Supply top level nodes for the STiH416 based development boards.
The Pinctrl configuration has already been applied, so the only
missing piece of the DT puzzle is for a board's DTB to enable
the nodes.

Signed-off-by: Ajit Pal Singh <ajitpal.si...@st.com>
Signed-off-by: Lee Jones <lee.jo...@linaro.org>
---
 arch/arm/boot/dts/stih416.dtsi | 44 +++++++++++++++++++++++++++++++++++++++++-
 1 file changed, 43 insertions(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/stih416.dtsi b/arch/arm/boot/dts/stih416.dtsi
index 84758d7..c28ef85 100644
--- a/arch/arm/boot/dts/stih416.dtsi
+++ b/arch/arm/boot/dts/stih416.dtsi
@@ -102,7 +102,7 @@
                        interrupts      = <0 210 0>;
                        pinctrl-names   = "default";
                        pinctrl-0       = <&pinctrl_sbc_serial1>;
-                       clocks          = <&clk_sysin>;
+                       clocks          = <&clk_sysin>;
                };
 
                i2c@fed40000 {
@@ -236,5 +236,47 @@
                        resets  = <&powerdown STIH416_KEYSCAN_POWERDOWN>,
                                  <&softreset STIH416_KEYSCAN_SOFTRESET>;
                };
+
+               /* SAS PWM Module */
+               pwm0: pwm@fed10000 {
+                       compatible      = "st,sti-pwm";
+                       status          = "disabled";
+                       #pwm-cells      = <2>;
+                       reg             = <0xfed10000 0x68>;
+
+                       pinctrl-names   = "default";
+                       pinctrl-0 =     <&pinctrl_pwm0_chan0_default
+                                       &pinctrl_pwm0_chan1_default
+                                       &pinctrl_pwm0_chan2_default
+                                       &pinctrl_pwm0_chan3_default>;
+
+                       clock-names     = "pwm";
+                       clocks          = <&clk_sysin>;
+                       st,pwm-num-chan = <4>;
+               };
+
+               /* SBC PWM Module */
+               pwm1: pwm@fe510000 {
+                       compatible      = "st,sti-pwm";
+                       status          = "disabled";
+                       #pwm-cells      = <2>;
+                       reg             = <0xfe510000 0x68>;
+
+                       pinctrl-names   = "default";
+                       pinctrl-0       = <&pinctrl_pwm1_chan0_default
+                                       /*
+                                        * Shared with SBC_OBS_NOTRST.  Don't
+                                        * enable unless you really know what
+                                        * you're doing.
+                                        *
+                                        * &pinctrl_pwm1_chan1_default
+                                        */
+                                       &pinctrl_pwm1_chan2_default
+                                       &pinctrl_pwm1_chan3_default>;
+
+                       clock-names     = "pwm";
+                       clocks          = <&clk_sysin>;
+                       st,pwm-num-chan = <3>;
+               };
        };
 };
-- 
1.8.3.2

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Reply via email to