Dear DT Maintainer,
Could you please review this patch?
Best Regards,
Chanwoo Choi
On 05/28/2014 06:39 PM, Chanwoo Choi wrote:
> This patch add documentation for binding of SM5502 MUIC (Micro-USB Interface
> Controller) device which is using EXTCON subsystem. The SM5502 MUIC device
> can detect various external accessories when external accessories is attached
> or detached.
>
> Signed-off-by: Chanwoo Choi <cw00.c...@samsung.com>
> Cc: Rob Herring <robh...@kernel.org>
> Cc: Pawel Moll <pawel.m...@arm.com>
> Cc: Mark Rutland <mark.rutl...@arm.com>
> Cc: Ian Campbell <ijc+devicet...@hellion.org.uk>
> Cc: Kumar Gala <ga...@codeaurora.org>
> Cc: Randy Dunlap <rdun...@infradead.org>
> Cc: devicet...@vger.kernel.org
> Cc: linux-...@vger.kernel.org
>
> ---
> .../devicetree/bindings/extcon/extcon-sm5502.txt | 23
> ++++++++++++++++++++++
> 1 file changed, 23 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/extcon/extcon-sm5502.txt
>
> diff --git a/Documentation/devicetree/bindings/extcon/extcon-sm5502.txt
> b/Documentation/devicetree/bindings/extcon/extcon-sm5502.txt
> new file mode 100644
> index 0000000..4ecda22
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/extcon/extcon-sm5502.txt
> @@ -0,0 +1,23 @@
> +
> +* SM5502 MUIC (Micro-USB Interface Controller) device
> +
> +The Silicon Mitus SM5502 is a MUIC (Micro-USB Interface Controller) device
> +which can detect the state of external accessory when external accessory is
> +attached or detached and button is pressed or released. It is interfaced to
> +the host controller using an I2C interface.
> +
> +Required properties:
> +- compatible: Should be "siliconmitus,sm5502-muic"
> +- reg: Specifies the I2C slave address of the MUIC block. It should be 0x25
> +- interrupt-parent: Specifies the phandle of the interrupt controller to
> which
> + the interrupts from sm5502 are delivered to.
> +- interrupts: Interrupt specifiers for detection interrupt sources.
> +
> +Example:
> +
> + sm5502@25 {
> + compatible = "siliconmitus,sm5502-muic";
> + interrupt-parent = <&gpx1>;
> + interrupts = <5 0>;
> + reg = <0x25>;
> + };
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
