Ok, thanks.
-----Original Message-----
From: Shawn Guo [mailto:shawn....@freescale.com]
Sent: Thursday, August 07, 2014 11:12 AM
To: Wang Shengjiu-B02247
Cc: ker...@pengutronix.de; li...@arm.linux.org.uk; robh...@kernel.org;
pawel.m...@arm.com; mark.rutl...@arm.com; ijc+devicet...@hellion.org.uk;
ga...@codeaurora.org; Chen Guangyu-B42378;
linux-arm-ker...@lists.infradead.org; linux-kernel@vger.kernel.org
Subject: Re: [PATCH V2 3/3] ARM: imx6q: Add the clock route from external OSC
to ESAI clock
On Wed, Aug 06, 2014 at 04:35:15PM +0800, Shengjiu Wang wrote:
> This patch mainly adds the clock route from external 24.576MHz OSC to
> internal ESAI clock via analog clock2 PADs on the SoC and pll4 so that
> ESAI can get an entirely synchronous clock source against CS42888.
>
> [ 1, We found if using pll4 to generate a 24.576MHz from inernal 24.0MHz OSC,
> we would get noise during the audio playback via ESAI->CS42888 even though
> this generated clock's rate is equal to the external one statistically. It
> might be resulted from the tiny difference between two clock source, which
> might be crucial to the sensitive CODEC we use -- CS42888.
>
> 2, Ideally, we should use bypass mode for pll4 since we only need to get
> the raw rate (24.576MHz) while currently bypass mode in clk-pllv3.c isn't
> supported. After bypass mode implement, then we can refine this
> patch.]
I meant we should implement bypass mode first. I will give it a try.
Shawn
>
> Expected result:
>
> anaclk2 0 1 24576000
> lvds2_in 0 1 24576000
> pll4_sel 0 1 24576000
> pll4_audio 0 1 786432000
> pll4_post_div 0 1 786432000
> pll4_audio_div 0 1 786432000
> esai_sel 0 1 786432000
> esai_pred 0 1 98304000
> esai_podf 0 1 24576000
> esai_extal 0 1 24576000
>
> Signed-off-by: Nicolin Chen <guangyu.c...@freescale.com>
> Signed-off-by: Shengjiu Wang <shengjiu.w...@freescale.com>
> ---
> arch/arm/mach-imx/clk-imx6q.c | 5 +++++
> arch/arm/mach-imx/mach-imx6q.c | 28 ++++++++++++++++++++++++++++
> 2 files changed, 33 insertions(+)
>
> diff --git a/arch/arm/mach-imx/clk-imx6q.c
> b/arch/arm/mach-imx/clk-imx6q.c index 330aad3..29151cb 100644
> --- a/arch/arm/mach-imx/clk-imx6q.c
> +++ b/arch/arm/mach-imx/clk-imx6q.c
> @@ -414,6 +414,10 @@ static void __init imx6q_clocks_init(struct device_node
> *ccm_node)
> of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data);
>
> clk_register_clkdev(clk[IMX6QDL_CLK_ENET_REF], "enet_ref", NULL);
> + clk_register_clkdev(clk[IMX6QDL_CLK_PLL4_AUDIO_DIV], "pll4_audio_div",
> NULL);
> + clk_register_clkdev(clk[IMX6QDL_CLK_PLL4_SEL], "pll4_sel", NULL);
> + clk_register_clkdev(clk[IMX6QDL_CLK_LVDS2_IN], "lvds2_in", NULL);
> + clk_register_clkdev(clk[IMX6QDL_CLK_ESAI_EXTAL], "esai_extal",
> +NULL);
>
> if ((imx_get_soc_revision() != IMX_CHIP_REVISION_1_0) ||
> cpu_is_imx6dl()) {
> @@ -457,6 +461,7 @@ static void __init imx6q_clocks_init(struct
> device_node *ccm_node)
>
> /* Audio-related clocks configuration */
> clk_set_parent(clk[IMX6QDL_CLK_SPDIF_SEL],
> clk[IMX6QDL_CLK_PLL3_PFD3_454M]);
> + clk_set_parent(clk[IMX6QDL_CLK_ESAI_SEL],
> +clk[IMX6QDL_CLK_PLL4_AUDIO_DIV]);
>
> /* All existing boards with PCIe use LVDS1 */
> if (IS_ENABLED(CONFIG_PCI_IMX6))
> diff --git a/arch/arm/mach-imx/mach-imx6q.c
> b/arch/arm/mach-imx/mach-imx6q.c index d51c6e9..ea24a96 100644
> --- a/arch/arm/mach-imx/mach-imx6q.c
> +++ b/arch/arm/mach-imx/mach-imx6q.c
> @@ -362,6 +362,28 @@ put_node:
> of_node_put(np);
> }
>
> +#define ESAI_AUDIO_MCLK 24576000
> +
> +static void __init imx6q_audio_lvds2_init(void) {
> + struct clk *pll4_sel, *lvds2_in, *pll4_audio_div,
> +*esai_extal;
> +
> + pll4_audio_div = clk_get_sys(NULL, "pll4_audio_div");
> + pll4_sel = clk_get_sys(NULL, "pll4_sel");
> + lvds2_in = clk_get_sys(NULL, "lvds2_in");
> + esai_extal = clk_get_sys(NULL, "esai_extal");
> + if (IS_ERR(pll4_audio_div) || IS_ERR(pll4_sel) ||
> + IS_ERR(lvds2_in) || IS_ERR(esai_extal))
> + return;
> +
> + if (clk_get_rate(lvds2_in) != ESAI_AUDIO_MCLK)
> + return;
> +
> + clk_set_parent(pll4_sel, lvds2_in);
> + clk_set_rate(pll4_audio_div, 786432000);
> + clk_set_rate(esai_extal, ESAI_AUDIO_MCLK); }
> +
> static struct platform_device imx6q_cpufreq_pdev = {
> .name = "imx6q-cpufreq",
> };
> @@ -379,6 +401,12 @@ static void __init imx6q_init_late(void)
> imx6q_opp_init();
> platform_device_register(&imx6q_cpufreq_pdev);
> }
> +
> + if (of_machine_is_compatible("fsl,imx6q-sabreauto")
> + || of_machine_is_compatible("fsl,imx6dl-sabreauto")) {
> + imx6q_audio_lvds2_init();
> + }
> +
> }
>
> static void __init imx6q_map_io(void)
> --
> 1.7.9.5
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
