On Mon, 14 Mar 2005 21:17:55 -0800 Andrew Morton <[EMAIL PROTECTED]> bubbled:
> Martin Zwickel <[EMAIL PROTECTED]> wrote:
> >
> > Hi,
> >
> > just tried the 2.6.11-mm3 and at boot-time my start scripts try to
> > enable DMA on my disk (hdparm -m16 -c1 -u1 -X69 /dev/hda).
> >
> > But while running hdparm, the kernel waits many seconds and gives me
> > some DMA warnings/errors:
> >
> > ...
> >
> > hda: set_drive_speed_status: status=0xd0 { Busy }
> >
> > ide: failed opcode was: unknown
> > hda: dma_timer_expiry: dma status == 0x41
> > hda: DMA timeout error
> > hda: dma timeout error: status=0xd0 { Busy }
> > ...
> >
> > That happened also with 2.6.11-rc3 since I thought I should switch
> > away from my 2.6.8-rc2-mm1 (the best kernel ever ;)).
>
> Could you please check whether 2.6.11-rc1 does this? It should be
> released mid-week. Thanks.
Hi Andrew,
you mean 2.6.12-rc1, right?
Regards,
Martin
--
MyExcuse:
it has Intel Inside
Martin Zwickel <[EMAIL PROTECTED]>
Research & Development
TechnoTrend AG <http://www.technotrend.de>
pgp8rmvuQpJcc.pgp
Description: PGP signature
