Hello Roger, What a great series!!
On Wed, Jun 11, 2014 at 10:56 AM, Roger Quadros <rog...@ti.com> wrote: > Hi, > > This is a complete functional set to get the gpmc driver out of mach-omap2 > and into drivers/memory. The DT binding remains the same except for the > following minor changes I probably won't have time to do a proper review until at least next week but doing a quick glance it looks very good to me. > - compatible property is required for NAND & OneNAND nodes This is a minor ABI breakage but I agree with you that it is wrong that these were not introduced in the first place and relied on the dev node so I think is not that bad to break it in this case. > - Second register space and interrupts properties are required for > NAND controller node > - ti,onenand-sync-rw property added for OneNAND node. > > The series does the following changes > - Move GPMC IRQ and NAND register handling to NAND driver. > The entire GPMC register space is made available to the NAND driver. > - Clean up NAND device tree handling. Don't rely on legacy platform device > i.e. don't call gpmc_nand_init() > - Add 2 public APIs omap_gpmc_retime() and omap_gpmc_get_clk_period() > omap_gpmc_retime() allows to reconfigure the GPMC settings and timings > for the specified Chip select region. > omap_gpmc_get_clk_period() allows to query the GPMC_CLK (external clock) > period, to perform timing calculations. > Both functions will be needed by the OneNAND driver since it calculates > device timings on the fly and needs to change from Asynchronous mode > to Synchronous mode. > - Setup OneNAND in Asynchronous mode by default and move Synchronous > setting code into OneNAND driver. > - Clean up OneNAND device tree handling. Don't rely on legacy platform device > i.e. don't call gpmc_onenand_init() > - Introduce gpmc_generic_init() that should be used by board files to specify > GPMC chip select setting/timing and platform device within that Chip Select. > - Stop using all gpmc*() that are meant to be private to GPMC driver. > - Move GPMC driver into drivers/memory > > Tested on: > > - beagleboard C4: NAND > - Nokia N900: OneNAND > Do you have a tree somewhere that I can use it to test on the boards I maintain and post patches to update the DTS according the new binding? > Changelog: > > [1] RFC patch - https://lkml.org/lkml/2014/5/21/218 > > cheers, > -roger > > --- > Roger Quadros (36): > ARM: OMAP3: hwmod: Fix gpmc memory resource space > ARM: dts: OMAP2+: Fix GPMC register space size > ARM: OMAP2+: gpmc: Add platform data > ARM: OMAP2+: gpmc: Add gpmc timings and settings to platform data > mtd: nand: omap: Move IRQ handling from GPMC to NAND driver > mtd: nand: omap: Move gpmc_update_nand_reg to nand driver > mtd: nand: omap: Move NAND write protect code from GPMC to NAND driver > mtd: nand: omap: Copy platform data parameters to omap_nand_info data > mtd: nand: omap: Clean up device tree support > ARM: dts: OMAP2+: Fix NAND device nodes > mtd: nand: omap: Update DT binding documentation > ARM: dts: omap3-beagle: Add NAND device > ARM: OMAP2+: gpmc.c: sanity check bank-width DT property > ARM: OMAP2+: gpmc: Allow drivers to reconfigure GPMC settings & > timings > ARM: OMAP2+: gpmc: Allow drivers to query GPMC_CLK period > mtd: onenand: omap: Remove regulator management code > ARM: OMAP2+: gpmc-onenand: Use Async settings/timings by default > ARM: OMAP2+: gpmc-onenand: Move Synchronous setting code to drivers/ > mtd: onenand: omap: Use devres managed resources > mtd: onenand: omap: Clean up device tree support > ARM: dts: OMAP2+: Fix OneNAND device nodes > ARM: OMAP2+: gmpc: add gpmc_generic_init() > ARM: OMAP2+: gpmc: use platform data to configure CS space and > poplulate device > ARM: OMAP2+: gpmc: add NAND specific setup > ARM: OMAP2+: gpmc: Support multiple Chip Selects per device > ARM: OMAP2+: gpmc-smc91x: Get rid of retime() from > omap_smc91x_platform_data > ARM: OMAP2+: usb-tusb6010: Use omap_gpmc_retime() > ARM: OMAP2+: nand: Update gpmc_nand_init() to use generic_gpmc_init() > ARM: OMAP2+: gpmc-smc91x: Use gpmc_generic_init() > ARM: OMAP2+: gpmc-smsc911x: Use gpmc_generic_init() > ARM: OMAP2: usb-tusb6010: Use gpmc_generic_init() > ARM: OMAP2+: onenand: Use gpmc_generic_init() > ARM: OMAP2+: board-flash: Use gpmc_generic_init() for NOR > ARM: OMAP2+: gpmc: Make externally unused functions/defines private > ARM: OMAP2+: gpmc: move GPMC driver into drivers/memory > ARM: OMAP2+: defconfig: Enable TI GPMC driver > > .../devicetree/bindings/mtd/gpmc-nand.txt | 16 +- > .../devicetree/bindings/mtd/gpmc-onenand.txt | 4 + > arch/arm/boot/dts/am335x-evm.dts | 8 +- > arch/arm/boot/dts/am335x-igep0033.dtsi | 8 +- > arch/arm/boot/dts/am33xx.dtsi | 2 +- > arch/arm/boot/dts/am4372.dtsi | 2 +- > arch/arm/boot/dts/am43x-epos-evm.dts | 8 +- > arch/arm/boot/dts/omap2420-n8x0-common.dtsi | 5 +- > arch/arm/boot/dts/omap2420.dtsi | 2 +- > arch/arm/boot/dts/omap2430.dtsi | 2 +- > arch/arm/boot/dts/omap3-beagle.dts | 53 + > arch/arm/boot/dts/omap3-devkit8000.dts | 9 +- > arch/arm/boot/dts/omap3-evm-37xx.dts | 10 +- > arch/arm/boot/dts/omap3-igep0020.dts | 10 +- > arch/arm/boot/dts/omap3-igep0030.dts | 8 +- > arch/arm/boot/dts/omap3-ldp.dts | 10 +- > arch/arm/boot/dts/omap3-lilly-a83x.dtsi | 10 +- > arch/arm/boot/dts/omap3-lilly-dbb056.dts | 7 +- > arch/arm/boot/dts/omap3-n900.dts | 6 +- > arch/arm/boot/dts/omap3-n950-n9.dtsi | 6 +- > arch/arm/boot/dts/omap3.dtsi | 2 +- > arch/arm/boot/dts/omap3430-sdp.dts | 14 +- > arch/arm/boot/dts/omap4.dtsi | 2 +- > arch/arm/boot/dts/omap5.dtsi | 2 +- > arch/arm/configs/omap2plus_defconfig | 2 + > arch/arm/mach-omap2/Makefile | 2 +- > arch/arm/mach-omap2/board-3430sdp.c | 8 +- > arch/arm/mach-omap2/board-flash.c | 28 +- > arch/arm/mach-omap2/gpmc-nand.c | 66 +- > arch/arm/mach-omap2/gpmc-onenand.c | 351 +--- > arch/arm/mach-omap2/gpmc-smc91x.c | 91 +- > arch/arm/mach-omap2/gpmc-smc91x.h | 1 - > arch/arm/mach-omap2/gpmc-smsc911x.c | 76 +- > arch/arm/mach-omap2/gpmc.c | 1872 > -------------------- > arch/arm/mach-omap2/gpmc.h | 221 +-- > arch/arm/mach-omap2/gpmc_legacy.c | 296 ++++ > arch/arm/mach-omap2/omap_hwmod_3xxx_data.c | 2 +- > arch/arm/mach-omap2/usb-tusb6010.c | 172 +- > drivers/memory/Kconfig | 10 + > drivers/memory/Makefile | 1 + > drivers/memory/ti-gpmc.c | 1829 +++++++++++++++++++ > drivers/mtd/nand/Kconfig | 2 +- > drivers/mtd/nand/omap2.c | 364 +++- > drivers/mtd/onenand/Kconfig | 6 +- > drivers/mtd/onenand/omap2.c | 456 +++-- > include/linux/platform_data/gpmc-omap.h | 189 ++ > include/linux/platform_data/mtd-nand-omap2.h | 10 +- > include/linux/platform_data/mtd-onenand-omap2.h | 7 +- > 48 files changed, 3361 insertions(+), 2907 deletions(-) > delete mode 100644 arch/arm/mach-omap2/gpmc.c > create mode 100644 arch/arm/mach-omap2/gpmc_legacy.c > create mode 100644 drivers/memory/ti-gpmc.c > create mode 100644 include/linux/platform_data/gpmc-omap.h > > -- > 1.8.3.2 > Best regards, Javier -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/