On 06/26/2014 11:45 PM, Javier Martinez Canillas wrote:
> Peach pit and pi boards uses a Maxim 77802 power management
> IC to drive regulators and its Real Time Clock. This patch
> adds support for this chip.
>
> These are the device nodes and pinctrl configuration that
> are present on the Peach pit DeviceTree source file in the
> the Chrome OS kernel 3.8 tree.
>
> Signed-off-by: Javier Martinez Canillas <[email protected]>
> Tested-by: Naveen Krishna Chatradhi <[email protected]>
> ---
[ ... ]
> +
> + regulators {
> + buck1_reg: BUCK1 {
> + regulator-name = "vdd_mif";
> + regulator-min-microvolt = <800000>;
> + regulator-max-microvolt = <1300000>;
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-ramp-delay = <12500>;
> + };
IMO, adding a blank line between sub-nodes would be better.
> + buck2_reg: BUCK2 {
> + regulator-name = "vdd_arm_real";
> + regulator-min-microvolt = <800000>;
> + regulator-max-microvolt = <1500000>;
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-ramp-delay = <12500>;
> + };
[ ... ]
> + vqmmc_sdcard: ldo4_reg: LDO4 {
> + regulator-name = "vdd_sd";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <2800000>;
> + regulator-always-on;
> +
Blank line, can be removed.
> + };
[ ... ]
> + ldo23_reg: LDO23 {
> + regulator-name = "ld0_23";
ldo_23, 'o' in place of '0'.
Similar comments for peach-pi DTS file.
--
Tushar Behera
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
