Am Montag, 4. August 2014, 12:55:59 schrieb mark yao:
> Signed-off-by: mark yao <y...@rock-chips.com>
> ---
>  .../devicetree/bindings/video/rockchip-panel.txt   |   34
> ++++++++++++++++++++ 1 file changed, 34 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/video/rockchip-panel.txt
> b/Documentation/devicetree/bindings/video/rockchip-panel.txt index
> f599806..f6d80f6 100644
> --- a/Documentation/devicetree/bindings/video/rockchip-panel.txt
> +++ b/Documentation/devicetree/bindings/video/rockchip-panel.txt
> @@ -80,3 +80,37 @@ Example:
>               rockchip,data-width = <24>;
>               rockchip,panel = <&panel>;
>       };
> +
> +Rockchip RK3288 EDP interface
> +================================
> +Required properties:
> +-compatible: "rockchip,rk3288-edp";
> +
> +- reg: physical base address of the controller and length
> +- clocks: from common clock binding: handle to dp clock.
> +     of memory mapped region.
> +- clock-names: from common clock binding:
> +     Required elements: "clk_edp"
> +                     "clk_edp_24m"
> +                     "clk_edp_24m_parent"
> +                     "pclk_edp"
> +- rockchip,grf: this soc should set GRF regs, so need get grf here.
> +- resets: Must contain an entry for each entry in reset-names.
> +     See ../reset/reset.txt for details.
> +- reset-names: Must include the following entries:
> +  - edp
> +- rockchip,panel: required a panel node
> +
> +Example:
> +     edp: edp@ff970000 {
> +             compatible = "rockchip,rk3288-edp";
> +                reg = <0xff970000 0x4000>;
> +                interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
> +                clocks = <&cru SCLK_EDP>, <&cru SCLK_EDP_24M>, <&cru
> PCLK_EDP_CTRL>, <&xin24m>; +                clock-names = "clk_edp",
> "clk_edp_24m", "pclk_edp", "clk_edp_24m_parent"; +

clk_epd_24m_parent is not part of the hardware, so instead of referencing the 
target-parent as part of the device clocks, the new
        "clk: Support for clock parents and rates assigned from device tree"
should be used for setting the target parent - so the re-parenting code should 
also move out of the driver.

This commit [0] is part of the clk-pull request and thus will most likely be 
part of 3.17.


Heiko

[0] 
http://git.linaro.org/people/mike.turquette/linux.git/commitdiff/86be408bfbd846fab3c4ac21d6f9298bd2e4b790?hp=09575693a2511b5ddae0105546e0d9cefc936e34



> +                rockchip,grf = <&grf>;
> +                resets = <&cru 111>;
> +                reset-names = "edp";
> +             rockchip,panel = <&panel>;
> +     };

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Reply via email to