On Mon, Jun 30, 2014 at 2:26 PM, Sachin Kamat <sachin.ka...@samsung.com> wrote: > Since the USB 2.0 PHYs are required only with EHCI/OHCI USB drivers, > make it depend on them and default to ARCH_EXYNOS as they are meant > for Exynos platforms. Also, make the sub-drivers silent options enabling > them based on the SoC platforms that they are meant to work with. This > will make life easier for end users who do not have any way knowing the > dependencies. > > Signed-off-by: Sachin Kamat <sachin.ka...@samsung.com> > --- > drivers/phy/Kconfig | 35 +++++++++++------------------------ > 1 file changed, 11 insertions(+), 24 deletions(-) > > diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig > index 16a2f067c242..9aab5dfb0adf 100644 > --- a/drivers/phy/Kconfig > +++ b/drivers/phy/Kconfig > @@ -122,43 +122,30 @@ config PHY_SUN4I_USB > > config PHY_SAMSUNG_USB2 > tristate "Samsung USB 2.0 PHY driver" > + depends on USB_EHCI_EXYNOS || USB_OHCI_EXYNOS > select GENERIC_PHY > select MFD_SYSCON > + default ARCH_EXYNOS > help > Enable this to support the Samsung USB 2.0 PHY driver for Samsung > - SoCs. This driver provides the interface for USB 2.0 PHY. Support > for > - particular SoCs has to be enabled in addition to this driver. Number > - and type of supported phys depends on the SoC. > + SoCs. This driver provides the interface for USB 2.0 PHY. Support > + for particular PHYs will be enabled based on the SoC type in > addition > + to this driver. > > config PHY_EXYNOS4210_USB2 > - bool "Support for Exynos 4210" > + bool > depends on PHY_SAMSUNG_USB2 > - depends on CPU_EXYNOS4210 > - help > - Enable USB PHY support for Exynos 4210. This option requires that > - Samsung USB 2.0 PHY driver is enabled and means that support for > this > - particular SoC is compiled in the driver. In case of Exynos 4210 > four > - phys are available - device, host, HSIC0 and HSIC1. > + default CPU_EXYNOS4210 > > config PHY_EXYNOS4X12_USB2 > - bool "Support for Exynos 4x12" > + bool > depends on PHY_SAMSUNG_USB2 > - depends on (SOC_EXYNOS4212 || SOC_EXYNOS4412) > - help > - Enable USB PHY support for Exynos 4x12. This option requires that > - Samsung USB 2.0 PHY driver is enabled and means that support for > this > - particular SoC is compiled in the driver. In case of Exynos 4x12 > four > - phys are available - device, host, HSIC0 and HSIC1. > + default SOC_EXYNOS4212 || SOC_EXYNOS4412 > > config PHY_EXYNOS5250_USB2 > - bool "Support for Exynos 5250" > + bool > depends on PHY_SAMSUNG_USB2 > - depends on SOC_EXYNOS5250 > - help > - Enable USB PHY support for Exynos 5250. This option requires that > - Samsung USB 2.0 PHY driver is enabled and means that support for > this > - particular SoC is compiled in the driver. In case of Exynos 5250 > four > - phys are available - device, host, HSIC0 and HSIC. > + default SOC_EXYNOS5250 || SOC_EXYNOS5420 > > config PHY_EXYNOS5_USBDRD > tristate "Exynos5 SoC series USB DRD PHY driver" > -- > 1.7.9.5
Kishon, Any comments on these patches? -- Regards, Sachin. -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
