From: Chao Xie <chao....@marvell.com>
For the clk-frac, we need to make sure that the initial
clock rate is one item of the table.
If it is not, we use the first item in the table by default.
Signed-off-by: Chao Xie <chao....@marvell.com>
---
drivers/clk/mmp/clk-frac.c | 40 ++++++++++++++++++++++++++++++++++++++++
1 file changed, 40 insertions(+)
diff --git a/drivers/clk/mmp/clk-frac.c b/drivers/clk/mmp/clk-frac.c
index e29d006..1876d2c 100644
--- a/drivers/clk/mmp/clk-frac.c
+++ b/drivers/clk/mmp/clk-frac.c
@@ -118,10 +118,50 @@ static int clk_factor_set_rate(struct clk_hw *hw,
unsigned long drate,
return 0;
}
+void clk_factor_init(struct clk_hw *hw)
+{
+ struct mmp_clk_factor *factor = to_clk_factor(hw);
+ struct mmp_clk_factor_masks *masks = factor->masks;
+ u32 val, num, den;
+ int i;
+ unsigned long flags = 0;
+
+ if (factor->lock)
+ spin_lock_irqsave(factor->lock, flags);
+
+ val = readl(factor->base);
+
+ /* calculate numerator */
+ num = (val >> masks->num_shift) & masks->num_mask;
+
+ /* calculate denominator */
+ den = (val >> masks->den_shift) & masks->den_mask;
+
+ for (i = 0; i < factor->ftbl_cnt; i++)
+ if (den == factor->ftbl[i].den && num == factor->ftbl[i].num)
+ break;
+
+ if (i >= factor->ftbl_cnt) {
+ val &= ~(masks->num_mask << masks->num_shift);
+ val |= (factor->ftbl[0].num & masks->num_mask) <<
+ masks->num_shift;
+
+ val &= ~(masks->den_mask << masks->den_shift);
+ val |= (factor->ftbl[0].den & masks->den_mask) <<
+ masks->den_shift;
+
+ writel(val, factor->base);
+ }
+
+ if (factor->lock)
+ spin_unlock_irqrestore(factor->lock, flags);
+}
+
static struct clk_ops clk_factor_ops = {
.recalc_rate = clk_factor_recalc_rate,
.round_rate = clk_factor_round_rate,
.set_rate = clk_factor_set_rate,
+ .init = clk_factor_init,
};
struct clk *mmp_clk_register_factor(const char *name, const char *parent_name,
--
1.8.3.2
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
