To support HS200 and UHS-1, we need add a big hunk of code,
as shown in the following patches. So a separate file for
rockchip SOCs is suitable.

Signed-off-by: Addy Ke <addy...@rock-chips.com>
---
Changes in v2:
- Kconfig: depend on ARCH_ROCKCHIP, suggested by Bartlomiej Zolnierkiewicz
- Kconfig: depend on OF, suggested by Doug Anderson
- Not change suspend/resume code, suggested by Doug Anderson
- If pdev->dev.of_node is NULL, then return -ENODEV, suggested by Heiko Stübner

 drivers/mmc/host/Kconfig           |   9 +++
 drivers/mmc/host/Makefile          |   1 +
 drivers/mmc/host/dw_mmc-pltfm.c    |  57 ----------------
 drivers/mmc/host/dw_mmc-rockchip.c | 136 +++++++++++++++++++++++++++++++++++++
 4 files changed, 146 insertions(+), 57 deletions(-)
 create mode 100644 drivers/mmc/host/dw_mmc-rockchip.c

diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
index a565254..f6095f6 100644
--- a/drivers/mmc/host/Kconfig
+++ b/drivers/mmc/host/Kconfig
@@ -621,6 +621,15 @@ config MMC_DW_PCI
 
          If unsure, say N.
 
+config MMC_DW_ROCKCHIP
+       tristate "Rockchip specific extensions for Synopsys DW Memory Card 
Interface"
+       depends on MMC_DW && ARCH_ROCKCHIP && OF
+       select MMC_DW_PLTFM
+       help
+         This selects support for Rockchip SoC specific extensions to the
+         Synopsys DesignWare Memory Card Interface driver. Select this option
+         for platforms based on RK3066, RK3188 and RK3288 SoC's.
+
 config MMC_SH_MMCIF
        tristate "SuperH Internal MMCIF support"
        depends on MMC_BLOCK
diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile
index 7f81ddf..5fce465 100644
--- a/drivers/mmc/host/Makefile
+++ b/drivers/mmc/host/Makefile
@@ -45,6 +45,7 @@ obj-$(CONFIG_MMC_DW_PLTFM)    += dw_mmc-pltfm.o
 obj-$(CONFIG_MMC_DW_EXYNOS)    += dw_mmc-exynos.o
 obj-$(CONFIG_MMC_DW_K3)                += dw_mmc-k3.o
 obj-$(CONFIG_MMC_DW_PCI)       += dw_mmc-pci.o
+obj-$(CONFIG_MMC_DW_ROCKCHIP)  += dw_mmc-rockchip.o
 obj-$(CONFIG_MMC_SH_MMCIF)     += sh_mmcif.o
 obj-$(CONFIG_MMC_JZ4740)       += jz4740_mmc.o
 obj-$(CONFIG_MMC_VUB300)       += vub300.o
diff --git a/drivers/mmc/host/dw_mmc-pltfm.c b/drivers/mmc/host/dw_mmc-pltfm.c
index b547f7a..0c56c41 100644
--- a/drivers/mmc/host/dw_mmc-pltfm.c
+++ b/drivers/mmc/host/dw_mmc-pltfm.c
@@ -26,64 +26,11 @@
 #include "dw_mmc.h"
 #include "dw_mmc-pltfm.h"
 
-#define RK3288_CLKGEN_DIV      2
-
 static void dw_mci_pltfm_prepare_command(struct dw_mci *host, u32 *cmdr)
 {
        *cmdr |= SDMMC_CMD_USE_HOLD_REG;
 }
 
-static int dw_mci_rk3288_setup_clock(struct dw_mci *host)
-{
-       host->bus_hz /= RK3288_CLKGEN_DIV;
-
-       return 0;
-}
-
-static void dw_mci_rk3288_set_ios(struct dw_mci *host, struct mmc_ios *ios)
-{
-       int ret;
-       unsigned int cclkin;
-       u32 bus_hz;
-
-       /*
-        * cclkin: source clock of mmc controller.
-        * bus_hz: card interface clock generated by CLKGEN.
-        * bus_hz = cclkin / RK3288_CLKGEN_DIV;
-        * ios->clock = (div == 0) ? bus_hz : (bus_hz / (2 * div))
-        *
-        * Note: div can only be 0 or 1
-        *       if DDR50 8bit mode(only emmc work in 8bit mode),
-        *       div must be set 1
-        */
-       if ((ios->bus_width == MMC_BUS_WIDTH_8) &&
-           (ios->timing == MMC_TIMING_MMC_DDR52))
-               cclkin = 2 * ios->clock * RK3288_CLKGEN_DIV;
-       else
-               cclkin = ios->clock * RK3288_CLKGEN_DIV;
-
-       ret = clk_set_rate(host->ciu_clk, cclkin);
-       if (ret)
-               dev_warn(host->dev, "failed to set rate %uHz\n", ios->clock);
-
-       bus_hz = clk_get_rate(host->ciu_clk) / RK3288_CLKGEN_DIV;
-       if (bus_hz != host->bus_hz) {
-               host->bus_hz = bus_hz;
-               /* force dw_mci_setup_bus() */
-               host->current_speed = 0;
-       }
-}
-
-static const struct dw_mci_drv_data rk2928_drv_data = {
-       .prepare_command        = dw_mci_pltfm_prepare_command,
-};
-
-static const struct dw_mci_drv_data rk3288_drv_data = {
-       .prepare_command        = dw_mci_pltfm_prepare_command,
-       .set_ios        = dw_mci_rk3288_set_ios,
-       .setup_clock    = dw_mci_rk3288_setup_clock,
-};
-
 static const struct dw_mci_drv_data socfpga_drv_data = {
        .prepare_command        = dw_mci_pltfm_prepare_command,
 };
@@ -144,10 +91,6 @@ EXPORT_SYMBOL_GPL(dw_mci_pltfm_pmops);
 
 static const struct of_device_id dw_mci_pltfm_match[] = {
        { .compatible = "snps,dw-mshc", },
-       { .compatible = "rockchip,rk2928-dw-mshc",
-               .data = &rk2928_drv_data },
-       { .compatible = "rockchip,rk3288-dw-mshc",
-               .data = &rk3288_drv_data },
        { .compatible = "altr,socfpga-dw-mshc",
                .data = &socfpga_drv_data },
        {},
diff --git a/drivers/mmc/host/dw_mmc-rockchip.c 
b/drivers/mmc/host/dw_mmc-rockchip.c
new file mode 100644
index 0000000..f0c2cb1
--- /dev/null
+++ b/drivers/mmc/host/dw_mmc-rockchip.c
@@ -0,0 +1,136 @@
+/*
+ * Copyright (c) 2014, Fuzhou Rockchip Electronics Co., Ltd
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+#include <linux/mmc/host.h>
+#include <linux/mmc/dw_mmc.h>
+#include <linux/of_address.h>
+
+#include "dw_mmc.h"
+#include "dw_mmc-pltfm.h"
+
+#define RK3288_CLKGEN_DIV       2
+
+static void dw_mci_rockchip_prepare_command(struct dw_mci *host, u32 *cmdr)
+{
+       *cmdr |= SDMMC_CMD_USE_HOLD_REG;
+}
+
+static int dw_mci_rk3288_setup_clock(struct dw_mci *host)
+{
+       host->bus_hz /= RK3288_CLKGEN_DIV;
+
+       return 0;
+}
+
+static void dw_mci_rk3288_set_ios(struct dw_mci *host, struct mmc_ios *ios)
+{
+       int ret;
+       unsigned int cclkin;
+       u32 bus_hz;
+
+       /*
+        * cclkin: source clock of mmc controller
+        * bus_hz: card interface clock generated by CLKGEN
+        * bus_hz = cclkin / RK3288_CLKGEN_DIV
+        * ios->clock = (div == 0) ? bus_hz : (bus_hz / (2 * div))
+        *
+        * Note: div can only be 0 or 1
+        *       if DDR50 8bit mode(only emmc work in 8bit mode),
+        *       div must be set 1
+        */
+       if (ios->bus_width == MMC_BUS_WIDTH_8 &&
+           ios->timing == MMC_TIMING_MMC_DDR52)
+               cclkin = 2 * ios->clock * RK3288_CLKGEN_DIV;
+       else
+               cclkin = ios->clock * RK3288_CLKGEN_DIV;
+
+       ret = clk_set_rate(host->ciu_clk, cclkin);
+       if (ret)
+               dev_warn(host->dev, "failed to set rate %uHz\n", ios->clock);
+
+       bus_hz = clk_get_rate(host->ciu_clk) / RK3288_CLKGEN_DIV;
+       if (bus_hz != host->bus_hz) {
+               host->bus_hz = bus_hz;
+               /* force dw_mci_setup_bus() */
+               host->current_speed = 0;
+       }
+}
+
+static const struct dw_mci_drv_data rk2928_drv_data = {
+       .prepare_command        = dw_mci_rockchip_prepare_command,
+};
+
+static const struct dw_mci_drv_data rk3288_drv_data = {
+       .prepare_command        = dw_mci_rockchip_prepare_command,
+       .set_ios                = dw_mci_rk3288_set_ios,
+       .setup_clock    = dw_mci_rk3288_setup_clock,
+};
+
+static const struct of_device_id dw_mci_rockchip_match[] = {
+       { .compatible = "rockchip,rk2928-dw-mshc",
+               .data = &rk2928_drv_data },
+       { .compatible = "rockchip,rk3288-dw-mshc",
+               .data = &rk3288_drv_data },
+       {},
+};
+MODULE_DEVICE_TABLE(of, dw_mci_rockchip_match);
+
+static int dw_mci_rockchip_probe(struct platform_device *pdev)
+{
+       const struct dw_mci_drv_data *drv_data;
+       const struct of_device_id *match;
+
+       if (!pdev->dev.of_node)
+               return -ENODEV;
+
+       match = of_match_node(dw_mci_rockchip_match, pdev->dev.of_node);
+       drv_data = match->data;
+
+       return dw_mci_pltfm_register(pdev, drv_data);
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int dw_mci_rockchip_suspend(struct device *dev)
+{
+       struct dw_mci *host = dev_get_drvdata(dev);
+
+       return dw_mci_suspend(host);
+}
+
+static int dw_mci_rockchip_resume(struct device *dev)
+{
+       struct dw_mci *host = dev_get_drvdata(dev);
+
+       return dw_mci_resume(host);
+}
+#endif /* CONFIG_PM_SLEEP */
+
+static SIMPLE_DEV_PM_OPS(dw_mci_rockchip_pmops,
+                        dw_mci_rockchip_suspend,
+                        dw_mci_rockchip_resume);
+
+static struct platform_driver dw_mci_rockchip_pltfm_driver = {
+       .probe          = dw_mci_rockchip_probe,
+       .remove         = __exit_p(dw_mci_pltfm_remove),
+       .driver         = {
+               .name           = "dwmmc_rockchip",
+               .of_match_table = dw_mci_rockchip_match,
+               .pm             = &dw_mci_rockchip_pmops,
+       },
+};
+
+module_platform_driver(dw_mci_rockchip_pltfm_driver);
+
+MODULE_AUTHOR("Addy Ke <addy...@rock-chips.com>");
+MODULE_DESCRIPTION("Rockchip Specific DW-MSHC Driver Extension");
+MODULE_ALIAS("platform:dwmmc-rockchip");
+MODULE_LICENSE("GPL v2");
-- 
1.8.3.2


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Reply via email to