On Sat, Jul 26, 2014 at 04:48:10PM -0700, Benoit Masson wrote:
> The Lenovo Iomega ix4-300d is a 4-Bay sata NAS with dual Gb,
> USB2.0 & 3.0, powered by a Marvell Armada XP MV78230 dual core CPU.
>
> http://shop.lenovo.com/us/en/servers/network-storage/lenovoemc/ix4-300d/
> Signed-off-by: Benoit Masson <ya...@perenite.com>
> ---
> arch/arm/boot/dts/Makefile | 3 +-
> arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts | 285
> ++++++++++++++++++++++++
> 2 files changed, 287 insertions(+), 1 deletion(-)
> create mode 100644 arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts
>
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index adb5ed9..4429495 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -437,8 +437,9 @@ dtb-$(CONFIG_MACH_ARMADA_XP) += \
> armada-xp-axpwifiap.dtb \
> armada-xp-db.dtb \
> armada-xp-gp.dtb \
> - armada-xp-netgear-rn2120.dtb \
> + armada-xp-lenovo-ix4-300d.dtb \
> armada-xp-matrix.dtb \
> + armada-xp-netgear-rn2120.dtb \
> armada-xp-openblocks-ax3-4.dtb
> dtb-$(CONFIG_MACH_DOVE) += dove-cm-a510.dtb \
> dove-cubox.dtb \
> diff --git a/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts
> b/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts
> new file mode 100644
> index 0000000..c82a8e3
> --- /dev/null
> +++ b/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts
> @@ -0,0 +1,285 @@
> +/*
> + * Device Tree file for Lenovo Iomega ix4-300d
> + *
> + * Copyright (C) 2014, Benoit Masson <ya...@perenite.com>
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License
> + * as published by the Free Software Foundation; either version
> + * 2 of the License, or (at your option) any later version.
> + */
> +
> +/dts-v1/;
> +
> +#include <dt-bindings/input/input.h>
> +#include <dt-bindings/gpio/gpio.h>
> +#include "armada-xp-mv78230.dtsi"
> +
> +/ {
> + model = "Lenovo Iomega ix4-300d";
> + compatible = "lenovo,ix4-300d", "marvell,armadaxp-mv78230",
> + "marvell,armadaxp", "marvell,armada-370-xp";
> +
> + chosen {
> + bootargs = "console=ttyS0,115200 earlyprintk";
> + stdout-path = "/soc/internal-regs/serial@12000";
> + };
> +
> + memory {
> + device_type = "memory";
> + reg = <0 0x00000000 0 0x20000000>; /* 512MB */
> + };
> +
> + soc {
> + ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xd0000000 0x100000
> + MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000>;
> +
> + pcie-controller {
> + status = "okay";
> +
> + /* Quad port sata: Marvell 88SX7042 */
> + pcie@1,0 {
> + /* Port 0, Lane 0 */
> + status = "okay";
> + };
> +
> + /* USB 3.0 xHCI controller: NEC D720200F1 */
> + pcie@5,0 {
> + /* Port 1, Lane 0 */
> + status = "okay";
> + };
> + };
> +
> + internal-regs {
> + pinctrl {
> + poweroff_pin: poweroff-pin {
> + marvell,pins = "mpp24";
> + marvell,function = "gpio";
> + };
> +
> + power_button_pin: power-button-pin {
> + marvell,pins = "mpp44";
> + marvell,function = "gpio";
> + };
> +
> + reset_button_pin: reset-button-pin {
> + marvell,pins = "mpp45";
> + marvell,function = "gpio";
> + };
> + select_button_pin: select-button-pin {
> + marvell,pins = "mpp41";
> + marvell,function = "gpio";
> + };
> +
> + scroll_button_pin: scroll-button-pin {
> + marvell,pins = "mpp42";
> + marvell,function = "gpio";
> + };
> +
> + hdd_led_pin: hdd-led-pin {
> + marvell,pins = "mpp26";
> + marvell,function = "gpio";
> + };
> + };
> +
> + serial@12000 {
> + status = "okay";
> + };
> +
> + mdio {
> + phy0: ethernet-phy@0 { /* Marvell 88E1318 */
> + reg = <0>;
> + };
> +
> + phy1: ethernet-phy@1 { /* Marvell 88E1318 */
> + reg = <1>;
> + };
> + };
> +
> + ethernet@70000 {
> + status = "okay";
> + phy = <&phy0>;
> + phy-mode = "rgmii-id";
> + };
> +
> + ethernet@74000 {
> + status = "okay";
> + phy = <&phy1>;
> + phy-mode = "rgmii-id";
> + };
> +
> + usb@50000 {
> + status = "okay";
> + };
> +
> + usb@51000 {
> + status = "okay";
> + };
> +
> + i2c@11000 {
> + compatible = "marvell,mv64xxx-i2c";
O.K, this version is good.
Acked-by: Andrew Lunn <and...@lunn.ch>
Andrew
> + clock-frequency = <400000>;
> + status = "okay";
> +
> + adt7473@2e {
> + compatible = "adi,adt7473";
> + reg = <0x2e>;
> + };
> +
> + pcf8563@51 {
> + compatible = "nxp,pcf8563";
> + reg = <0x51>;
> + };
> +
> + };
> +
> + nand@d0000 {
> + status = "okay";
> + num-cs = <1>;
> + marvell,nand-keep-config;
> + marvell,nand-enable-arbiter;
> + nand-on-flash-bbt;
> +
> + partition@0 {
> + label = "u-boot";
> + reg = <0x0000000 0xe0000>;
> + read-only;
> + };
> +
> + partition@e0000 {
> + label = "u-boot-env";
> + reg = <0xe0000 0x20000>;
> + read-only;
> + };
> +
> + partition@100000 {
> + label = "u-boot-env2";
> + reg = <0x100000 0x20000>;
> + read-only;
> + };
> +
> + partition@120000 {
> + label = "zImage";
> + reg = <0x120000 0x400000>;
> + };
> +
> + partition@520000 {
> + label = "initrd";
> + reg = <0x520000 0x400000>;
> + };
> +
> + partition@xE00000 {
> + label = "boot";
> + reg = <0xE00000 0x3F200000>;
> + };
> +
> + partition@flash {
> + label = "flash";
> + reg = <0x0 0x40000000>;
> + };
> + };
> + };
> + };
> +
> + gpio-keys {
> + compatible = "gpio-keys";
> + pinctrl-0 = <&power_button_pin &reset_button_pin
> + &select_button_pin &scroll_button_pin>;
> + pinctrl-names = "default";
> +
> + power-button {
> + label = "Power Button";
> + linux,code = <KEY_POWER>;
> + gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>;
> + };
> +
> + reset-button {
> + label = "Reset Button";
> + linux,code = <KEY_RESTART>;
> + gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
> + };
> +
> + select-button {
> + label = "Select Button";
> + linux,code = <BTN_SELECT>;
> + gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
> + };
> +
> + scroll-button {
> + label = "Scroll Button";
> + linux,code = <KEY_SCROLLDOWN>;
> + gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
> + };
> + };
> +
> + spi3 {
> + compatible = "spi-gpio";
> + status = "okay";
> + gpio-sck = <&gpio0 25 0>;
> + gpio-mosi = <&gpio1 15 0>; /*gpio 47*/
> + cs-gpios = <&gpio0 27 0 >;
> + num-chipselects = <1>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + gpio2: gpio2@0 {
> + compatible = "fairchild,74hc595";
> + gpio-controller;
> + #gpio-cells = <2>;
> + reg = <0>;
> + registers-number = <2>;
> + spi-max-frequency = <100000>;
> + };
> + };
> +
> + gpio-leds {
> + compatible = "gpio-leds";
> + pinctrl-0 = <&hdd_led_pin>;
> + pinctrl-names = "default";
> +
> + hdd-led {
> + label = "ix4-300d:hdd:blue";
> + gpios = <&gpio0 26 GPIO_ACTIVE_HIGH>;
> + default-state = "off";
> + };
> +
> + power-led {
> + label = "ix4-300d:power:white";
> + gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
> + /* init blinking while booting */
> + linux,default-trigger = "timer";
> + default-state = "on";
> + };
> +
> + sysfail-led {
> + label = "ix4-300d:sysfail:red";
> + gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>;
> + default-state = "off";
> + };
> +
> + sys-led {
> + label = "ix4-300d:sys:blue";
> + gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>;
> + default-state = "off";
> + };
> +
> + hddfail-led {
> + label = "ix4-300d:hddfail:red";
> + gpios = <&gpio2 4 GPIO_ACTIVE_HIGH>;
> + default-state = "off";
> + };
> +
> + };
> +
> + /*
> + * Warning: you need both eth1 & 0 PHY initialized (i.e having
> + * them up does the tweak) for poweroff to shutdown otherwise it
> + * reboots
> + */
> + gpio-poweroff {
> + compatible = "gpio-poweroff";
> + pinctrl-0 = <&poweroff_pin>;
> + pinctrl-names = "default";
> + gpios = <&gpio0 24 GPIO_ACTIVE_HIGH>;
> + };
> +};
> --
> 1.9.1
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
