ARGOFFSET is zero now, removing it changes no code.
A few macros lost "offset" parameter, since it is always zero now too.
Signed-off-by: Denys Vlasenko <dvlas...@redhat.com>
CC: Oleg Nesterov <o...@redhat.com>
CC: "H. Peter Anvin" <h...@zytor.com>
CC: Andy Lutomirski <l...@amacapital.net>
CC: Frederic Weisbecker <fweis...@gmail.com>
CC: X86 ML <x...@kernel.org>
CC: Alexei Starovoitov <a...@plumgrid.com>
CC: Will Drewry <w...@chromium.org>
CC: Kees Cook <keesc...@chromium.org>
CC: linux-kernel@vger.kernel.org
---
arch/x86/ia32/ia32entry.S | 136 ++++++++++++++++++++---------------------
arch/x86/include/asm/calling.h | 2 -
arch/x86/kernel/entry_64.S | 62 +++++++++----------
3 files changed, 99 insertions(+), 101 deletions(-)
diff --git a/arch/x86/ia32/ia32entry.S b/arch/x86/ia32/ia32entry.S
index ef9ee16..4e51c7c 100644
--- a/arch/x86/ia32/ia32entry.S
+++ b/arch/x86/ia32/ia32entry.S
@@ -41,13 +41,13 @@
movl %edx,%edx /* zero extension */
.endm
- /* clobbers %eax */
- .macro CLEAR_RREGS offset=0, _r9=rax
+ /* clobbers %eax */
+ .macro CLEAR_RREGS _r9=rax
xorl %eax,%eax
- movq %rax,\offset+R11(%rsp)
- movq %rax,\offset+R10(%rsp)
- movq %\_r9,\offset+R9(%rsp)
- movq %rax,\offset+R8(%rsp)
+ movq %rax,R11(%rsp)
+ movq %rax,R10(%rsp)
+ movq %\_r9,R9(%rsp)
+ movq %rax,R8(%rsp)
.endm
/*
@@ -60,14 +60,14 @@
* If it's -1 to make us punt the syscall, then (u32)-1 is still
* an appropriately invalid value.
*/
- .macro LOAD_ARGS32 offset, _r9=0
+ .macro LOAD_ARGS32 _r9=0
.if \_r9
- movl \offset+R9(%rsp),%r9d
+ movl R9(%rsp),%r9d
.endif
- movl \offset+RCX(%rsp),%ecx
- movl \offset+RDX(%rsp),%edx
- movl \offset+RSI(%rsp),%esi
- movl \offset+RDI(%rsp),%edi
+ movl RCX(%rsp),%ecx
+ movl RDX(%rsp),%edx
+ movl RSI(%rsp),%esi
+ movl RDI(%rsp),%edi
movl %eax,%eax /* zero extension */
.endm
@@ -152,8 +152,8 @@ ENTRY(ia32_sysenter_target)
1: movl (%rbp),%ebp
_ASM_EXTABLE(1b,ia32_badarg)
ASM_CLAC
- orl $TS_COMPAT,TI_status+THREAD_INFO(%rsp,RIP-ARGOFFSET)
- testl
$_TIF_WORK_SYSCALL_ENTRY,TI_flags+THREAD_INFO(%rsp,RIP-ARGOFFSET)
+ orl $TS_COMPAT,TI_status+THREAD_INFO(%rsp,RIP)
+ testl $_TIF_WORK_SYSCALL_ENTRY,TI_flags+THREAD_INFO(%rsp,RIP)
CFI_REMEMBER_STATE
jnz sysenter_tracesys
cmpq $(IA32_NR_syscalls-1),%rax
@@ -162,13 +162,13 @@ sysenter_do_call:
IA32_ARG_FIXUP
sysenter_dispatch:
call *ia32_sys_call_table(,%rax,8)
- movq %rax,RAX-ARGOFFSET(%rsp)
+ movq %rax,RAX(%rsp)
DISABLE_INTERRUPTS(CLBR_NONE)
TRACE_IRQS_OFF
- testl $_TIF_ALLWORK_MASK,TI_flags+THREAD_INFO(%rsp,RIP-ARGOFFSET)
+ testl $_TIF_ALLWORK_MASK,TI_flags+THREAD_INFO(%rsp,RIP)
jnz sysexit_audit
sysexit_from_sys_call:
- andl $~TS_COMPAT,TI_status+THREAD_INFO(%rsp,RIP-ARGOFFSET)
+ andl $~TS_COMPAT,TI_status+THREAD_INFO(%rsp,RIP)
/* clear IF, that popfq doesn't enable interrupts early */
andl $~0x200,EFLAGS-R11(%rsp)
movl RIP-R11(%rsp),%edx /* User %eip */
@@ -195,18 +195,18 @@ sysexit_from_sys_call:
movl %eax,%esi /* 2nd arg: syscall number */
movl $AUDIT_ARCH_I386,%edi /* 1st arg: audit arch */
call __audit_syscall_entry
- movl RAX-ARGOFFSET(%rsp),%eax /* reload syscall number */
+ movl RAX(%rsp),%eax /* reload syscall number */
cmpq $(IA32_NR_syscalls-1),%rax
ja ia32_badsys
movl %ebx,%edi /* reload 1st syscall arg */
- movl RCX-ARGOFFSET(%rsp),%esi /* reload 2nd syscall arg */
- movl RDX-ARGOFFSET(%rsp),%edx /* reload 3rd syscall arg */
- movl RSI-ARGOFFSET(%rsp),%ecx /* reload 4th syscall arg */
- movl RDI-ARGOFFSET(%rsp),%r8d /* reload 5th syscall arg */
+ movl RCX(%rsp),%esi /* reload 2nd syscall arg */
+ movl RDX(%rsp),%edx /* reload 3rd syscall arg */
+ movl RSI(%rsp),%ecx /* reload 4th syscall arg */
+ movl RDI(%rsp),%r8d /* reload 5th syscall arg */
.endm
.macro auditsys_exit exit
- testl $(_TIF_ALLWORK_MASK &
~_TIF_SYSCALL_AUDIT),TI_flags+THREAD_INFO(%rsp,RIP-ARGOFFSET)
+ testl $(_TIF_ALLWORK_MASK &
~_TIF_SYSCALL_AUDIT),TI_flags+THREAD_INFO(%rsp,RIP)
jnz ia32_ret_from_sys_call
TRACE_IRQS_ON
ENABLE_INTERRUPTS(CLBR_NONE)
@@ -217,13 +217,13 @@ sysexit_from_sys_call:
1: setbe %al /* 1 if error, 0 if not */
movzbl %al,%edi /* zero-extend that into %edi */
call __audit_syscall_exit
- movq RAX-ARGOFFSET(%rsp),%rax /* reload syscall return value */
+ movq RAX(%rsp),%rax /* reload syscall return value */
movl $(_TIF_ALLWORK_MASK & ~_TIF_SYSCALL_AUDIT),%edi
DISABLE_INTERRUPTS(CLBR_NONE)
TRACE_IRQS_OFF
- testl %edi,TI_flags+THREAD_INFO(%rsp,RIP-ARGOFFSET)
+ testl %edi,TI_flags+THREAD_INFO(%rsp,RIP)
jz \exit
- CLEAR_RREGS -ARGOFFSET
+ CLEAR_RREGS
jmp int_with_check
.endm
@@ -239,7 +239,7 @@ sysexit_audit:
sysenter_tracesys:
#ifdef CONFIG_AUDITSYSCALL
- testl $(_TIF_WORK_SYSCALL_ENTRY &
~_TIF_SYSCALL_AUDIT),TI_flags+THREAD_INFO(%rsp,RIP-ARGOFFSET)
+ testl $(_TIF_WORK_SYSCALL_ENTRY &
~_TIF_SYSCALL_AUDIT),TI_flags+THREAD_INFO(%rsp,RIP)
jz sysenter_auditsys
#endif
SAVE_EXTRA_REGS
@@ -247,7 +247,7 @@ sysenter_tracesys:
movq $-ENOSYS,RAX(%rsp)/* ptrace can change this for a bad syscall */
movq %rsp,%rdi /* &pt_regs -> arg1 */
call syscall_trace_enter
- LOAD_ARGS32 ARGOFFSET /* reload args from stack in case ptrace changed
it */
+ LOAD_ARGS32 /* reload args from stack in case ptrace changed it */
RESTORE_EXTRA_REGS
cmpq $(IA32_NR_syscalls-1),%rax
ja int_ret_from_sys_call /* sysenter_tracesys has set RAX(%rsp) */
@@ -293,17 +293,17 @@ ENTRY(ia32_cstar_target)
ALLOC_PTREGS_ON_STACK 8
SAVE_C_REGS_EXCEPT_RCX_R891011
movl %eax,%eax /* zero extension */
- movq %rax,ORIG_RAX-ARGOFFSET(%rsp)
- movq %rcx,RIP-ARGOFFSET(%rsp)
- CFI_REL_OFFSET rip,RIP-ARGOFFSET
- movq %rbp,RCX-ARGOFFSET(%rsp) /* this lies slightly to ptrace */
+ movq %rax,ORIG_RAX(%rsp)
+ movq %rcx,RIP(%rsp)
+ CFI_REL_OFFSET rip,RIP
+ movq %rbp,RCX(%rsp) /* this lies slightly to ptrace */
movl %ebp,%ecx
- movq $__USER32_CS,CS-ARGOFFSET(%rsp)
- movq $__USER32_DS,SS-ARGOFFSET(%rsp)
- movq %r11,EFLAGS-ARGOFFSET(%rsp)
- /*CFI_REL_OFFSET rflags,EFLAGS-ARGOFFSET*/
- movq %r8,RSP-ARGOFFSET(%rsp)
- CFI_REL_OFFSET rsp,RSP-ARGOFFSET
+ movq $__USER32_CS,CS(%rsp)
+ movq $__USER32_DS,SS(%rsp)
+ movq %r11,EFLAGS(%rsp)
+ /*CFI_REL_OFFSET rflags,EFLAGS*/
+ movq %r8,RSP(%rsp)
+ CFI_REL_OFFSET rsp,RSP
/* no need to do an access_ok check here because r8 has been
32bit zero extended */
/* hardware stack frame is complete now */
@@ -311,8 +311,8 @@ ENTRY(ia32_cstar_target)
1: movl (%r8),%r9d
_ASM_EXTABLE(1b,ia32_badarg)
ASM_CLAC
- orl $TS_COMPAT,TI_status+THREAD_INFO(%rsp,RIP-ARGOFFSET)
- testl
$_TIF_WORK_SYSCALL_ENTRY,TI_flags+THREAD_INFO(%rsp,RIP-ARGOFFSET)
+ orl $TS_COMPAT,TI_status+THREAD_INFO(%rsp,RIP)
+ testl $_TIF_WORK_SYSCALL_ENTRY,TI_flags+THREAD_INFO(%rsp,RIP)
CFI_REMEMBER_STATE
jnz cstar_tracesys
cmpq $IA32_NR_syscalls-1,%rax
@@ -321,32 +321,32 @@ cstar_do_call:
IA32_ARG_FIXUP 1
cstar_dispatch:
call *ia32_sys_call_table(,%rax,8)
- movq %rax,RAX-ARGOFFSET(%rsp)
+ movq %rax,RAX(%rsp)
DISABLE_INTERRUPTS(CLBR_NONE)
TRACE_IRQS_OFF
- testl $_TIF_ALLWORK_MASK,TI_flags+THREAD_INFO(%rsp,RIP-ARGOFFSET)
+ testl $_TIF_ALLWORK_MASK,TI_flags+THREAD_INFO(%rsp,RIP)
jnz sysretl_audit
sysretl_from_sys_call:
- andl $~TS_COMPAT,TI_status+THREAD_INFO(%rsp,RIP-ARGOFFSET)
+ andl $~TS_COMPAT,TI_status+THREAD_INFO(%rsp,RIP)
RESTORE_RSI_RDI_RDX
- movl RIP-ARGOFFSET(%rsp),%ecx
+ movl RIP(%rsp),%ecx
CFI_REGISTER rip,rcx
- movl EFLAGS-ARGOFFSET(%rsp),%r11d
+ movl EFLAGS(%rsp),%r11d
/*CFI_REGISTER rflags,r11*/
xorq %r10,%r10
xorq %r9,%r9
xorq %r8,%r8
TRACE_IRQS_ON
- movl RSP-ARGOFFSET(%rsp),%esp
+ movl RSP(%rsp),%esp
CFI_RESTORE rsp
USERGS_SYSRET32
#ifdef CONFIG_AUDITSYSCALL
cstar_auditsys:
CFI_RESTORE_STATE
- movl %r9d,R9-ARGOFFSET(%rsp) /* register to be clobbered by call */
+ movl %r9d,R9(%rsp) /* register to be clobbered by call */
auditsys_entry_common
- movl R9-ARGOFFSET(%rsp),%r9d /* reload 6th syscall arg */
+ movl R9(%rsp),%r9d /* reload 6th syscall arg */
jmp cstar_dispatch
sysretl_audit:
@@ -355,16 +355,16 @@ sysretl_audit:
cstar_tracesys:
#ifdef CONFIG_AUDITSYSCALL
- testl $(_TIF_WORK_SYSCALL_ENTRY &
~_TIF_SYSCALL_AUDIT),TI_flags+THREAD_INFO(%rsp,RIP-ARGOFFSET)
+ testl $(_TIF_WORK_SYSCALL_ENTRY &
~_TIF_SYSCALL_AUDIT),TI_flags+THREAD_INFO(%rsp,RIP)
jz cstar_auditsys
#endif
xchgl %r9d,%ebp
SAVE_EXTRA_REGS
- CLEAR_RREGS 0, r9
+ CLEAR_RREGS r9
movq $-ENOSYS,RAX(%rsp) /* ptrace can change this for a bad syscall */
movq %rsp,%rdi /* &pt_regs -> arg1 */
call syscall_trace_enter
- LOAD_ARGS32 ARGOFFSET, 1 /* reload args from stack in case ptrace
changed it */
+ LOAD_ARGS32 1 /* reload args from stack in case ptrace changed it */
RESTORE_EXTRA_REGS
xchgl %ebp,%r9d
cmpq $(IA32_NR_syscalls-1),%rax
@@ -422,8 +422,8 @@ ENTRY(ia32_syscall)
this could be a problem. */
ALLOC_PTREGS_ON_STACK
SAVE_C_REGS_EXCEPT_R891011
- orl $TS_COMPAT,TI_status+THREAD_INFO(%rsp,RIP-ARGOFFSET)
- testl $_TIF_WORK_SYSCALL_ENTRY,TI_flags+THREAD_INFO(%rsp,RIP-ARGOFFSET)
+ orl $TS_COMPAT,TI_status+THREAD_INFO(%rsp,RIP)
+ testl $_TIF_WORK_SYSCALL_ENTRY,TI_flags+THREAD_INFO(%rsp,RIP)
jnz ia32_tracesys
cmpq $(IA32_NR_syscalls-1),%rax
ja ia32_badsys
@@ -431,9 +431,9 @@ ia32_do_call:
IA32_ARG_FIXUP
call *ia32_sys_call_table(,%rax,8) # xxx: rip relative
ia32_sysret:
- movq %rax,RAX-ARGOFFSET(%rsp)
+ movq %rax,RAX(%rsp)
ia32_ret_from_sys_call:
- CLEAR_RREGS -ARGOFFSET
+ CLEAR_RREGS
jmp int_ret_from_sys_call
ia32_tracesys:
@@ -442,7 +442,7 @@ ia32_tracesys:
movq $-ENOSYS,RAX(%rsp) /* ptrace can change this for a bad syscall */
movq %rsp,%rdi /* &pt_regs -> arg1 */
call syscall_trace_enter
- LOAD_ARGS32 ARGOFFSET /* reload args from stack in case ptrace changed
it */
+ LOAD_ARGS32 /* reload args from stack in case ptrace changed it */
RESTORE_EXTRA_REGS
cmpq $(IA32_NR_syscalls-1),%rax
ja int_ret_from_sys_call /* ia32_tracesys has set RAX(%rsp) */
@@ -450,7 +450,7 @@ ia32_tracesys:
END(ia32_syscall)
ia32_badsys:
- movq $0,ORIG_RAX-ARGOFFSET(%rsp)
+ movq $0,ORIG_RAX(%rsp)
movq $-ENOSYS,%rax
jmp ia32_sysret
@@ -482,17 +482,17 @@ ia32_ptregs_common:
CFI_ENDPROC
CFI_STARTPROC32 simple
CFI_SIGNAL_FRAME
- CFI_DEF_CFA rsp,SS+8-ARGOFFSET
- CFI_REL_OFFSET rax,RAX-ARGOFFSET
- CFI_REL_OFFSET rcx,RCX-ARGOFFSET
- CFI_REL_OFFSET rdx,RDX-ARGOFFSET
- CFI_REL_OFFSET rsi,RSI-ARGOFFSET
- CFI_REL_OFFSET rdi,RDI-ARGOFFSET
- CFI_REL_OFFSET rip,RIP-ARGOFFSET
-/* CFI_REL_OFFSET cs,CS-ARGOFFSET*/
-/* CFI_REL_OFFSET rflags,EFLAGS-ARGOFFSET*/
- CFI_REL_OFFSET rsp,RSP-ARGOFFSET
-/* CFI_REL_OFFSET ss,SS-ARGOFFSET*/
+ CFI_DEF_CFA rsp,SS+8
+ CFI_REL_OFFSET rax,RAX
+ CFI_REL_OFFSET rcx,RCX
+ CFI_REL_OFFSET rdx,RDX
+ CFI_REL_OFFSET rsi,RSI
+ CFI_REL_OFFSET rdi,RDI
+ CFI_REL_OFFSET rip,RIP
+/* CFI_REL_OFFSET cs,CS*/
+/* CFI_REL_OFFSET rflags,EFLAGS*/
+ CFI_REL_OFFSET rsp,RSP
+/* CFI_REL_OFFSET ss,SS*/
SAVE_EXTRA_REGS 8
call *%rax
RESTORE_EXTRA_REGS 8
diff --git a/arch/x86/include/asm/calling.h b/arch/x86/include/asm/calling.h
index 10aff1e..31d0ac8 100644
--- a/arch/x86/include/asm/calling.h
+++ b/arch/x86/include/asm/calling.h
@@ -88,8 +88,6 @@ For 32-bit we have the following conventions - kernel is
built with
#define RSP 19*8
#define SS 20*8
-#define ARGOFFSET 0
-
.macro ALLOC_PTREGS_ON_STACK addskip=0
subq $15*8+\addskip, %rsp
CFI_ADJUST_CFA_OFFSET 15*8+\addskip
diff --git a/arch/x86/kernel/entry_64.S b/arch/x86/kernel/entry_64.S
index b3c3ebb..ec68a07 100644
--- a/arch/x86/kernel/entry_64.S
+++ b/arch/x86/kernel/entry_64.S
@@ -76,7 +76,7 @@ ENDPROC(native_usergs_sysret64)
#endif /* CONFIG_PARAVIRT */
-.macro TRACE_IRQS_IRETQ offset=ARGOFFSET
+.macro TRACE_IRQS_IRETQ offset=0
#ifdef CONFIG_TRACE_IRQFLAGS
bt $9,EFLAGS-\offset(%rsp) /* interrupts off? */
jnc 1f
@@ -110,7 +110,7 @@ ENDPROC(native_usergs_sysret64)
call debug_stack_reset
.endm
-.macro TRACE_IRQS_IRETQ_DEBUG offset=ARGOFFSET
+.macro TRACE_IRQS_IRETQ_DEBUG offset=0
bt $9,EFLAGS-\offset(%rsp) /* interrupts off? */
jnc 1f
TRACE_IRQS_ON_DEBUG
@@ -187,16 +187,16 @@ ENDPROC(native_usergs_sysret64)
* frame that enables calling into C.
*/
.macro PARTIAL_FRAME start=1 offset=0
- XCPT_FRAME \start, ORIG_RAX+\offset-ARGOFFSET
- CFI_REL_OFFSET rdi, RDI+\offset-ARGOFFSET
- CFI_REL_OFFSET rsi, RSI+\offset-ARGOFFSET
- CFI_REL_OFFSET rdx, RDX+\offset-ARGOFFSET
- CFI_REL_OFFSET rcx, RCX+\offset-ARGOFFSET
- CFI_REL_OFFSET rax, RAX+\offset-ARGOFFSET
- CFI_REL_OFFSET r8, R8+\offset-ARGOFFSET
- CFI_REL_OFFSET r9, R9+\offset-ARGOFFSET
- CFI_REL_OFFSET r10, R10+\offset-ARGOFFSET
- CFI_REL_OFFSET r11, R11+\offset-ARGOFFSET
+ XCPT_FRAME \start, ORIG_RAX+\offset
+ CFI_REL_OFFSET rdi, RDI+\offset
+ CFI_REL_OFFSET rsi, RSI+\offset
+ CFI_REL_OFFSET rdx, RDX+\offset
+ CFI_REL_OFFSET rcx, RCX+\offset
+ CFI_REL_OFFSET rax, RAX+\offset
+ CFI_REL_OFFSET r8, R8+\offset
+ CFI_REL_OFFSET r9, R9+\offset
+ CFI_REL_OFFSET r10, R10+\offset
+ CFI_REL_OFFSET r11, R11+\offset
.endm
/*
@@ -260,13 +260,13 @@ ENTRY(ret_from_fork)
RESTORE_EXTRA_REGS
- testl $3, CS-ARGOFFSET(%rsp) # from kernel_thread?
+ testl $3, CS(%rsp) # from kernel_thread?
jz 1f
testl $_TIF_IA32, TI_flags(%rcx) # 32-bit compat task needs IRET
jnz int_ret_from_sys_call
- RESTORE_TOP_OF_STACK %rdi, -ARGOFFSET
+ RESTORE_TOP_OF_STACK %rdi
jmp ret_from_sys_call # go to the SYSRET fastpath
1:
@@ -333,10 +333,10 @@ GLOBAL(system_call_after_swapgs)
ENABLE_INTERRUPTS(CLBR_NONE)
ALLOC_PTREGS_ON_STACK 8
SAVE_C_REGS
- movq %rax,ORIG_RAX-ARGOFFSET(%rsp)
- movq %rcx,RIP-ARGOFFSET(%rsp)
- CFI_REL_OFFSET rip,RIP-ARGOFFSET
- testl $_TIF_WORK_SYSCALL_ENTRY,TI_flags+THREAD_INFO(%rsp,RIP-ARGOFFSET)
+ movq %rax,ORIG_RAX(%rsp)
+ movq %rcx,RIP(%rsp)
+ CFI_REL_OFFSET rip,RIP
+ testl $_TIF_WORK_SYSCALL_ENTRY,TI_flags+THREAD_INFO(%rsp,RIP)
jnz tracesys
system_call_fastpath:
#if __SYSCALL_MASK == ~0
@@ -348,7 +348,7 @@ system_call_fastpath:
ja badsys
movq %r10,%rcx
call *sys_call_table(,%rax,8) # XXX: rip relative
- movq %rax,RAX-ARGOFFSET(%rsp)
+ movq %rax,RAX(%rsp)
/*
* Syscall return path ending with SYSRET (fast path)
* Has incomplete stack frame and undefined top of stack.
@@ -360,7 +360,7 @@ sysret_check:
LOCKDEP_SYS_EXIT
DISABLE_INTERRUPTS(CLBR_NONE)
TRACE_IRQS_OFF
- movl TI_flags+THREAD_INFO(%rsp,RIP-ARGOFFSET),%edx
+ movl TI_flags+THREAD_INFO(%rsp,RIP),%edx
andl %edi,%edx
jnz sysret_careful
CFI_REMEMBER_STATE
@@ -369,7 +369,7 @@ sysret_check:
*/
TRACE_IRQS_ON
RESTORE_C_REGS_EXCEPT_RCX
- movq RIP-ARGOFFSET(%rsp),%rcx
+ movq RIP(%rsp),%rcx
CFI_REGISTER rip,rcx
/*CFI_REGISTER rflags,r11*/
movq PER_CPU_VAR(old_rsp), %rsp
@@ -401,11 +401,11 @@ sysret_signal:
* These all wind up with the iret return path anyway,
* so just join that path right now.
*/
- FIXUP_TOP_OF_STACK %r11, -ARGOFFSET
+ FIXUP_TOP_OF_STACK %r11
jmp int_check_syscall_exit_work
badsys:
- movq $-ENOSYS,RAX-ARGOFFSET(%rsp)
+ movq $-ENOSYS,RAX(%rsp)
jmp ret_from_sys_call
#ifdef CONFIG_AUDITSYSCALL
@@ -431,7 +431,7 @@ auditsys:
* masked off.
*/
sysret_audit:
- movq RAX-ARGOFFSET(%rsp),%rsi /* second arg, syscall return value */
+ movq RAX(%rsp),%rsi /* second arg, syscall return value */
cmpq $-MAX_ERRNO,%rsi /* is it < -MAX_ERRNO? */
setbe %al /* 1 if so, 0 if not */
movzbl %al,%edi /* zero-extend that into %edi */
@@ -443,7 +443,7 @@ sysret_audit:
/* Do syscall tracing */
tracesys:
#ifdef CONFIG_AUDITSYSCALL
- testl $(_TIF_WORK_SYSCALL_ENTRY &
~_TIF_SYSCALL_AUDIT),TI_flags+THREAD_INFO(%rsp,RIP-ARGOFFSET)
+ testl $(_TIF_WORK_SYSCALL_ENTRY &
~_TIF_SYSCALL_AUDIT),TI_flags+THREAD_INFO(%rsp,RIP)
jz auditsys
#endif
SAVE_EXTRA_REGS
@@ -467,7 +467,7 @@ tracesys:
ja int_ret_from_sys_call /* RAX(%rsp) set to -ENOSYS above */
movq %r10,%rcx /* fixup for C */
call *sys_call_table(,%rax,8)
- movq %rax,RAX-ARGOFFSET(%rsp)
+ movq %rax,RAX(%rsp)
/* Use IRET because user could have changed frame */
/*
@@ -551,9 +551,9 @@ END(stub_\func)
ENTRY(\label)
CFI_STARTPROC
DEFAULT_FRAME 0, 8 /* offset 8: return address */
- FIXUP_TOP_OF_STACK %r11, 8-ARGOFFSET
+ FIXUP_TOP_OF_STACK %r11, 8
call \func
- RESTORE_TOP_OF_STACK %r11, 8-ARGOFFSET
+ RESTORE_TOP_OF_STACK %r11, 8
ret
CFI_ENDPROC
END(\label)
@@ -711,7 +711,7 @@ common_interrupt:
ASM_CLAC
addq $-0x80,(%rsp) /* Adjust vector to [-256,-1] range */
interrupt do_IRQ
- /* 0(%rsp): old_rsp-ARGOFFSET */
+ /* 0(%rsp): old_rsp */
ret_from_intr:
DISABLE_INTERRUPTS(CLBR_NONE)
TRACE_IRQS_OFF
@@ -725,7 +725,7 @@ ret_from_intr:
exit_intr:
GET_THREAD_INFO(%rcx)
- testl $3,CS-ARGOFFSET(%rsp)
+ testl $3,CS(%rsp)
je retint_kernel
/* Interrupt came from user space */
@@ -863,7 +863,7 @@ retint_signal:
ENTRY(retint_kernel)
cmpl $0,PER_CPU_VAR(__preempt_count)
jnz retint_restore_args
- bt $9,EFLAGS-ARGOFFSET(%rsp) /* interrupts off? */
+ bt $9,EFLAGS(%rsp) /* interrupts off? */
jnc retint_restore_args
call preempt_schedule_irq
jmp exit_intr
--
1.8.1.4
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
