Hi all,

Please ignore this patch.

Have sent the wrong one.

Thanks,

BRs
Xiubo



> -----Original Message-----
> From: Xiubo Li [mailto:li.xi...@freescale.com]
> Sent: Monday, August 25, 2014 3:03 PM
> To: broo...@kernel.org; nicoleots...@gmail.com; ti...@tabi.org;
> lgirdw...@gmail.com; pe...@perex.cz; ti...@suse.de; alsa-devel@alsa-
> project.org
> Cc: ga...@codeaurora.org; mark.rutl...@arm.com; robh...@kernel.org;
> pawel.m...@arm.com; linux-kernel@vger.kernel.org; Xiubo Li-B47053
> Subject: [PATCHv3] ASoC: fsl-sai: rename big_endian_data to is_lsb_first.
> 
> Signed-off-by: Xiubo Li <li.xi...@freescale.com>
> ---
>  Documentation/devicetree/bindings/sound/fsl-sai.txt | 8 ++++----
>  sound/soc/fsl/fsl_sai.c                             | 6 +++---
>  sound/soc/fsl/fsl_sai.h                             | 2 +-
>  3 files changed, 8 insertions(+), 8 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/sound/fsl-sai.txt
> b/Documentation/devicetree/bindings/sound/fsl-sai.txt
> index 06a405e..929ca74 100644
> --- a/Documentation/devicetree/bindings/sound/fsl-sai.txt
> +++ b/Documentation/devicetree/bindings/sound/fsl-sai.txt
> @@ -20,9 +20,9 @@ Required properties:
>    See ../pinctrl/pinctrl-bindings.txt for details of the property values.
>  - big-endian: Boolean property, required if all the FTM_PWM registers
>    are big-endian rather than little-endian.
> -- big-endian-data: If this property is absent, the little endian mode will
> -  be in use as default, or the big endian mode will be in use for all the
> -  fifo data.
> +- lsb-first: Configures whether the LSB or the MSB is transmitted first for
> +  the fifo data. If this property is absent, the LSB is transmitted first as
> +  default, or the MSB is transmitted first.
>  - fsl,sai-synchronous-rx: This is a boolean property. If present, indicating
>    that SAI will work in the synchronous mode (sync Tx with Rx) which means
>    both the transimitter and receiver will send and receive data by following
> @@ -53,5 +53,5 @@ sai2: sai@40031000 {
>             dmas = <&edma0 0 VF610_EDMA_MUXID0_SAI2_TX>,
>                  <&edma0 0 VF610_EDMA_MUXID0_SAI2_RX>;
>             big-endian;
> -           big-endian-data;
> +           lsb-first;
>  };
> diff --git a/sound/soc/fsl/fsl_sai.c b/sound/soc/fsl/fsl_sai.c
> index a6eb784..7eeb1dd 100644
> --- a/sound/soc/fsl/fsl_sai.c
> +++ b/sound/soc/fsl/fsl_sai.c
> @@ -175,7 +175,7 @@ static int fsl_sai_set_dai_fmt_tr(struct snd_soc_dai
> *cpu_dai,
>       bool tx = fsl_dir == FSL_FMT_TRANSMITTER;
>       u32 val_cr2 = 0, val_cr4 = 0;
> 
> -     if (!sai->big_endian_data)
> +     if (!sai->is_lsb_first)
>               val_cr4 |= FSL_SAI_CR4_MF;
> 
>       /* DAI mode */
> @@ -304,7 +304,7 @@ static int fsl_sai_hw_params(struct snd_pcm_substream
> *substream,
>       val_cr5 |= FSL_SAI_CR5_WNW(word_width);
>       val_cr5 |= FSL_SAI_CR5_W0W(word_width);
> 
> -     if (sai->big_endian_data)
> +     if (sai->is_lsb_first)
>               val_cr5 |= FSL_SAI_CR5_FBT(0);
>       else
>               val_cr5 |= FSL_SAI_CR5_FBT(word_width - 1);
> @@ -573,7 +573,7 @@ static int fsl_sai_probe(struct platform_device *pdev)
>       if (of_device_is_compatible(pdev->dev.of_node, "fsl,imx6sx-sai"))
>               sai->sai_on_imx = true;
> 
> -     sai->big_endian_data = of_property_read_bool(np, "big-endian-data");
> +     sai->is_lsb_first = of_property_read_bool(np, "lsb-first");
> 
>       res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
>       base = devm_ioremap_resource(&pdev->dev, res);
> diff --git a/sound/soc/fsl/fsl_sai.h b/sound/soc/fsl/fsl_sai.h
> index 2cded44..3466720 100644
> --- a/sound/soc/fsl/fsl_sai.h
> +++ b/sound/soc/fsl/fsl_sai.h
> @@ -132,7 +132,7 @@ struct fsl_sai {
>       struct clk *bus_clk;
>       struct clk *mclk_clk[FSL_SAI_MCLK_MAX];
> 
> -     bool big_endian_data;
> +     bool is_lsb_first;
>       bool is_dsp_mode;
>       bool sai_on_imx;
>       bool synchronous[2];
> --
> 1.8.5

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Reply via email to