On Thu, 10 Jul 2014, amit daniel kachhap wrote:
> Adding MFD maintainers.
Why, what for?
> On Tue, Jul 8, 2014 at 5:57 PM, Amit Daniel Kachhap
> <amit.dan...@samsung.com> wrote:
> > This patch makes the regulator description macro take minimum and
> > steps voltage as parameter. In this way many repeated macros can be
> > removed. Now these macros are repeated only if the the LDO/BUCK ctrl
> > registers have non-linear positions. The good thing is these ctrl registers
> > are mostly linear so they are not passed as parameters.
> >
> > This patch reduces the code size and also allow easy addition of more
> > s2mpxxx PMIC drivers which differs a lot in minimum/step voltages.
> >
> > Signed-off-by: Amit Daniel Kachhap <amit.dan...@samsung.com>
> > ---
> > drivers/regulator/s2mpa01.c | 136
> > ++++++++++++--------------------------------
> > 1 file changed, 37 insertions(+), 99 deletions(-)
> >
> > diff --git a/drivers/regulator/s2mpa01.c b/drivers/regulator/s2mpa01.c
> > index 962c5f1..8073466 100644
> > --- a/drivers/regulator/s2mpa01.c
> > +++ b/drivers/regulator/s2mpa01.c
> > @@ -235,28 +235,14 @@ static struct regulator_ops s2mpa01_buck_ops = {
> > .set_ramp_delay = s2mpa01_set_ramp_delay,
> > };
> >
> > -#define regulator_desc_ldo1(num) { \
> > +#define regulator_desc_ldo(num, min, step) { \
> > .name = "LDO"#num, \
> > .id = S2MPA01_LDO##num, \
> > .ops = &s2mpa01_ldo_ops, \
> > .type = REGULATOR_VOLTAGE, \
> > .owner = THIS_MODULE, \
> > - .min_uV = MIN_800_MV, \
> > - .uV_step = STEP_50_MV, \
> > - .n_voltages = S2MPA01_LDO_N_VOLTAGES, \
> > - .vsel_reg = S2MPA01_REG_L1CTRL + num - 1, \
> > - .vsel_mask = S2MPA01_LDO_VSEL_MASK, \
> > - .enable_reg = S2MPA01_REG_L1CTRL + num - 1, \
> > - .enable_mask = S2MPA01_ENABLE_MASK \
> > -}
> > -#define regulator_desc_ldo2(num) { \
> > - .name = "LDO"#num, \
> > - .id = S2MPA01_LDO##num, \
> > - .ops = &s2mpa01_ldo_ops, \
> > - .type = REGULATOR_VOLTAGE, \
> > - .owner = THIS_MODULE, \
> > - .min_uV = MIN_800_MV, \
> > - .uV_step = STEP_25_MV, \
> > + .min_uV = min, \
> > + .uV_step = step, \
> > .n_voltages = S2MPA01_LDO_N_VOLTAGES, \
> > .vsel_reg = S2MPA01_REG_L1CTRL + num - 1, \
> > .vsel_mask = S2MPA01_LDO_VSEL_MASK, \
> > @@ -296,14 +282,14 @@ static struct regulator_ops s2mpa01_buck_ops = {
> > .enable_mask = S2MPA01_ENABLE_MASK \
> > }
> >
> > -#define regulator_desc_buck6_7(num) { \
> > +#define regulator_desc_buck6_10(num, min, step) { \
> > .name = "BUCK"#num, \
> > .id = S2MPA01_BUCK##num, \
> > .ops = &s2mpa01_buck_ops, \
> > .type = REGULATOR_VOLTAGE, \
> > .owner = THIS_MODULE, \
> > - .min_uV = MIN_600_MV, \
> > - .uV_step = STEP_6_25_MV, \
> > + .min_uV = min, \
> > + .uV_step = step, \
> > .n_voltages = S2MPA01_BUCK_N_VOLTAGES, \
> > .ramp_delay = S2MPA01_RAMP_DELAY, \
> > .vsel_reg = S2MPA01_REG_B6CTRL2 + (num - 6) * 2, \
> > @@ -312,91 +298,43 @@ static struct regulator_ops s2mpa01_buck_ops = {
> > .enable_mask = S2MPA01_ENABLE_MASK \
> > }
> >
> > -#define regulator_desc_buck8 { \
> > - .name = "BUCK8", \
> > - .id = S2MPA01_BUCK8, \
> > - .ops = &s2mpa01_buck_ops, \
> > - .type = REGULATOR_VOLTAGE, \
> > - .owner = THIS_MODULE, \
> > - .min_uV = MIN_800_MV, \
> > - .uV_step = STEP_12_5_MV, \
> > - .n_voltages = S2MPA01_BUCK_N_VOLTAGES, \
> > - .ramp_delay = S2MPA01_RAMP_DELAY, \
> > - .vsel_reg = S2MPA01_REG_B8CTRL2, \
> > - .vsel_mask = S2MPA01_BUCK_VSEL_MASK, \
> > - .enable_reg = S2MPA01_REG_B8CTRL1, \
> > - .enable_mask = S2MPA01_ENABLE_MASK \
> > -}
> > -
> > -#define regulator_desc_buck9 { \
> > - .name = "BUCK9", \
> > - .id = S2MPA01_BUCK9, \
> > - .ops = &s2mpa01_buck_ops, \
> > - .type = REGULATOR_VOLTAGE, \
> > - .owner = THIS_MODULE, \
> > - .min_uV = MIN_1500_MV, \
> > - .uV_step = STEP_12_5_MV, \
> > - .n_voltages = S2MPA01_BUCK_N_VOLTAGES, \
> > - .ramp_delay = S2MPA01_RAMP_DELAY, \
> > - .vsel_reg = S2MPA01_REG_B9CTRL2, \
> > - .vsel_mask = S2MPA01_BUCK_VSEL_MASK, \
> > - .enable_reg = S2MPA01_REG_B9CTRL1, \
> > - .enable_mask = S2MPA01_ENABLE_MASK \
> > -}
> > -
> > -#define regulator_desc_buck10 { \
> > - .name = "BUCK10", \
> > - .id = S2MPA01_BUCK10, \
> > - .ops = &s2mpa01_buck_ops, \
> > - .type = REGULATOR_VOLTAGE, \
> > - .owner = THIS_MODULE, \
> > - .min_uV = MIN_1000_MV, \
> > - .uV_step = STEP_12_5_MV, \
> > - .n_voltages = S2MPA01_BUCK_N_VOLTAGES, \
> > - .ramp_delay = S2MPA01_RAMP_DELAY, \
> > - .vsel_reg = S2MPA01_REG_B10CTRL2, \
> > - .vsel_mask = S2MPA01_BUCK_VSEL_MASK, \
> > - .enable_reg = S2MPA01_REG_B10CTRL1, \
> > - .enable_mask = S2MPA01_ENABLE_MASK \
> > -}
> > -
> > static struct regulator_desc regulators[] = {
> > - regulator_desc_ldo2(1),
> > - regulator_desc_ldo1(2),
> > - regulator_desc_ldo1(3),
> > - regulator_desc_ldo1(4),
> > - regulator_desc_ldo1(5),
> > - regulator_desc_ldo2(6),
> > - regulator_desc_ldo1(7),
> > - regulator_desc_ldo1(8),
> > - regulator_desc_ldo1(9),
> > - regulator_desc_ldo1(10),
> > - regulator_desc_ldo2(11),
> > - regulator_desc_ldo1(12),
> > - regulator_desc_ldo1(13),
> > - regulator_desc_ldo1(14),
> > - regulator_desc_ldo1(15),
> > - regulator_desc_ldo1(16),
> > - regulator_desc_ldo1(17),
> > - regulator_desc_ldo1(18),
> > - regulator_desc_ldo1(19),
> > - regulator_desc_ldo1(20),
> > - regulator_desc_ldo1(21),
> > - regulator_desc_ldo2(22),
> > - regulator_desc_ldo2(23),
> > - regulator_desc_ldo1(24),
> > - regulator_desc_ldo1(25),
> > - regulator_desc_ldo1(26),
> > + regulator_desc_ldo(1, MIN_800_MV, STEP_25_MV),
> > + regulator_desc_ldo(2, MIN_800_MV, STEP_50_MV),
> > + regulator_desc_ldo(3, MIN_800_MV, STEP_50_MV),
> > + regulator_desc_ldo(4, MIN_800_MV, STEP_50_MV),
> > + regulator_desc_ldo(5, MIN_800_MV, STEP_50_MV),
> > + regulator_desc_ldo(6, MIN_800_MV, STEP_25_MV),
> > + regulator_desc_ldo(7, MIN_800_MV, STEP_50_MV),
> > + regulator_desc_ldo(8, MIN_800_MV, STEP_50_MV),
> > + regulator_desc_ldo(9, MIN_800_MV, STEP_50_MV),
> > + regulator_desc_ldo(10, MIN_800_MV, STEP_50_MV),
> > + regulator_desc_ldo(11, MIN_800_MV, STEP_25_MV),
> > + regulator_desc_ldo(12, MIN_800_MV, STEP_50_MV),
> > + regulator_desc_ldo(13, MIN_800_MV, STEP_50_MV),
> > + regulator_desc_ldo(14, MIN_800_MV, STEP_50_MV),
> > + regulator_desc_ldo(15, MIN_800_MV, STEP_50_MV),
> > + regulator_desc_ldo(16, MIN_800_MV, STEP_50_MV),
> > + regulator_desc_ldo(17, MIN_800_MV, STEP_50_MV),
> > + regulator_desc_ldo(18, MIN_800_MV, STEP_50_MV),
> > + regulator_desc_ldo(19, MIN_800_MV, STEP_50_MV),
> > + regulator_desc_ldo(20, MIN_800_MV, STEP_50_MV),
> > + regulator_desc_ldo(21, MIN_800_MV, STEP_50_MV),
> > + regulator_desc_ldo(22, MIN_800_MV, STEP_25_MV),
> > + regulator_desc_ldo(23, MIN_800_MV, STEP_25_MV),
> > + regulator_desc_ldo(24, MIN_800_MV, STEP_50_MV),
> > + regulator_desc_ldo(25, MIN_800_MV, STEP_50_MV),
> > + regulator_desc_ldo(26, MIN_800_MV, STEP_50_MV),
> > regulator_desc_buck1_4(1),
> > regulator_desc_buck1_4(2),
> > regulator_desc_buck1_4(3),
> > regulator_desc_buck1_4(4),
> > regulator_desc_buck5,
> > - regulator_desc_buck6_7(6),
> > - regulator_desc_buck6_7(7),
> > - regulator_desc_buck8,
> > - regulator_desc_buck9,
> > - regulator_desc_buck10,
> > + regulator_desc_buck6_10(6, MIN_600_MV, STEP_6_25_MV),
> > + regulator_desc_buck6_10(7, MIN_600_MV, STEP_6_25_MV),
> > + regulator_desc_buck6_10(8, MIN_800_MV, STEP_12_5_MV),
> > + regulator_desc_buck6_10(9, MIN_1500_MV, STEP_12_5_MV),
> > + regulator_desc_buck6_10(10, MIN_1000_MV, STEP_12_5_MV),
> > };
> >
> > static int s2mpa01_pmic_probe(struct platform_device *pdev)
> >
--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
