I have a dvd+-rw drive (LITE-ON DVDRW LDW-411S with FS0K firmware). The drive appears to opperate correctly. I can mount media, read from it, and burn just fine, but printk output indicates some error.
2.6.10: hdc: packet command error: status=0x51 { DriveReady SeekComplete Error } hdc: packet command error: error=0x54 ide: failed opcode was 100 2.6.11: hdc: packet command error: status=0x51 { DriveReady SeekComplete Error } hdc: packet command error: error=0x54 { AbortedCommand LastFailedSense=0x05 } ide: failed opcode was: unknown These messages do not appear if media is not in the tray. If media is in the tray, these messages will repeat continuously (at a rate of about 2 per second). The media doesn't need to be mounted, just present. Additionally, this did not occur when this drive was in an i686 box, but it does occur now that it is in an x86_64 box. Has anyone seen a problem like this or have any suggestions? Thanks, Jeremy
signature.asc
Description: This is a digitally signed message part