On 07/10/2014 05:26 PM, Maxime Ripard wrote:
On Wed, Jul 09, 2014 at 04:32:03PM -0700, Stephen Boyd wrote:
On 07/09/14 01:35, Maxime Ripard wrote:
Hi Stephen,
On Tue, Jul 08, 2014 at 01:00:23PM -0700, Stephen Boyd wrote:
Hi,
On MSM chips we have some efuses (called qfprom) where we store things
like calibration data, speed bins, etc. We need to read out data from
the efuses in various drivers like the cpufreq, thermal, etc. This
essentially boils down to a bunch of readls on the efuse from a handful
of different drivers. In devicetree this looks a little odd because
these drivers end up having an extra reg property (or two) that points
to a register in the efuse and some length, i.e you see this:
thermal-sensor@34000 {
compatible = "sensor";
reg = <0x34000 0x1000>, <0x10018 0xc>;
reg-names = "sensor", "efuse_calib";
}
I imagine in DT we want something more like this:
efuse: efuse@10000 {
compatible = "efuse";
reg = <0x10000 0x1000>;
}
thermal-sensor@34000 {
compatible = "sensor";
reg = <0x34000 0x1000>;
efuse = <&efuse 0x18>;
}
Why don't use "syscon" framework for your needs? (mfd/syscon.c)
We have pretty much the same things in the Allwinner SoCs. We have an
efuse directly mapped into memory, with a few informations like a MAC
address, the SoC ID, the serial number, some RSA keys for the device,
etc.
The thing is, some boards expose these informations in an external
EEPROM as well.
I started working and went quite far to create an "eeprom" framework
to handle these cases, with a dt representation similar to what you
were exposing.
https://github.com/mripard/linux/tree/eeprom-framework-at24
It was working quite well, I was about to send it, but was told that I
should all be moved to MTD, and given up on it.
Did anything ever get merged? Or the whole thing was dropped?
Nope, I just never posted it. I could send it as an RFC though, and
see what are the feedbacks.
That branch looks like what I want, assuming we could get an agreement
on the binding. It looks like pretty much every SoC has this, and there
isn't any API or binding for it that I've seen. The only thing I see is
Documentation/devicetree/bindings/eeprom.txt and that doesn't cover the
client aspect at all.
Taking a quick peek at the code, it might be better to change the read
API to take a buffer and length, so that the caller doesn't need to free
the data allocated by the eeprom layer. It also makes it symmetrical
with the write API. We'd probably also need to make it work really early
for SoC's like Tegra where we want to read the SoC revision early. So
probably split off the device registration part to a later time to allow
register() to be called early.
I guess that the kind of things we could discuss after posting these
patches, but yep, it looks reasonnable.
I'll try to get things a bit cleaner, and post them in the next days.
Regards,
-grygorii
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
