After following recent cleanups by Bjorn:
http://git.kernel.org/cgit/linux/kernel/git/helgaas/pci.git/log/?h=pci/hotplug
2cc56f3 PCI: pciehp: Remove assumptions about which commands cause
40b9608 PCI: pciehp: Compute timeout from hotplug command start time
3461a06 PCI: pciehp: Wait for hotplug command completion lazily
4283c70 PCI: pciehp: Make pcie_wait_cmd() self-contained
the bitfield no_cmd_complete is not really needed anymore, as there is
only a single occurance of its use. Hence remove the unnecessary bit
field, and use existing macro NO_CMD_CMPL() instead.
Signed-off-by: Rajat Jain <rajatxj...@gmail.com>
Signed-off-by: Rajat Jain <rajatj...@juniper.net>
Signed-off-by: Guenter Roeck <gro...@juniper.net>
---
(This is rebased on top of Bjorn's pci/hotplug branch mentioned above)
drivers/pci/hotplug/pciehp.h | 1 -
drivers/pci/hotplug/pciehp_hpc.c | 11 +----------
2 files changed, 1 insertion(+), 11 deletions(-)
diff --git a/drivers/pci/hotplug/pciehp.h b/drivers/pci/hotplug/pciehp.h
index c496258..9e5a9fb 100644
--- a/drivers/pci/hotplug/pciehp.h
+++ b/drivers/pci/hotplug/pciehp.h
@@ -96,7 +96,6 @@ struct controller {
struct timer_list poll_timer;
unsigned long cmd_started; /* jiffies */
unsigned int cmd_busy:1;
- unsigned int no_cmd_complete:1;
unsigned int link_active_reporting:1;
unsigned int notification_enabled:1;
unsigned int power_fault_detected;
diff --git a/drivers/pci/hotplug/pciehp_hpc.c b/drivers/pci/hotplug/pciehp_hpc.c
index a3a5c65..f7c3709 100644
--- a/drivers/pci/hotplug/pciehp_hpc.c
+++ b/drivers/pci/hotplug/pciehp_hpc.c
@@ -140,7 +140,7 @@ static void pcie_wait_cmd(struct controller *ctrl)
* If the controller does not generate notifications for command
* completions, we never need to wait between writes.
*/
- if (ctrl->no_cmd_complete)
+ if (NO_CMD_CMPL(ctrl))
return;
if (!ctrl->cmd_busy)
@@ -772,15 +772,6 @@ struct controller *pcie_init(struct pcie_device *dev)
init_waitqueue_head(&ctrl->queue);
dbg_ctrl(ctrl);
- /*
- * Controller doesn't notify of command completion if the "No
- * Command Completed Support" bit is set in Slot Capabilities.
- * If set, it means the controller can accept hotplug commands
- * with no delay between them.
- */
- if (NO_CMD_CMPL(ctrl))
- ctrl->no_cmd_complete = 1;
-
/* Check if Data Link Layer Link Active Reporting is implemented */
pcie_capability_read_dword(pdev, PCI_EXP_LNKCAP, &link_cap);
if (link_cap & PCI_EXP_LNKCAP_DLLLARC) {
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
