Relevent messages (erring on the heavy side) ACPI: RSDP (v000 DELL ) @ 0x000fdf00 ACPI: RSDT (v001 DELL CPi R 0x27d4061d ASL 0x00000061) @ 0x1fef0000 ACPI: FADT (v001 DELL CPi R 0x27d4061d ASL 0x00000061) @ 0x1fef0400 ACPI: DSDT (v001 INT430 SYSFexxx 0x00001001 MSFT 0x0100000e) @ 0x00000000 ACPI: PM-Timer IO Port: 0x808 ... ACPI: Subsystem revision 20050211 ACPI: Interpreter enabled ACPI: Using PIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (00:00) PCI: Probing PCI hardware (bus 00) PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1 PCI: Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 *11) ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *11 ACPI: PCI Interrupt Link [LNKC] (IRQs 9 10 *11) ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 9 10 *11) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT] ... i8k: unable to get SMM Dell signature i8k: unable to get SMM BIOS version ... PCI: Using ACPI for IRQ routing ** PCI interrupts are no longer routed automatically. If this ** causes a device to stop working, it is probably because the ** driver failed to call pci_enable_device(). As a temporary ** workaround, the "pci=routeirq" argument restores the old ** behavior. If this argument makes the device work again, ** please email the output of "lspci" to [EMAIL PROTECTED] ** so I can fix the driver. ... apm: BIOS not found. NTFS driver 2.1.22 [Flags: R/W]. ACPI: AC Adapter [AC] (on-line) ACPI: Battery Slot [BAT0] (battery present) ACPI: Lid Switch [LID] ACPI: Power Button (CM) [PBTN] ACPI: Sleep Button (CM) [SBTN] ACPI: Video Device [VID] (multi-head: yes rom: no post: no) ACPI: Video Device [VID2] (multi-head: yes rom: no post: no) ACPI: CPU0 (power states: C1[C1] C2[C2]) ACPI: Processor [CPU0] (supports 8 throttling states) ACPI: Thermal Zone [THM] (56 C) ... ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11 PCI: setting IRQ 11 as level-triggered ACPI: PCI interrupt 0000:00:02.0[A] -> GSI 11 (level, low) -> IRQ 11 ... i8042: ACPI detection disabled i8042.c: Warning: Keylock active. ... i8042: ACPI detection disabled i8042.c: Warning: Keylock active. ... ACPI: PCI interrupt 0000:02:01.0[A] -> GSI 7 (level, low) -> IRQ 7
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/