On 04/07/2014 04:26, Michael Welling :
> The code has a variable to change the polarity of the PWM backlight control 
> but
> it was not being initialized. This patch adds a devicetree entry to set the
> variable if required.
> 
> Signed-off-by: Michael Welling <mwell...@ieee.org>

Seems good


Acked-by: Nicolas Ferre <nicolas.fe...@atmel.com>


> ---
>  .../devicetree/bindings/video/atmel,lcdc.txt       |    1 +
>  drivers/video/fbdev/atmel_lcdfb.c                  |    3 ++-
>  2 files changed, 3 insertions(+), 1 deletion(-)
> 
> diff --git a/Documentation/devicetree/bindings/video/atmel,lcdc.txt 
> b/Documentation/devicetree/bindings/video/atmel,lcdc.txt
> index 1ec175e..b75af94 100644
> --- a/Documentation/devicetree/bindings/video/atmel,lcdc.txt
> +++ b/Documentation/devicetree/bindings/video/atmel,lcdc.txt
> @@ -46,6 +46,7 @@ Required properties (as per of_videomode_helper):
>  
>  Optional properties (as per of_videomode_helper):
>   - atmel,lcdcon-backlight: enable backlight
> + - atmel,lcdcon-backlight-inverted: invert backlight PWM polarity
>   - atmel,lcd-wiring-mode: lcd wiring mode "RGB" or "BRG"
>   - atmel,power-control-gpio: gpio to power on or off the LCD (as many as 
> needed)
>  
> diff --git a/drivers/video/fbdev/atmel_lcdfb.c 
> b/drivers/video/fbdev/atmel_lcdfb.c
> index d36e830..92640d4 100644
> --- a/drivers/video/fbdev/atmel_lcdfb.c
> +++ b/drivers/video/fbdev/atmel_lcdfb.c
> @@ -290,7 +290,7 @@ static void init_contrast(struct atmel_lcdfb_info *sinfo)
>  
>       /* contrast pwm can be 'inverted' */
>       if (pdata->lcdcon_pol_negative)
> -                     contrast_ctr &= ~(ATMEL_LCDC_POL_POSITIVE);
> +             contrast_ctr &= ~(ATMEL_LCDC_POL_POSITIVE);
>  
>       /* have some default contrast/backlight settings */
>       lcdc_writel(sinfo, ATMEL_LCDC_CONTRAST_CTR, contrast_ctr);
> @@ -1097,6 +1097,7 @@ static int atmel_lcdfb_of_init(struct atmel_lcdfb_info 
> *sinfo)
>       pdata->lcd_wiring_mode = ret;
>  
>       pdata->lcdcon_is_backlight = of_property_read_bool(display_np, 
> "atmel,lcdcon-backlight");
> +     pdata->lcdcon_pol_negative = of_property_read_bool(display_np, 
> "atmel,lcdcon-backlight-inverted");
>  
>       timings = of_get_display_timings(display_np);
>       if (!timings) {
> 


-- 
Nicolas Ferre
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Reply via email to