On Thu, Aug 14, 2014 at 12:20 AM, Kiran Padwal
<kiran.pad...@smartplayin.com> wrote:
> diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi
> b/arch/arm/boot/dts/qcom-apq8064.dtsi
> index 92bf793..fbebf5c 100644
> --- a/arch/arm/boot/dts/qcom-apq8064.dtsi
> +++ b/arch/arm/boot/dts/qcom-apq8064.dtsi
> @@ -70,6 +70,17 @@
> ranges;
> compatible = "simple-bus";
>
> + qcom_pinmux: pinmux@800000 {
There are (at least) three different pinmuxes in these platforms: TLMM, PMIC
GPIO, PMIC MPP. Also this is the phandle that is used to reference the gpio
chip throughout the board.
So I would like to suggest that we name it "tlmm" or like in the downstream
kernel "msmgpio".
> + compatible = "qcom,apq8064-pinctrl";
> + reg = <0x800000 0x4000>;
> +
> + gpio-controller;
> + #gpio-cells = <2>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + interrupts = <0 32 0x4>;
I must have gotten this wrong in the dt binding example, sorry about that.
interrupts should be <0 16 0x4>.
> + };
Regards,
Bjorn
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
