On Thu, Jul 17, 2014 at 03:18:31PM +0200, Andreas Werner wrote:
> Added driver to support the 14F021P00 BMC Watchdog.
> The BMC is a Board Management Controller including watchdog functionality.
>
> This driver use the I2C interface to the BMC using the menf21bmc MFD Core
> driver.
>
> Signed-off-by: Andreas Werner <andreas.wer...@men.de>
Only thing I dislike is continuation line alignment, where I really prefer
the 'official' style. That doesn't raise to the level of objection, though.
Reviewed-by: Guenter Roeck <li...@roeck-us.net>
Guenter
> ---
> drivers/watchdog/Kconfig | 7 ++
> drivers/watchdog/Makefile | 1 +
> drivers/watchdog/menf21bmc_wdt.c | 206
> +++++++++++++++++++++++++++++++++++++++
> 3 files changed, 214 insertions(+)
> create mode 100644 drivers/watchdog/menf21bmc_wdt.c
>
> diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
> index 76dd541..f96431d 100644
> --- a/drivers/watchdog/Kconfig
> +++ b/drivers/watchdog/Kconfig
> @@ -95,6 +95,13 @@ config GPIO_WATCHDOG
> If you say yes here you get support for watchdog device
> controlled through GPIO-line.
>
> +config MENF21BMC_WATCHDOG
> + tristate "MEN 14F021P00 BMC Watchdog"
> + depends on MFD_MENF21BMC
> + select WATCHDOG_CORE
> + help
> + Say Y here to include support for the MEN 14F021P00 BMC Watchdog.
> +
> config WM831X_WATCHDOG
> tristate "WM831x watchdog"
> depends on MFD_WM831X
> diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
> index 468c320..de17014 100644
> --- a/drivers/watchdog/Makefile
> +++ b/drivers/watchdog/Makefile
> @@ -178,3 +178,4 @@ obj-$(CONFIG_WM831X_WATCHDOG) += wm831x_wdt.o
> obj-$(CONFIG_WM8350_WATCHDOG) += wm8350_wdt.o
> obj-$(CONFIG_MAX63XX_WATCHDOG) += max63xx_wdt.o
> obj-$(CONFIG_SOFT_WATCHDOG) += softdog.o
> +obj-$(CONFIG_MENF21BMC_WATCHDOG) += menf21bmc_wdt.o
> diff --git a/drivers/watchdog/menf21bmc_wdt.c
> b/drivers/watchdog/menf21bmc_wdt.c
> new file mode 100644
> index 0000000..b46ee92
> --- /dev/null
> +++ b/drivers/watchdog/menf21bmc_wdt.c
> @@ -0,0 +1,206 @@
> +/*
> + * MEN 14F021P00 Board Management Controller (BMC) Watchdog Driver.
> + *
> + * Copyright (C) 2014 MEN Mikro Elektronik Nuernberg GmbH
> + * Author: Andreas Werner <andreas.wer...@men.de>
> + * All rights reserved.
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms of the GNU General Public License as published by the
> + * Free Software Foundation; either version 2 of the License, or (at your
> + * option) any later version.
> + *
> + */
> +
> +#include <linux/kernel.h>
> +#include <linux/device.h>
> +#include <linux/module.h>
> +#include <linux/watchdog.h>
> +#include <linux/platform_device.h>
> +#include <linux/i2c.h>
> +
> +#define DEVNAME "menf21bmc_wdt"
> +
> +#define BMC_CMD_WD_ON 0x11
> +#define BMC_CMD_WD_OFF 0x12
> +#define BMC_CMD_WD_TRIG 0x13
> +#define BMC_CMD_WD_TIME 0x14
> +#define BMC_CMD_WD_STATE 0x17
> +#define BMC_WD_OFF_VAL 0x69
> +#define BMC_CMD_RST_RSN 0x92
> +
> +#define BMC_WD_TIMEOUT_MIN 1 /* in sec */
> +#define BMC_WD_TIMEOUT_MAX 6553 /* in sec */
> +
> +static bool nowayout = WATCHDOG_NOWAYOUT;
> +module_param(nowayout, bool, 0);
> +MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started
> (default="
> + __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
> +
> +struct menf21bmc_wdt {
> + struct watchdog_device wdt;
> + struct i2c_client *i2c_client;
> +};
> +
> +static int menf21bmc_wdt_set_bootstatus(struct menf21bmc_wdt *data)
> +{
> + int rst_rsn;
> +
> + rst_rsn = i2c_smbus_read_byte_data(data->i2c_client, BMC_CMD_RST_RSN);
> + if (rst_rsn < 0)
> + return rst_rsn;
> +
> + if (rst_rsn == 0x02)
> + data->wdt.bootstatus |= WDIOF_CARDRESET;
> + else if (rst_rsn == 0x05)
> + data->wdt.bootstatus |= WDIOF_EXTERN1;
> + else if (rst_rsn == 0x06)
> + data->wdt.bootstatus |= WDIOF_EXTERN2;
> + else if (rst_rsn == 0x0A)
> + data->wdt.bootstatus |= WDIOF_POWERUNDER;
> +
> + return 0;
> +}
> +
> +static int menf21bmc_wdt_start(struct watchdog_device *wdt)
> +{
> + struct menf21bmc_wdt *drv_data = watchdog_get_drvdata(wdt);
> +
> + return i2c_smbus_write_byte(drv_data->i2c_client, BMC_CMD_WD_ON);
> +}
> +
> +static int menf21bmc_wdt_stop(struct watchdog_device *wdt)
> +{
> + struct menf21bmc_wdt *drv_data = watchdog_get_drvdata(wdt);
> +
> + return i2c_smbus_write_byte_data(drv_data->i2c_client,
> + BMC_CMD_WD_OFF, BMC_WD_OFF_VAL);
> +}
> +
> +static int
> +menf21bmc_wdt_settimeout(struct watchdog_device *wdt, unsigned int timeout)
> +{
> + int ret;
> + struct menf21bmc_wdt *drv_data = watchdog_get_drvdata(wdt);
> +
> + /*
> + * BMC Watchdog does have a resolution of 100ms.
> + * Watchdog API defines the timeout in seconds, so we have to
> + * multiply the value.
> + */
> + ret = i2c_smbus_write_word_data(drv_data->i2c_client,
> + BMC_CMD_WD_TIME, timeout * 10);
> + if (ret < 0)
> + return ret;
> +
> + wdt->timeout = timeout;
> +
> + return 0;
> +}
> +
> +static int menf21bmc_wdt_ping(struct watchdog_device *wdt)
> +{
> + struct menf21bmc_wdt *drv_data = watchdog_get_drvdata(wdt);
> +
> + return i2c_smbus_write_byte(drv_data->i2c_client, BMC_CMD_WD_TRIG);
> +}
> +
> +static const struct watchdog_info menf21bmc_wdt_info = {
> + .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING,
> + .identity = DEVNAME,
> +};
> +
> +static const struct watchdog_ops menf21bmc_wdt_ops = {
> + .owner = THIS_MODULE,
> + .start = menf21bmc_wdt_start,
> + .stop = menf21bmc_wdt_stop,
> + .ping = menf21bmc_wdt_ping,
> + .set_timeout = menf21bmc_wdt_settimeout,
> +};
> +
> +static int menf21bmc_wdt_probe(struct platform_device *pdev)
> +{
> + int ret, bmc_timeout;
> + struct menf21bmc_wdt *drv_data;
> + struct i2c_client *i2c_client = to_i2c_client(pdev->dev.parent);
> +
> + drv_data = devm_kzalloc(&pdev->dev,
> + sizeof(struct menf21bmc_wdt), GFP_KERNEL);
> + if (!drv_data)
> + return -ENOMEM;
> +
> + drv_data->wdt.ops = &menf21bmc_wdt_ops;
> + drv_data->wdt.info = &menf21bmc_wdt_info;
> + drv_data->wdt.min_timeout = BMC_WD_TIMEOUT_MIN;
> + drv_data->wdt.max_timeout = BMC_WD_TIMEOUT_MAX;
> + drv_data->i2c_client = i2c_client;
> +
> + /*
> + * Get the current wdt timeout value from the BMC because
> + * the BMC will save the value set before if the system restarts.
> + */
> + bmc_timeout = i2c_smbus_read_word_data(drv_data->i2c_client,
> + BMC_CMD_WD_TIME);
> + if (bmc_timeout < 0) {
> + dev_err(&pdev->dev, "failed to get current WDT timeout\n");
> + return bmc_timeout;
> + }
> +
> + watchdog_init_timeout(&drv_data->wdt, bmc_timeout / 10, &pdev->dev);
> + watchdog_set_nowayout(&drv_data->wdt, nowayout);
> + watchdog_set_drvdata(&drv_data->wdt, drv_data);
> + platform_set_drvdata(pdev, drv_data);
> +
> + ret = menf21bmc_wdt_set_bootstatus(drv_data);
> + if (ret < 0) {
> + dev_err(&pdev->dev, "failed to set Watchdog bootstatus\n");
> + return ret;
> + }
> +
> + ret = watchdog_register_device(&drv_data->wdt);
> + if (ret) {
> + dev_err(&pdev->dev, "failed to register Watchdog device\n");
> + return ret;
> + }
> +
> + dev_info(&pdev->dev, "MEN 14F021P00 BMC Watchdog device enabled\n");
> +
> + return 0;
> +}
> +
> +static int menf21bmc_wdt_remove(struct platform_device *pdev)
> +{
> + struct menf21bmc_wdt *drv_data = platform_get_drvdata(pdev);
> +
> + dev_warn(&pdev->dev,
> + "Unregister MEN 14F021P00 BMC Watchdog device, board may
> reset\n");
> +
> + watchdog_unregister_device(&drv_data->wdt);
> +
> + return 0;
> +}
> +
> +static void menf21bmc_wdt_shutdown(struct platform_device *pdev)
> +{
> + struct menf21bmc_wdt *drv_data = platform_get_drvdata(pdev);
> +
> + i2c_smbus_write_word_data(drv_data->i2c_client,
> + BMC_CMD_WD_OFF, BMC_WD_OFF_VAL);
> +}
> +
> +static struct platform_driver menf21bmc_wdt = {
> + .driver = {
> + .owner = THIS_MODULE,
> + .name = DEVNAME,
> + },
> + .probe = menf21bmc_wdt_probe,
> + .remove = menf21bmc_wdt_remove,
> + .shutdown = menf21bmc_wdt_shutdown,
> +};
> +
> +module_platform_driver(menf21bmc_wdt);
> +
> +MODULE_DESCRIPTION("MEN 14F021P00 BMC Watchdog driver");
> +MODULE_AUTHOR("Andreas Werner <andreas.wer...@men.de>");
> +MODULE_LICENSE("GPL");
> +MODULE_ALIAS("platform:menf21bmc_wdt");
> --
> 2.0.1
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-watchdog" in
> the body of a message to majord...@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
