Does GK20A itself have any kind of thermal protection capabilities?
Upstream SOCTHERM support is not yet available (though I have a driver
in my tree), so we are thinking of disabling CPU DVFS on boards that
don't have always-on active cooling for now. Same might be necessary for
GPU as well.
On 10/07/14 10:34, Alexandre Courbot wrote:
This series adds support for reclocking on GK20A. The first two patches touch
the clock subsystem to allow GK20A to operate, by making the presence of the
thermal and voltage devices optional, and allowing pstates to be provided
directly instead of being probed using the BIOS (which Tegra does not have).
The last patch adds the GK20A clock device. Arguably the clock can be seen as a
stripped-down version of what is seen on NVE0, however instead of using NVE0
support has been written from scratch using the ChromeOS kernel as a basis.
There are several reasons for this:
- The ChromeOS driver uses a lookup table for the P coefficient which I could
not find in the NVE0 driver,
- Some registers that NVE0 expects to find are not present on GK20A (e.g.
0x137120 and 0x137140),
- Calculation of MNP is done differently from what is performed in
nva3_pll_calc(), and it might be interesting to compare the two methods,
- All the same, the programming sequence is done differently in the ChromeOS
driver and NVE0 could possibly benefit from it (?)
It would be interesting to try and merge both, but for now I prefer to have the
two coexisting to ensure proper operation on GK20A and besure I don't break
dGPU support. :)
Regarding the first patch, one might argue that I could as well add thermal
and voltage devices to GK20A. The reason this is not done is because these
currently depend heavily on the presence of a BIOS, and will require a rework
similar to that done in patch 2 for clocks. I would like to make sure this
approach is approved because applying it to other subdevs.
Alexandre Courbot (3):
drm/nouveau/clk: make therm and volt devices optional
drm/nouveau/clk: support for non-BIOS pstates
drm/gk20a: reclocking support
drivers/gpu/drm/nouveau/Makefile | 1 +
drivers/gpu/drm/nouveau/core/engine/device/nve0.c | 1 +
.../gpu/drm/nouveau/core/include/subdev/clock.h | 9 +-
drivers/gpu/drm/nouveau/core/subdev/clock/base.c | 52 +-
drivers/gpu/drm/nouveau/core/subdev/clock/gk20a.c | 670 +++++++++++++++++++++
drivers/gpu/drm/nouveau/core/subdev/clock/nv04.c | 4 +-
drivers/gpu/drm/nouveau/core/subdev/clock/nv40.c | 4 +-
drivers/gpu/drm/nouveau/core/subdev/clock/nv50.c | 2 +-
drivers/gpu/drm/nouveau/core/subdev/clock/nva3.c | 4 +-
drivers/gpu/drm/nouveau/core/subdev/clock/nvaa.c | 4 +-
drivers/gpu/drm/nouveau/core/subdev/clock/nvc0.c | 4 +-
drivers/gpu/drm/nouveau/core/subdev/clock/nve0.c | 4 +-
12 files changed, 725 insertions(+), 34 deletions(-)
create mode 100644 drivers/gpu/drm/nouveau/core/subdev/clock/gk20a.c
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/