On Wednesday 13 August 2014 09:04 PM, Gabriel FERNANDEZ wrote:
> The MiPHY28lp is a Generic PHY which can serve various SATA or PCIe
> or USB3 devices.
>
> Signed-off-by: alexandre torgue <[email protected]>
> Signed-off-by: Giuseppe Cavallaro <[email protected]>
> Signed-off-by: Gabriel Fernandez <[email protected]>
> ---
> .../devicetree/bindings/phy/phy-miphy28lp.txt | 126
> +++++++++++++++++++++
> 1 file changed, 126 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/phy/phy-miphy28lp.txt
>
> diff --git a/Documentation/devicetree/bindings/phy/phy-miphy28lp.txt
> b/Documentation/devicetree/bindings/phy/phy-miphy28lp.txt
> new file mode 100644
> index 0000000..6e57bd5
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/phy/phy-miphy28lp.txt
> @@ -0,0 +1,126 @@
> +STMicroelectronics STi MIPHY28LP PHY binding
> +============================================
> +
> +This binding describes a miphy device that is used to control PHY hardware
> +for SATA, PCIe or USB3.
> +
> +Required properties (controller (parent) node):
> +- compatible : Should be "st,miphy28lp-phy"
> +- st,syscfg : Should be a phandle of the system configuration register
> group
^^^
I think here you used space and in the rest of places used tabs.
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
