Define the at91sam9263 clocks in the SoC dtsi file.

Signed-off-by: Alexandre Belloni <alexandre.bell...@free-electrons.com>
---
 arch/arm/boot/dts/at91sam9263.dtsi | 311 +++++++++++++++++++++++++++++++++++++
 1 file changed, 311 insertions(+)

diff --git a/arch/arm/boot/dts/at91sam9263.dtsi 
b/arch/arm/boot/dts/at91sam9263.dtsi
index fece8665fb63..88a03f453d9d 100644
--- a/arch/arm/boot/dts/at91sam9263.dtsi
+++ b/arch/arm/boot/dts/at91sam9263.dtsi
@@ -10,6 +10,7 @@
 #include <dt-bindings/pinctrl/at91.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/clock/at91.h>
 
 / {
        model = "Atmel AT91SAM9263 family SoC";
@@ -32,6 +33,7 @@
                ssc1 = &ssc1;
                pwm0 = &pwm0;
        };
+
        cpus {
                #address-cells = <0>;
                #size-cells = <0>;
@@ -46,6 +48,20 @@
                reg = <0x20000000 0x08000000>;
        };
 
+       clocks {
+               main_xtal: main_xtal {
+                       compatible = "fixed-clock";
+                       #clock-cells = <0>;
+                       clock-frequency = <0>;
+               };
+
+               slow_xtal: slow_xtal {
+                       compatible = "fixed-clock";
+                       #clock-cells = <0>;
+                       clock-frequency = <0>;
+               };
+       };
+
        ahb {
                compatible = "simple-bus";
                #address-cells = <1>;
@@ -69,6 +85,264 @@
                        pmc: pmc@fffffc00 {
                                compatible = "atmel,at91rm9200-pmc";
                                reg = <0xfffffc00 0x100>;
+                               interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+                               interrupt-controller;
+                               #address-cells = <1>;
+                               #size-cells = <0>;
+                               #interrupt-cells = <1>;
+
+                               main_osc: main_osc {
+                                       compatible = 
"atmel,at91rm9200-clk-main-osc";
+                                       #clock-cells = <0>;
+                                       interrupts-extended = <&pmc 
AT91_PMC_MOSCS>;
+                                       clocks = <&main_xtal>;
+                               };
+
+                               main: mainck {
+                                       compatible = 
"atmel,at91rm9200-clk-main";
+                                       #clock-cells = <0>;
+                                       clocks = <&main_osc>;
+                               };
+
+                               plla: pllack {
+                                       compatible = "atmel,at91rm9200-clk-pll";
+                                       #clock-cells = <0>;
+                                       interrupts-extended = <&pmc 
AT91_PMC_LOCKA>;
+                                       clocks = <&main>;
+                                       reg = <0>;
+                                       atmel,clk-input-range = <1000000 
32000000>;
+                                       #atmel,pll-clk-output-range-cells = <4>;
+                                       atmel,pll-clk-output-ranges = <80000000 
200000000 0 1>,
+                                                               <190000000 
240000000 2 1>;
+                               };
+
+                               pllb: pllbck {
+                                       compatible = "atmel,at91rm9200-clk-pll";
+                                       #clock-cells = <0>;
+                                       interrupts-extended = <&pmc 
AT91_PMC_LOCKB>;
+                                       clocks = <&main>;
+                                       reg = <1>;
+                                       atmel,clk-input-range = <1000000 
5000000>;
+                                       #atmel,pll-clk-output-range-cells = <4>;
+                                       atmel,pll-clk-output-ranges = <70000000 
130000000 1 1>;
+                               };
+
+                               mck: masterck {
+                                       compatible = 
"atmel,at91rm9200-clk-master";
+                                       #clock-cells = <0>;
+                                       interrupts-extended = <&pmc 
AT91_PMC_MCKRDY>;
+                                       clocks = <&slow_xtal>, <&main>, 
<&plla>, <&pllb>;
+                                       atmel,clk-output-range = <0 120000000>;
+                                       atmel,clk-divisors = <1 2 4 0>;
+                               };
+
+                               usb: usbck {
+                                       compatible = "atmel,at91rm9200-clk-usb";
+                                       #clock-cells = <0>;
+                                       atmel,clk-divisors = <1 2 4 0>;
+                                       clocks = <&pllb>;
+                               };
+
+                               prog: progck {
+                                       compatible = 
"atmel,at91rm9200-clk-programmable";
+                                       #address-cells = <1>;
+                                       #size-cells = <0>;
+                                       interrupt-parent = <&pmc>;
+                                       clocks = <&slow_xtal>, <&main>, 
<&plla>, <&pllb>;
+
+                                       prog0: prog0 {
+                                               #clock-cells = <0>;
+                                               reg = <0>;
+                                               interrupts = 
<AT91_PMC_PCKRDY(0)>;
+                                       };
+
+                                       prog1: prog1 {
+                                               #clock-cells = <0>;
+                                               reg = <1>;
+                                               interrupts = 
<AT91_PMC_PCKRDY(1)>;
+                                       };
+
+                                       prog2: prog2 {
+                                               #clock-cells = <0>;
+                                               reg = <2>;
+                                               interrupts = 
<AT91_PMC_PCKRDY(2)>;
+                                       };
+
+                                       prog3: prog3 {
+                                               #clock-cells = <0>;
+                                               reg = <3>;
+                                               interrupts = 
<AT91_PMC_PCKRDY(3)>;
+                                       };
+                               };
+
+                               systemck {
+                                       compatible = 
"atmel,at91rm9200-clk-system";
+                                       #address-cells = <1>;
+                                       #size-cells = <0>;
+
+                                       uhpck: uhpck {
+                                               #clock-cells = <0>;
+                                               reg = <6>;
+                                               clocks = <&usb>;
+                                       };
+
+                                       udpck: udpck {
+                                               #clock-cells = <0>;
+                                               reg = <7>;
+                                               clocks = <&usb>;
+                                       };
+
+                                       pck0: pck0 {
+                                               #clock-cells = <0>;
+                                               reg = <8>;
+                                               clocks = <&prog0>;
+                                       };
+
+                                       pck1: pck1 {
+                                               #clock-cells = <0>;
+                                               reg = <9>;
+                                               clocks = <&prog1>;
+                                       };
+
+                                       pck2: pck2 {
+                                               #clock-cells = <0>;
+                                               reg = <10>;
+                                               clocks = <&prog2>;
+                                       };
+
+                                       pck3: pck3 {
+                                               #clock-cells = <0>;
+                                               reg = <11>;
+                                               clocks = <&prog3>;
+                                       };
+                               };
+
+                               periphck {
+                                       compatible = 
"atmel,at91rm9200-clk-peripheral";
+                                       #address-cells = <1>;
+                                       #size-cells = <0>;
+                                       clocks = <&mck>;
+
+                                       pioA_clk: pioA_clk {
+                                               #clock-cells = <0>;
+                                               reg = <2>;
+                                       };
+
+                                       pioB_clk: pioB_clk {
+                                               #clock-cells = <0>;
+                                               reg = <3>;
+                                       };
+
+                                       pioCDE_clk: pioCDE_clk {
+                                               #clock-cells = <0>;
+                                               reg = <4>;
+                                       };
+
+                                       usart0_clk: usart0_clk {
+                                               #clock-cells = <0>;
+                                               reg = <7>;
+                                       };
+
+                                       usart1_clk: usart1_clk {
+                                               #clock-cells = <0>;
+                                               reg = <8>;
+                                       };
+
+                                       usart2_clk: usart2_clk {
+                                               #clock-cells = <0>;
+                                               reg = <9>;
+                                       };
+
+                                       mci0_clk: mci0_clk {
+                                               #clock-cells = <0>;
+                                               reg = <10>;
+                                       };
+
+                                       mci1_clk: mci1_clk {
+                                               #clock-cells = <0>;
+                                               reg = <11>;
+                                       };
+
+                                       can_clk: can_clk {
+                                               #clock-cells = <0>;
+                                               reg = <12>;
+                                       };
+
+                                       twi0_clk: twi0_clk {
+                                               #clock-cells = <0>;
+                                               reg = <13>;
+                                       };
+
+                                       spi0_clk: spi0_clk {
+                                               #clock-cells = <0>;
+                                               reg = <14>;
+                                       };
+
+                                       spi1_clk: spi1_clk {
+                                               #clock-cells = <0>;
+                                               reg = <15>;
+                                       };
+
+                                       ssc0_clk: ssc0_clk {
+                                               #clock-cells = <0>;
+                                               reg = <16>;
+                                       };
+
+                                       ssc1_clk: ssc1_clk {
+                                               #clock-cells = <0>;
+                                               reg = <17>;
+                                       };
+
+                                       ac91_clk: ac97_clk {
+                                               #clock-cells = <0>;
+                                               reg = <18>;
+                                       };
+
+                                       tc0_clk: tc0_clk {
+                                               #clock-cells = <0>;
+                                               reg = <19>;
+                                       };
+
+                                       pwm_clk: pwm_clk {
+                                               #clock-cells = <0>;
+                                               reg = <20>;
+                                       };
+
+                                       macb0_clk: macb0_clk {
+                                               #clock-cells = <0>;
+                                               reg = <21>;
+                                       };
+
+                                       g2de_clk: g2de_clk {
+                                               #clock-cells = <0>;
+                                               reg = <23>;
+                                       };
+
+                                       udc_clk: udc_clk {
+                                               #clock-cells = <0>;
+                                               reg = <24>;
+                                       };
+
+                                       isi_clk: isi_clk {
+                                               #clock-cells = <0>;
+                                               reg = <25>;
+                                       };
+
+                                       lcd_clk: lcd_clk {
+                                               #clock-cells = <0>;
+                                               reg = <26>;
+                                       };
+
+                                       dma_clk: dma_clk {
+                                               #clock-cells = <0>;
+                                               reg = <27>;
+                                       };
+
+                                       ohci_clk: ohci_clk {
+                                               #clock-cells = <0>;
+                                               reg = <29>;
+                                       };
+                               };
                        };
 
                        ramc: ramc@ffffe200 {
@@ -81,12 +355,15 @@
                                compatible = "atmel,at91sam9260-pit";
                                reg = <0xfffffd30 0xf>;
                                interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+                               clocks = <&mck>;
                        };
 
                        tcb0: timer@fff7c000 {
                                compatible = "atmel,at91rm9200-tcb";
                                reg = <0xfff7c000 0x100>;
                                interrupts = <19 IRQ_TYPE_LEVEL_HIGH 0>;
+                               clocks = <&tc0_clk>;
+                               clock-names = "t0_clk";
                        };
 
                        rstc@fffffd00 {
@@ -403,6 +680,7 @@
                                        gpio-controller;
                                        interrupt-controller;
                                        #interrupt-cells = <2>;
+                                       clocks = <&pioA_clk>;
                                };
 
                                pioB: gpio@fffff400 {
@@ -413,6 +691,7 @@
                                        gpio-controller;
                                        interrupt-controller;
                                        #interrupt-cells = <2>;
+                                       clocks = <&pioB_clk>;
                                };
 
                                pioC: gpio@fffff600 {
@@ -423,6 +702,7 @@
                                        gpio-controller;
                                        interrupt-controller;
                                        #interrupt-cells = <2>;
+                                       clocks = <&pioCDE_clk>;
                                };
 
                                pioD: gpio@fffff800 {
@@ -433,6 +713,7 @@
                                        gpio-controller;
                                        interrupt-controller;
                                        #interrupt-cells = <2>;
+                                       clocks = <&pioCDE_clk>;
                                };
 
                                pioE: gpio@fffffa00 {
@@ -443,6 +724,7 @@
                                        gpio-controller;
                                        interrupt-controller;
                                        #interrupt-cells = <2>;
+                                       clocks = <&pioCDE_clk>;
                                };
                        };
 
@@ -452,6 +734,8 @@
                                interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
                                pinctrl-names = "default";
                                pinctrl-0 = <&pinctrl_dbgu>;
+                               clocks = <&mck>;
+                               clock-names = "usart";
                                status = "disabled";
                        };
 
@@ -463,6 +747,8 @@
                                atmel,use-dma-tx;
                                pinctrl-names = "default";
                                pinctrl-0 = <&pinctrl_usart0>;
+                               clocks = <&usart0_clk>;
+                               clock-names = "usart";
                                status = "disabled";
                        };
 
@@ -474,6 +760,8 @@
                                atmel,use-dma-tx;
                                pinctrl-names = "default";
                                pinctrl-0 = <&pinctrl_usart1>;
+                               clocks = <&usart1_clk>;
+                               clock-names = "usart";
                                status = "disabled";
                        };
 
@@ -485,6 +773,8 @@
                                atmel,use-dma-tx;
                                pinctrl-names = "default";
                                pinctrl-0 = <&pinctrl_usart2>;
+                               clocks = <&usart2_clk>;
+                               clock-names = "usart";
                                status = "disabled";
                        };
 
@@ -494,6 +784,8 @@
                                interrupts = <16 IRQ_TYPE_LEVEL_HIGH 5>;
                                pinctrl-names = "default";
                                pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
+                               clocks = <&ssc0_clk>;
+                               clock-names = "pclk";
                                status = "disabled";
                        };
 
@@ -503,6 +795,8 @@
                                interrupts = <17 IRQ_TYPE_LEVEL_HIGH 5>;
                                pinctrl-names = "default";
                                pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>;
+                               clocks = <&ssc1_clk>;
+                               clock-names = "pclk";
                                status = "disabled";
                        };
 
@@ -512,6 +806,8 @@
                                interrupts = <21 IRQ_TYPE_LEVEL_HIGH 3>;
                                pinctrl-names = "default";
                                pinctrl-0 = <&pinctrl_macb_rmii>;
+                               clocks = <&macb0_clk>, <&macb0_clk>;
+                               clock-names = "hclk", "pclk";
                                status = "disabled";
                        };
 
@@ -519,6 +815,8 @@
                                compatible = "atmel,at91rm9200-udc";
                                reg = <0xfff78000 0x4000>;
                                interrupts = <24 IRQ_TYPE_LEVEL_HIGH 2>;
+                               clocks = <&udc_clk>, <&udpck>;
+                               clock-names = "pclk", "hclk";
                                status = "disabled";
                        };
 
@@ -528,6 +826,7 @@
                                interrupts = <13 IRQ_TYPE_LEVEL_HIGH 6>;
                                #address-cells = <1>;
                                #size-cells = <0>;
+                               clocks = <&twi0_clk>;
                                status = "disabled";
                        };
 
@@ -537,6 +836,8 @@
                                interrupts = <10 IRQ_TYPE_LEVEL_HIGH 0>;
                                #address-cells = <1>;
                                #size-cells = <0>;
+                               clocks = <&mci0_clk>;
+                               clock-names = "mci_clk";
                                status = "disabled";
                        };
 
@@ -546,6 +847,8 @@
                                interrupts = <11 IRQ_TYPE_LEVEL_HIGH 0>;
                                #address-cells = <1>;
                                #size-cells = <0>;
+                               clocks = <&mci1_clk>;
+                               clock-names = "mci_clk";
                                status = "disabled";
                        };
 
@@ -568,6 +871,8 @@
                                interrupts = <14 IRQ_TYPE_LEVEL_HIGH 3>;
                                pinctrl-names = "default";
                                pinctrl-0 = <&pinctrl_spi0>;
+                               clocks = <&spi0_clk>;
+                               clock-names = "spi_clk";
                                status = "disabled";
                        };
 
@@ -579,6 +884,8 @@
                                interrupts = <15 IRQ_TYPE_LEVEL_HIGH 3>;
                                pinctrl-names = "default";
                                pinctrl-0 = <&pinctrl_spi1>;
+                               clocks = <&spi1_clk>;
+                               clock-names = "spi_clk";
                                status = "disabled";
                        };
 
@@ -587,6 +894,8 @@
                                reg = <0xfffb8000 0x300>;
                                interrupts = <20 IRQ_TYPE_LEVEL_HIGH 4>;
                                #pwm-cells = <3>;
+                               clocks = <&pwm_clk>;
+                               clock-names = "pwm_clk";
                                status = "disabled";
                        };
                };
@@ -622,6 +931,8 @@
                        compatible = "atmel,at91rm9200-ohci", "usb-ohci";
                        reg = <0x00a00000 0x100000>;
                        interrupts = <29 IRQ_TYPE_LEVEL_HIGH 2>;
+                       clocks = <&usb>, <&ohci_clk>, <&ohci_clk>, <&uhpck>;
+                       clock-names = "usb_clk", "ohci_clk", "hclk", "uhpck";
                        status = "disabled";
                };
        };
-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Reply via email to