Hi Mika,
Do I believe correctly that you have reviewed this patch already?
Rafael
On Tuesday, May 20, 2014 08:59:23 PM Lan Tianyu wrote:
> ACPI 5.0 spec(5.5.2.4.5) defines GenericSerialBus(i2c, spi, uart) operation
> region.
> It allows ACPI aml code able to access such kind of devices to implement
> some ACPI standard method.
>
> ACPI Spec defines some access attribute to associate with i2c protocol.
> AttribQuick Read/Write Quick Protocol
> AttribSendReceive Send/Receive Byte Protocol
> AttribByte Read/Write Byte Protocol
> AttribWord Read/Write Word Protocol
> AttribBlock Read/Write Block Protocol
> AttribBytes Read/Write N-Bytes Protocol
> AttribProcessCall Process Call Protocol
> AttribBlockProcessCall Write Block-Read Block Process
> Call Protocol
> AttribRawBytes Raw Read/Write N-BytesProtocol
> AttribRawProcessBytes Raw Process Call Protocol
>
> On the Asus T100TA, Bios use GenericSerialBus operation region to access
> i2c device to get battery info.
>
> Sample code From Asus T100TA
>
> Scope (_SB.I2C1)
> {
> Name (UMPC, ResourceTemplate ()
> {
> I2cSerialBus (0x0066, ControllerInitiated, 0x00061A80,
> AddressingMode7Bit, "\\_SB.I2C1",
> 0x00, ResourceConsumer, ,
> )
> })
>
> ...
>
> OperationRegion (DVUM, GenericSerialBus, Zero, 0x0100)
> Field (DVUM, BufferAcc, NoLock, Preserve)
> {
> Connection (UMPC),
> Offset (0x81),
> AccessAs (BufferAcc, AttribBytes (0x3E)),
> FGC0, 8
> }
> ...
> }
>
> Device (BATC)
> {
> Name (_HID, EisaId ("PNP0C0A")) // _HID: Hardware ID
> Name (_UID, One) // _UID: Unique ID
> ...
>
> Method (_BST, 0, NotSerialized) // _BST: Battery Status
> {
> If (LEqual (AVBL, One))
> {
> Store (FGC0, BFFG)
> If (LNotEqual (STAT, One))
> {
> ShiftRight (CHST, 0x04, Local0)
> And (Local0, 0x03, Local0)
> If (LOr (LEqual (Local0, One), LEqual (Local0, 0x02)))
> {
> Store (0x02, Local1)
> }
> ...
>
> }
>
> The i2c operation region is defined under I2C1 scope. _BST method under
> battery device BATC read battery status from the field "FCG0". The request
> would be sent to i2c operation region handler.
>
> This patch is to add i2c ACPI operation region support. Due to there are
> only "Byte" and "Bytes" protocol access on the Asus T100TA, other protocols
> have not been tested.
>
> About RawBytes and RawProcessBytes protocol, they needs specific drivers to
> interpret
> reference data from AML code according ACPI 5.0 SPEC(5.5.2.4.5.3.9 and
> 5.5.2.4.5.3.10).
> So far, not found such case and will add when find real case.
>
> Signed-off-by: Lan Tianyu <[email protected]>
> ---
> drivers/i2c/Makefile | 5 +-
> drivers/i2c/i2c-acpi.c | 273
> +++++++++++++++++++++++++++++++++++++++++++++++++
> drivers/i2c/i2c-core.c | 2 +
> include/linux/acpi.h | 11 ++
> include/linux/i2c.h | 10 ++
> 5 files changed, 300 insertions(+), 1 deletion(-)
> create mode 100644 drivers/i2c/i2c-acpi.c
>
> diff --git a/drivers/i2c/Makefile b/drivers/i2c/Makefile
> index 1722f50..80db307 100644
> --- a/drivers/i2c/Makefile
> +++ b/drivers/i2c/Makefile
> @@ -2,8 +2,11 @@
> # Makefile for the i2c core.
> #
>
> +i2ccore-y := i2c-core.o
> +i2ccore-$(CONFIG_ACPI) += i2c-acpi.o
> +
> obj-$(CONFIG_I2C_BOARDINFO) += i2c-boardinfo.o
> -obj-$(CONFIG_I2C) += i2c-core.o
> +obj-$(CONFIG_I2C) += i2ccore.o
> obj-$(CONFIG_I2C_SMBUS) += i2c-smbus.o
> obj-$(CONFIG_I2C_CHARDEV) += i2c-dev.o
> obj-$(CONFIG_I2C_MUX) += i2c-mux.o
> diff --git a/drivers/i2c/i2c-acpi.c b/drivers/i2c/i2c-acpi.c
> new file mode 100644
> index 0000000..f7f4c89
> --- /dev/null
> +++ b/drivers/i2c/i2c-acpi.c
> @@ -0,0 +1,273 @@
> +/*
> + * I2C ACPI code
> + *
> + * Copyright (C) 2014 Intel Corp
> + *
> + * Author: Lan Tianyu <[email protected]>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful, but
> + * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
> + * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
> + * for more details.
> + */
> +#define pr_fmt(fmt) "I2C/ACPI : " fmt
> +
> +#include <linux/kernel.h>
> +#include <linux/errno.h>
> +#include <linux/err.h>
> +#include <linux/i2c.h>
> +#include <linux/acpi.h>
> +
> +struct acpi_i2c_handler_data {
> + struct acpi_connection_info info;
> + struct i2c_adapter *adapter;
> +};
> +
> +struct gsb_buffer {
> + u8 status;
> + u8 len;
> + union {
> + u16 wdata;
> + u8 bdata;
> + u8 data[0];
> + };
> +} __packed;
> +
> +static int acpi_gsb_i2c_read_bytes(struct i2c_client *client,
> + u8 cmd, u8 *data, u8 data_len)
> +{
> +
> + struct i2c_msg msgs[2];
> + int ret;
> + u8 *buffer;
> +
> + buffer = kzalloc(data_len, GFP_KERNEL);
> + if (!buffer)
> + return AE_NO_MEMORY;
> +
> + msgs[0].addr = client->addr;
> + msgs[0].flags = client->flags;
> + msgs[0].len = 1;
> + msgs[0].buf = &cmd;
> +
> + msgs[1].addr = client->addr;
> + msgs[1].flags = client->flags | I2C_M_RD;
> + msgs[1].len = data_len;
> + msgs[1].buf = buffer;
> +
> + ret = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs));
> + if (ret < 0)
> + dev_err(&client->adapter->dev, "i2c read failed\n");
> + else
> + memcpy(data, buffer, data_len);
> +
> + kfree(buffer);
> + return ret;
> +}
> +
> +static int acpi_gsb_i2c_write_bytes(struct i2c_client *client,
> + u8 cmd, u8 *data, u8 data_len)
> +{
> +
> + struct i2c_msg msgs[1];
> + u8 *buffer;
> + int ret = AE_OK;
> +
> + buffer = kzalloc(data_len + 1, GFP_KERNEL);
> + if (!buffer)
> + return AE_NO_MEMORY;
> +
> + buffer[0] = cmd;
> + memcpy(buffer + 1, data, data_len);
> +
> + msgs[0].addr = client->addr;
> + msgs[0].flags = client->flags;
> + msgs[0].len = data_len + 1;
> + msgs[0].buf = buffer;
> +
> + ret = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs));
> + if (ret < 0)
> + dev_err(&client->adapter->dev, "i2c write failed\n");
> +
> + kfree(buffer);
> + return ret;
> +}
> +
> +static acpi_status
> +acpi_i2c_space_handler(u32 function, acpi_physical_address command,
> + u32 bits, u64 *value64,
> + void *handler_context, void *region_context)
> +{
> + struct gsb_buffer *gsb = (struct gsb_buffer *)value64;
> + struct acpi_i2c_handler_data *data = handler_context;
> + struct acpi_connection_info *info = &data->info;
> + struct acpi_resource_i2c_serialbus *sb;
> + struct i2c_adapter *adapter = data->adapter;
> + struct i2c_client client;
> + struct acpi_resource *ares;
> + u32 accessor_type = function >> 16;
> + u8 action = function & ACPI_IO_MASK;
> + acpi_status ret = AE_OK;
> + int status;
> +
> + ret = acpi_buffer_to_resource(info->connection, info->length, &ares);
> + if (ACPI_FAILURE(ret))
> + return ret;
> +
> + if (!value64 || ares->type != ACPI_RESOURCE_TYPE_SERIAL_BUS) {
> + ret = AE_BAD_PARAMETER;
> + goto err;
> + }
> +
> + sb = &ares->data.i2c_serial_bus;
> + if (sb->type != ACPI_RESOURCE_SERIAL_TYPE_I2C) {
> + ret = AE_BAD_PARAMETER;
> + goto err;
> + }
> +
> + memset(&client, 0, sizeof(client));
> + client.adapter = adapter;
> + client.addr = sb->slave_address;
> + client.flags = 0;
> +
> + if (sb->access_mode == ACPI_I2C_10BIT_MODE)
> + client.flags |= I2C_CLIENT_TEN;
> +
> + switch (accessor_type) {
> + case ACPI_GSB_ACCESS_ATTRIB_SEND_RCV:
> + if (action == ACPI_READ) {
> + status = i2c_smbus_read_byte(&client);
> + if (status >= 0) {
> + gsb->bdata = status;
> + status = 0;
> + }
> + } else {
> + status = i2c_smbus_write_byte(&client, gsb->bdata);
> + }
> + break;
> +
> + case ACPI_GSB_ACCESS_ATTRIB_BYTE:
> + if (action == ACPI_READ) {
> + status = i2c_smbus_read_byte_data(&client, command);
> + if (status >= 0) {
> + gsb->bdata = status;
> + status = 0;
> + }
> + } else {
> + status = i2c_smbus_write_byte_data(&client, command,
> + gsb->bdata);
> + }
> + break;
> +
> + case ACPI_GSB_ACCESS_ATTRIB_WORD:
> + if (action == ACPI_READ) {
> + status = i2c_smbus_read_word_data(&client, command);
> + if (status >= 0) {
> + gsb->wdata = status;
> + status = 0;
> + }
> + } else {
> + status = i2c_smbus_write_word_data(&client, command,
> + gsb->wdata);
> + }
> + break;
> +
> + case ACPI_GSB_ACCESS_ATTRIB_BLOCK:
> + if (action == ACPI_READ) {
> + status = i2c_smbus_read_block_data(&client, command,
> + gsb->data);
> + if (status >= 0) {
> + gsb->len = status;
> + status = 0;
> + }
> + } else {
> + status = i2c_smbus_write_block_data(&client, command,
> + gsb->len, gsb->data);
> + }
> + break;
> +
> + case ACPI_GSB_ACCESS_ATTRIB_MULTIBYTE:
> + if (action == ACPI_READ) {
> + status = acpi_gsb_i2c_read_bytes(&client, command,
> + gsb->data, info->access_length);
> + if (status > 0)
> + status = 0;
> + } else {
> + status = acpi_gsb_i2c_write_bytes(&client, command,
> + gsb->data, info->access_length);
> + }
> + break;
> +
> + default:
> + pr_info("protocol(0x%02x) is not supported.\n", accessor_type);
> + ret = AE_BAD_PARAMETER;
> + goto err;
> + }
> +
> + gsb->status = status;
> +
> + err:
> + ACPI_FREE(ares);
> + return ret;
> +}
> +
> +
> +int acpi_i2c_install_space_handler(struct i2c_adapter *adapter)
> +{
> + acpi_handle handle = ACPI_HANDLE(adapter->dev.parent);
> + struct acpi_i2c_handler_data *data;
> + acpi_status status;
> +
> + if (!handle)
> + return -ENODEV;
> +
> + data = kzalloc(sizeof(struct acpi_i2c_handler_data),
> + GFP_KERNEL);
> + if (!data)
> + return -ENOMEM;
> +
> + data->adapter = adapter;
> + status = acpi_bus_attach_private_data(handle, (void *)data);
> + if (ACPI_FAILURE(status)) {
> + kfree(data);
> + return -ENOMEM;
> + }
> +
> + status = acpi_install_address_space_handler(handle,
> + ACPI_ADR_SPACE_GSBUS,
> + &acpi_i2c_space_handler,
> + NULL,
> + data);
> + if (ACPI_FAILURE(status)) {
> + dev_err(&adapter->dev, "Error installing i2c space handler\n");
> + acpi_bus_detach_private_data(handle);
> + kfree(data);
> + return -ENOMEM;
> + }
> +
> + return 0;
> +}
> +
> +void acpi_i2c_remove_space_handler(struct i2c_adapter *adapter)
> +{
> + acpi_handle handle = ACPI_HANDLE(adapter->dev.parent);
> + struct acpi_i2c_handler_data *data;
> + acpi_status status;
> +
> + if (!handle)
> + return;
> +
> + acpi_remove_address_space_handler(handle,
> + ACPI_ADR_SPACE_GSBUS,
> + &acpi_i2c_space_handler);
> +
> + status = acpi_bus_get_private_data(handle, (void **)&data);
> + if (ACPI_SUCCESS(status))
> + kfree(data);
> +
> + acpi_bus_detach_private_data(handle);
> +}
> diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c
> index 7c7f4b8..e25cb84 100644
> --- a/drivers/i2c/i2c-core.c
> +++ b/drivers/i2c/i2c-core.c
> @@ -1293,6 +1293,7 @@ exit_recovery:
> /* create pre-declared device nodes */
> of_i2c_register_devices(adap);
> acpi_i2c_register_devices(adap);
> + acpi_i2c_install_space_handler(adap);
>
> if (adap->nr < __i2c_first_dynamic_bus_num)
> i2c_scan_static_board_info(adap);
> @@ -1466,6 +1467,7 @@ void i2c_del_adapter(struct i2c_adapter *adap)
> return;
> }
>
> + acpi_i2c_remove_space_handler(adap);
> /* Tell drivers about this removal */
> mutex_lock(&core_lock);
> bus_for_each_drv(&i2c_bus_type, NULL, adap,
> diff --git a/include/linux/acpi.h b/include/linux/acpi.h
> index 7a8f2cd..ea53b9b 100644
> --- a/include/linux/acpi.h
> +++ b/include/linux/acpi.h
> @@ -361,6 +361,17 @@ extern bool osc_sb_apei_support_acked;
> #define OSC_PCI_EXPRESS_CAPABILITY_CONTROL 0x00000010
> #define OSC_PCI_CONTROL_MASKS 0x0000001f
>
> +#define ACPI_GSB_ACCESS_ATTRIB_QUICK 0x00000002
> +#define ACPI_GSB_ACCESS_ATTRIB_SEND_RCV 0x00000004
> +#define ACPI_GSB_ACCESS_ATTRIB_BYTE 0x00000006
> +#define ACPI_GSB_ACCESS_ATTRIB_WORD 0x00000008
> +#define ACPI_GSB_ACCESS_ATTRIB_BLOCK 0x0000000A
> +#define ACPI_GSB_ACCESS_ATTRIB_MULTIBYTE 0x0000000B
> +#define ACPI_GSB_ACCESS_ATTRIB_WORD_CALL 0x0000000C
> +#define ACPI_GSB_ACCESS_ATTRIB_BLOCK_CALL 0x0000000D
> +#define ACPI_GSB_ACCESS_ATTRIB_RAW_BYTES 0x0000000E
> +#define ACPI_GSB_ACCESS_ATTRIB_RAW_PROCESS 0x0000000F
> +
> extern acpi_status acpi_pci_osc_control_set(acpi_handle handle,
> u32 *mask, u32 req);
>
> diff --git a/include/linux/i2c.h b/include/linux/i2c.h
> index b556e0a..f7a939a 100644
> --- a/include/linux/i2c.h
> +++ b/include/linux/i2c.h
> @@ -577,4 +577,14 @@ static inline struct i2c_adapter
> *of_find_i2c_adapter_by_node(struct device_node
> }
> #endif /* CONFIG_OF */
>
> +#ifdef CONFIG_ACPI
> +int acpi_i2c_install_space_handler(struct i2c_adapter *adapter);
> +void acpi_i2c_remove_space_handler(struct i2c_adapter *adapter);
> +#else
> +static inline void acpi_i2c_remove_space_handler(struct i2c_adapter *adapter)
> +{ }
> +static inline int acpi_i2c_install_space_handler(struct i2c_adapter *adapter)
> +{ return 0; }
> +#endif
> +
> #endif /* _LINUX_I2C_H */
>
--
I speak only for myself.
Rafael J. Wysocki, Intel Open Source Technology Center.
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
