On Thu, 2005-03-03 at 01:39 -0300, Frédéric L. W. Meunier wrote: > On Thu, 3 Mar 2005, Benjamin Herrenschmidt wrote: > > > On Wed, 2005-03-02 at 23:51 -0300, Frédéric L. W. Meunier wrote: > >> I just replaced my Matrox G400 with a Jetway Radeon 9600LE > >> (256Mb). If I run 'modprobe radeonfb', the monitor blanks out > >> and the power on light keeps flashing. > >> > >> What may be wrong ? Using 2.6.11. > > > > Do you have a way to capture the dmesg log produced ? > > These are the lines before I have to use SysRq. > > Mar 2 15:16:45 darkstar kernel: radeonfb: Found Intel x86 BIOS ROM Image > Mar 2 15:16:45 darkstar kernel: radeonfb: Retreived PLL infos from BIOS > Mar 2 15:16:45 darkstar kernel: i2c-algo-bit.o: dvi passed test. > Mar 2 15:16:45 darkstar kernel: i2c-algo-bit.o: vga passed test. > Mar 2 15:16:46 darkstar kernel: radeonfb: Monitor 1 type CRT found > Mar 2 15:16:46 darkstar kernel: radeonfb: EDID probed > Mar 2 15:16:46 darkstar kernel: radeonfb: Monitor 2 type no found > > BTW, I don't know if it could be related, but my motherboard > only supports AGP 4x
There should be more than these... Does it continue booting afte the screen goes blank or not at all ? Can you send the full dmesg log too ? Also, enable radeonfb verbose debug in the config. > > Also, does it work if radeonfb is built-in ? > > I'll try later. Time to sleep. Ok, thanks. - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/