>
> Signed-off-by: Alex Williamson <alex.william...@redhat.com>
> Cc: Greg Kroah-Hartman <gre...@linuxfoundation.org>
I applied this with Reviewed-bys/Acks from Konrad, Alexander, and Greg to
pci/virtualization for v3.16, thanks!
> ---
>
> v3: kfree() override buffer on device release, noted by Alex Graf
>
> v2: Use strchr() as suggested by Guenter Roeck and adopted by the
> platform driver version of this same interface.
>
> Documentation/ABI/testing/sysfs-bus-pci | 21 ++++++++++++++++
> drivers/pci/pci-driver.c | 25 +++++++++++++++++--
> drivers/pci/pci-sysfs.c | 40
> +++++++++++++++++++++++++++++++
> drivers/pci/probe.c | 1 +
> include/linux/pci.h | 1 +
> 5 files changed, 85 insertions(+), 3 deletions(-)
>
> diff --git a/Documentation/ABI/testing/sysfs-bus-pci
> b/Documentation/ABI/testing/sysfs-bus-pci
> index a3c5a66..898ddc4 100644
> --- a/Documentation/ABI/testing/sysfs-bus-pci
> +++ b/Documentation/ABI/testing/sysfs-bus-pci
> @@ -250,3 +250,24 @@ Description:
> valid. For example, writing a 2 to this file when sriov_numvfs
> is not 0 and not 2 already will return an error. Writing a 10
> when the value of sriov_totalvfs is 8 will return an error.
> +
> +What: /sys/bus/pci/devices/.../driver_override
> +Date: April 2014
> +Contact: Alex Williamson <alex.william...@redhat.com>
> +Description:
> + This file allows the driver for a device to be specified which
> + will override standard static and dynamic ID matching. When
> + specified, only a driver with a name matching the value written
> + to driver_override will have an opportunity to bind to the
> + device. The override is specified by writing a string to the
> + driver_override file (echo pci-stub > driver_override) and
> + may be cleared with an empty string (echo > driver_override).
> + This returns the device to standard matching rules binding.
> + Writing to driver_override does not automatically unbind the
> + device from its current driver or make any attempt to
> + automatically load the specified driver. If no driver with a
> + matching name is currently loaded in the kernel, the device
> + will not bind to any driver. This also allows devices to
> + opt-out of driver binding using a driver_override name such as
> + "none". Only a single driver may be specified in the override,
> + there is no support for parsing delimiters.
> diff --git a/drivers/pci/pci-driver.c b/drivers/pci/pci-driver.c
> index d911e0c..4393c12 100644
> --- a/drivers/pci/pci-driver.c
> +++ b/drivers/pci/pci-driver.c
> @@ -216,6 +216,13 @@ const struct pci_device_id *pci_match_id(const struct
> pci_device_id *ids,
> return NULL;
> }
>
> +static const struct pci_device_id pci_device_id_any = {
> + .vendor = PCI_ANY_ID,
> + .device = PCI_ANY_ID,
> + .subvendor = PCI_ANY_ID,
> + .subdevice = PCI_ANY_ID,
> +};
> +
> /**
> * pci_match_device - Tell if a PCI device structure has a matching PCI
> device id structure
> * @drv: the PCI driver to match against
> @@ -229,18 +236,30 @@ static const struct pci_device_id
> *pci_match_device(struct pci_driver *drv,
> struct pci_dev *dev)
> {
> struct pci_dynid *dynid;
> + const struct pci_device_id *found_id = NULL;
> +
> + /* When driver_override is set, only bind to the matching driver */
> + if (dev->driver_override && strcmp(dev->driver_override, drv->name))
> + return NULL;
>
> /* Look at the dynamic ids first, before the static ones */
> spin_lock(&drv->dynids.lock);
> list_for_each_entry(dynid, &drv->dynids.list, node) {
> if (pci_match_one_device(&dynid->id, dev)) {
> - spin_unlock(&drv->dynids.lock);
> - return &dynid->id;
> + found_id = &dynid->id;
> + break;
> }
> }
> spin_unlock(&drv->dynids.lock);
>
> - return pci_match_id(drv->id_table, dev);
> + if (!found_id)
> + found_id = pci_match_id(drv->id_table, dev);
> +
> + /* driver_override will always match, send a dummy id */
> + if (!found_id && dev->driver_override)
> + found_id = &pci_device_id_any;
> +
> + return found_id;
> }
>
> struct drv_dev_and_id {
> diff --git a/drivers/pci/pci-sysfs.c b/drivers/pci/pci-sysfs.c
> index 4e0acef..faa4ab5 100644
> --- a/drivers/pci/pci-sysfs.c
> +++ b/drivers/pci/pci-sysfs.c
> @@ -499,6 +499,45 @@ static struct device_attribute sriov_numvfs_attr =
> sriov_numvfs_show, sriov_numvfs_store);
> #endif /* CONFIG_PCI_IOV */
>
> +static ssize_t driver_override_store(struct device *dev,
> + struct device_attribute *attr,
> + const char *buf, size_t count)
> +{
> + struct pci_dev *pdev = to_pci_dev(dev);
> + char *driver_override, *old = pdev->driver_override, *cp;
> +
> + if (count > PATH_MAX)
> + return -EINVAL;
> +
> + driver_override = kstrndup(buf, count, GFP_KERNEL);
> + if (!driver_override)
> + return -ENOMEM;
> +
> + cp = strchr(driver_override, '\n');
> + if (cp)
> + *cp = '\0';
> +
> + if (strlen(driver_override)) {
> + pdev->driver_override = driver_override;
> + } else {
> + kfree(driver_override);
> + pdev->driver_override = NULL;
> + }
> +
> + kfree(old);
> +
> + return count;
> +}
> +
> +static ssize_t driver_override_show(struct device *dev,
> + struct device_attribute *attr, char *buf)
> +{
> + struct pci_dev *pdev = to_pci_dev(dev);
> +
> + return sprintf(buf, "%s\n", pdev->driver_override);
> +}
> +static DEVICE_ATTR_RW(driver_override);
> +
> static struct attribute *pci_dev_attrs[] = {
> &dev_attr_resource.attr,
> &dev_attr_vendor.attr,
> @@ -521,6 +560,7 @@ static struct attribute *pci_dev_attrs[] = {
> #if defined(CONFIG_PM_RUNTIME) && defined(CONFIG_ACPI)
> &dev_attr_d3cold_allowed.attr,
> #endif
> + &dev_attr_driver_override.attr,
> NULL,
> };
>
> diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
> index ef09f5f..54268de 100644
> --- a/drivers/pci/probe.c
> +++ b/drivers/pci/probe.c
> @@ -1215,6 +1215,7 @@ static void pci_release_dev(struct device *dev)
> pci_release_of_node(pci_dev);
> pcibios_release_device(pci_dev);
> pci_bus_put(pci_dev->bus);
> + kfree(pci_dev->driver_override);
> kfree(pci_dev);
> }
>
> diff --git a/include/linux/pci.h b/include/linux/pci.h
> index aab57b4..b72af27 100644
> --- a/include/linux/pci.h
> +++ b/include/linux/pci.h
> @@ -365,6 +365,7 @@ struct pci_dev {
> #endif
> phys_addr_t rom; /* Physical address of ROM if it's not from the BAR */
> size_t romlen; /* Length of ROM if it's not from the BAR */
> + char *driver_override; /* Driver name to force a match */
> };
>
> static inline struct pci_dev *pci_physfn(struct pci_dev *dev)
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
