Hi Jingoo,
On Tuesday 08 July 2014 06:47 PM, Jingoo Han wrote:
> On Tuesday, July 08, 2014 9:31 PM, Kishon Vijay Abraham I wrote:
>>
>> Hi Mohit, Jingoo,
>>
>> On Wednesday 25 June 2014 11:26 PM, Kishon Vijay Abraham I wrote:
>>> In DRA7, the cpu sees 32bit address, but the pcie controller can see only
>>> 28bit
>>> address. So whenever the cpu issues a read/write request, the 4 most
>>> significant bits are used by L3 to determine the target controller.
>>> For example, the cpu reserves 0x2000_0000 - 0x2FFF_FFFF for PCIe controller
>>> but
>>> the PCIe controller will see only (0x000_0000 - 0xFFF_FFF). So for
>>> programming
>>> the outbound translation window the *base* should be programmed as
>>> 0x000_0000.
>>> Whenever we try to write to say 0x2000_0000, it will be translated to
>>> whatever
>>> we have programmed in the translation window with base as 0x000_0000.
>>>
>>> This is needed when the dt node is modelled something like below
>>> axi {
>>> compatible = "simple-bus";
>>> #size-cells = <1>;
>>> #address-cells = <1>;
>>> ranges = <0x0 0x20000000 0x10000000 // 28-bit bus
>>> 0x51000000 0x51000000 0x3000>;
>>> pcie@51000000 {
>>> reg = <0x1000 0x2000>, <0x51002000 0x14c>, <0x51000000 0x2000>;
>>> reg-names = "config", "ti_conf", "rc_dbics";
>>> #address-cells = <3>;
>>> #size-cells = <2>;
>>> ranges = <0x81000000 0 0 0x03000 0 0x00010000
>>> 0x82000000 0 0x20013000 0x13000 0 0xffed000>;
>>> };
>>> };
>>>
>>> Here the CPU address for configuration space is 0x20013000 and the
>>> controller
>>> address for configuration space is 0x13000. The controller address should be
>>> used while programming the ATU (in order for translation to happen properly
>>> in
>>> DRA7xx).
>>
>> Are you okay with this patch? Can you give your Reviewed-by/Acked-by?
>
> Sorry, I cannot understand fully what this patch does. :-(
> However, I have some questions as below.
>
> 1. io_mod_addr
> The 'io_mod_addr' variable is not used. Then, how about removing
> 'io_mod_addr' from this patch?
Actually I missed using it in io_outbound(). Will fix it.
>
> 2. ranges
> In the case of Exynos PCIe, there is no limitation such as 28bit for
> access. Then, when there is no 'ranges' property in DT file, is there
> no side effect? I mean the compatibility with other SoC's PCIe drivers.
It shouldn't break anything. The ranges is used to resolve cpu address while
adding resources to the device. So in other SoCs it'll use use the parent
'ranges' which is usually ocp/simple-bus to resolve cpu address. In my case it
has to use the axi ranges. So other SoCs shouldn't be impacted.
>
> 3. _addr post fix
>
> How about renaming 'cfg0_mod_addr', 'mem_mod_addr' as below?
sure.
Thanks
Kishon
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
