[PATCH] ARM: zynq: DT: Add CAN node

[Michal Simek]

Add node describing Zynq's CAN controller.

Signed-off-by: Michal Simek <michal.si...@xilinx.com>
---

 arch/arm/boot/dts/zynq-7000.dtsi | 13 ++++++++++++-
 1 file changed, 12 insertions(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/zynq-7000.dtsi b/arch/arm/boot/dts/zynq-7000.dtsi
index 366ca6434f54..2287d9b4ed1a 100644
--- a/arch/arm/boot/dts/zynq-7000.dtsi
+++ b/arch/arm/boot/dts/zynq-7000.dtsi
@@ -71,7 +71,18 @@
                        interrupts = <0 7 4>;
                        interrupt-parent = <&intc>;
                        clocks = <&clkc 12>;
-               };
+               };
+
+               can0: can@e0008000 {
+                       compatible = "xlnx,zynq-can-1.0";
+                       clocks = <&clkc 19>, <&clkc 36>;
+                       clock-names = "can_clk", "pclk";
+                       reg = <0xe0008000 0x1000>;
+                       interrupts = <0 28 4>;
+                       interrupt-parent = <&intc>;
+                       tx-fifo-depth = <0x40>;
+                       rx-fifo-depth = <0x40>;
+               };

                gpio0: gpio@e000a000 {
                        compatible = "xlnx,zynq-gpio-1.0";
--
1.8.2.3

pgp87WKPjS_Do.pgp
Description: PGP signature