Add device tree bindings documentation and a header file
for rockchip's RK808 pmic.
Signed-off-by: Chris Zhong <z...@rock-chips.com>
Signed-off-by: Zhang Qing <zhangq...@rock-chips.com>
---
Changes in v6:
Advices by Mark Rutland
- add description about clock-cells
Advices by Doug
- modify description about regulator
- remove pinctrl description
Changes in v5:
Advices by Mark Brown
- add description about regulator valid name.
- add a header file "rockchip,rk808".
Changes in v4:
Advices by Doug
- add a "#clock-cells" propertiy
- update the example
Changes in v3: None
Changes in v2: None
Documentation/devicetree/bindings/mfd/rk808.txt | 150 +++++++++++++++++++++++
include/dt-bindings/clock/rockchip,rk808.h | 11 ++
2 files changed, 161 insertions(+)
create mode 100644 Documentation/devicetree/bindings/mfd/rk808.txt
create mode 100644 include/dt-bindings/clock/rockchip,rk808.h
diff --git a/Documentation/devicetree/bindings/mfd/rk808.txt
b/Documentation/devicetree/bindings/mfd/rk808.txt
new file mode 100644
index 0000000..6c39360
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/rk808.txt
@@ -0,0 +1,150 @@
+RK808 Power Management Integrated Circuit
+
+Required properties:
+- compatible: "rockchip,rk808"
+- reg: I2C slave address
+- interrupt-parent: The parent interrupt controller.
+- interrupts: the interrupt outputs of the controller.
+- #clock-cells: RK808 has 2 clkout, they are always 32khz,
+ the value should be 1
+
+Optional properties:
+- clock-output-names: From common clock binding to override the
+ default output clock name
+- rockchip,system-power-controller: Telling whether or not this pmic is
controlling
+ the system power.
+
+Regulators: All the regulators of RK808 to be instantiated shall be
+listed in a child node named 'regulators'. Each regulator is represented
+by a child node of the 'regulators' node.
+
+ regulator-name {
+ /* standard regulator bindings here */
+ };
+
+Following regulators of the RK808 PMIC block are supported. Note that
+the 'n' in regulator name, as in DCDC_REGn or LDOn, represents the DCDC or LDO
+number as described in RK808 datasheet.
+
+ - DCDC_REGn
+ - valid values for n are 1 to 4.
+ - LDO_REGn
+ - valid values for n are 1 to 8.
+ - SWITCH_REGn
+ - valid values for n are 1 to 2
+
+Standard regulator bindings are used inside regulator subnodes. Check
+ Documentation/devicetree/bindings/regulator/regulator.txt
+for more details
+
+Example:
+ rk808: pmic@1b {
+ compatible = "rockchip,rk808";
+ interrupt-parent = <&gpio0>;
+ interrupts = <4 IRQ_TYPE_EDGE_FALLING>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pmic_int>;
+ reg = <0x1b>;
+ #clock-cells = <1>;
+ clock-output-names = "xin32k0", "xin32k1";
+ rockchip,system-power-controller;
+
+ regulators {
+ rk808_dcdc1_reg: DCDC_REG1 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-name = "vdd_arm";
+ };
+
+ rk808_dcdc2_reg: DCDC_REG2 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <1250000>;
+ regulator-name = "vdd_gpu";
+ };
+
+ rk808_dcdc3_reg: DCDC_REG3 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-name = "vdd_ddr";
+ };
+
+ rk808_dcdc4_reg: DCDC_REG4 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vccio";
+ };
+
+ rk808_ldo1_reg: LDO_REG1 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ rk808_ldo2_reg: LDO_REG2 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ rk808_ldo3_reg: LDO_REG3 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-name = "LDO_REG3";
+ };
+
+ rk808_ldo4_reg: LDO_REG4 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ rk808_ldo5_reg: LDO_REG5 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ rk808_ldo6_reg: LDO_REG6 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ };
+
+ rk808_ldo7_reg: LDO_REG7 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ rk808_ldo8_reg: LDO_REG8 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ rk808_switch1_reg: SWITCH_REG1 {
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ rk808_switch2_reg: SWITCH_REG2 {
+ regulator-always-on;
+ regulator-boot-on;
+ };
+ };
+ };
diff --git a/include/dt-bindings/clock/rockchip,rk808.h
b/include/dt-bindings/clock/rockchip,rk808.h
new file mode 100644
index 0000000..1a87343
--- /dev/null
+++ b/include/dt-bindings/clock/rockchip,rk808.h
@@ -0,0 +1,11 @@
+/*
+ * This header provides constants clk index RK808 pmic clkout
+ */
+#ifndef _CLK_ROCKCHIP_RK808
+#define _CLK_ROCKCHIP_RK808
+
+/* CLOCKOUT index */
+#define RK808_CLKOUT0 0
+#define RK808_CLKOUT1 1
+
+#endif
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
