Hello,
[1.] One line summary of the problem:
On Linux 3.16 a custom-built kernel with bhyve won't boot and will hang on the
APIC timer calibration.
[2.] Full description of the problem/report:
I'm booting a 3.16 in bhyve (FreeBSD hypervisor) and according to my tests
lapic_cal_handler never gets called. This prevents the lapic_cal_loops
counter from being incremented and therefore the APIC calibration never
finishes. It is supposed to be called 25 times (APIC_CAL_LOOPS
constant). I added some apic_printk's to check for these infos (not a
best practice but I don't have access to a debugger in this specific
context).
[3.] Keywords (i.e., modules, networking, kernel):
kernel, apic
[4.] Kernel version (from /proc/version):
n/a (won't boot)
Linux version 3.16.1-bhyve (root@localhost) (gcc version 4.8.2 (Funtoo
4.8.2-r2) ) #22 SMP Fri Aug 29 12:23:32 Local
[5.] Output of Oops.. message (if applicable) with symbolic information
resolved (see Documentation/oops-tracing.txt)
N/A
[6.] A small shell script or example program which triggers the
problem (if possible)
N/A
[7.] Environment
[7.1.] Software (add the output of the ver_linux script here)
If some fields are empty or look unusual you may have an old version.
Compare to the current minimal requirements in Documentation/Changes.
Linux localhost 3.2.0-4-amd64 #1 SMP Debian 3.2.60-1+deb7u3 x86_64 Intel(R) Xeon(R)
CPU E3-1240 v3 @ 3.40GHz GenuineIntel GNU/Linux
Gnu C 4.8.2
Gnu make 4.0
binutils 2.23.2
1.0
2.23.2
util-linux scripts/ver_linux: line 23: fdformat: command not found
mount assert
module-init-tools 15
e2fsprogs 1.42.10
xfsprogs 3.1.11
Linux C Library 2.18
Dynamic linker (ldd) 2.18
Procps 3.3.9
Net-tools 1.60_p20130513023548
Kbd 2.0.1
Sh-utils 8.21
Modules Loaded ext4 crc16 jbd2 mbcache sg sr_mod cdrom virtio_blk
virtio_net ahci libahci libata scsi_mod virtio_pci virtio_ring virtio
[7.2.] Processor information (from /proc/cpuinfo):
[snip]
processor : 3
vendor_id : GenuineIntel
cpu family : 6
model : 60
model name : Intel(R) Xeon(R) CPU E3-1240 v3 @ 3.40GHz
stepping : 3
cpu MHz : 3388.196
cache size : 0 KB
fpu : yes
fpu_exception : yes
cpuid level : 13
wp : yes
flags : fpu vme de pse tsc msr pae cx8 apic sep pge cmov pat pse36
clflush mmx fxsr sse sse2 ss pbe syscall nx pdpe1gb lm constant_tsc rep_good
nopl nonstop_tsc pni pclmulqdq dtes64 ds_cpl smx ssse3 fma cx16 xtpr pcid
sse4_1 sse4_2 movbe popcnt aes xsave avx f16c rdrand hypervisor lahf_lm abm
xsaveopt fsgsbase erms
bogomips : 6776.74
clflush size : 64
cache_alignment : 64
address sizes : 39 bits physical, 48 bits virtual
[7.3.] Module information (from /proc/modules):
N/A
[7.4.] Loaded driver and hardware information (/proc/ioports, /proc/iomem)
/proc/ioports
0000-0cf7 : PCI Bus 0000:00
0000-001f : dma1
0020-0021 : pic1
0040-0043 : timer0
0050-0053 : timer1
0060-0060 : keyboard
0064-0064 : keyboard
0080-008f : dma page reg
00a0-00a1 : pic2
00c0-00df : dma2
00f0-00ff : fpu
0220-0223 : pnp 00:01
0224-0227 : pnp 00:01
02f8-02ff : serial
03f8-03ff : serial
0400-0407 : pnp 00:01
0400-0403 : ACPI PM1a_EVT_BLK
0404-0405 : ACPI PM1a_CNT_BLK
0408-040b : ACPI PM_TMR
04d0-04d1 : pnp 00:01
0cf8-0cff : PCI conf1
0d00-1fff : PCI Bus 0000:00
2000-209f : PCI Bus 0000:00
2000-203f : 0000:00:01.0
2000-203f : virtio-pci
2040-205f : 0000:00:02.0
2040-205f : virtio-pci
2060-207f : 0000:00:03.0
2060-207f : virtio-pci
/proc/iomem
00000000-0000ffff : reserved
00010000-0009fffe : System RAM
000f0000-000fffff : System ROM
00100000-bfffffff : System RAM
01000000-01359d65 : Kernel code
01359d66-01694f7f : Kernel data
0172a000-01807fff : Kernel bss
c0000000-c01fffff : PCI Bus 0000:00
c0000000-c0001fff : 0000:00:01.0
c0000000-c0001fff : virtio-pci
c0002000-c0003fff : 0000:00:02.0
c0002000-c0003fff : virtio-pci
c0004000-c0005fff : 0000:00:03.0
c0004000-c0005fff : virtio-pci
c0006000-c00063ff : 0000:00:04.0
c0006000-c00063ff : ahci
c0006800-c0006fff : 0000:00:01.0
c0007000-c00077ff : 0000:00:02.0
c0007800-c0007fff : 0000:00:03.0
c0008000-c00087ff : 0000:00:04.0
c0008800-c0008fff : 0000:00:0f.0
e0000000-efffffff : PCI MMCONFIG 0000 [bus 00-ff]
e0000000-efffffff : pnp 00:01
fec00000-fec003ff : IOAPIC 0
fed00000-fed003ff : HPET 0
fee00000-fee00fff : Local APIC
100000000-13fffffff : System RAM
[7.5.] PCI information ('lspci -vvv' as root)
root@localhost:/# lspci -vvv
00:00.0 Host bridge: Network Appliance Corporation Device 1275
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF+ FastB2B+ ParErr+ DEVSEL=?? >TAbort+ <TAbort+
<MAbort+ >SERR+ <PERR+ INTx+
Latency: 64
Bus: primary=00, secondary=00, subordinate=00, sec-latency=0
I/O behind bridge: 00000000-00000fff
Memory behind bridge: 00000000-000fffff
Prefetchable memory behind bridge: 00000000-000fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Express (v2) Root Port (Slot-), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1
<1us
ExtTag- RBE- FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr-
TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s, Latency L0
<64ns, L1 <1us
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk-
DLActive- BWMgmt- ABWMgmt-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna-
CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
DevCap2: Completion Timeout: Not Supported, TimeoutDis- ARIFwd-
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- ARIFwd-
LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance-
SpeedDis-, Selectable De-emphasis: -6dB
Transmit Margin: Normal Operating Range,
EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -6dB,
EqualizationComplete-, EqualizationPhase1-
EqualizationPhase2-, EqualizationPhase3-,
LinkEqualizationRequest-
00:01.0 SCSI storage controller: Red Hat, Inc Virtio block device
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 64
Interrupt: pin A routed to IRQ 16
Region 0: I/O ports at 2000 [size=64]
Region 1: Memory at c0000000 (32-bit, non-prefetchable) [size=8K]
[virtual] Expansion ROM at c0006800 [disabled] [size=2K]
Capabilities: [40] MSI-X: Enable+ Count=2 Masked-
Vector table: BAR=1 offset=00000000
PBA: BAR=1 offset=00001000
Capabilities: [4c] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
00:02.0 Ethernet controller: Red Hat, Inc Virtio network device
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 64
Interrupt: pin A routed to IRQ 17
Region 0: I/O ports at 2040 [size=32]
Region 1: Memory at c0002000 (32-bit, non-prefetchable) [size=8K]
[virtual] Expansion ROM at c0007000 [disabled] [size=2K]
Capabilities: [40] MSI-X: Enable+ Count=3 Masked-
Vector table: BAR=1 offset=00000000
PBA: BAR=1 offset=00001000
Capabilities: [4c] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
00:03.0 Ethernet controller: Red Hat, Inc Virtio network device
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 64
Interrupt: pin A routed to IRQ 18
Region 0: I/O ports at 2060 [size=32]
Region 1: Memory at c0004000 (32-bit, non-prefetchable) [size=8K]
[virtual] Expansion ROM at c0007800 [disabled] [size=2K]
Capabilities: [40] MSI-X: Enable+ Count=3 Masked-
Vector table: BAR=1 offset=00000000
PBA: BAR=1 offset=00001000
Capabilities: [4c] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
00:04.0 SATA controller: Intel Corporation 82801HR/HO/HH (ICH8R/DO/DH) 6 port
SATA Controller [AHCI mode] (prog-if 01 [AHCI 1.0])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 64
Interrupt: pin A routed to IRQ 44
Region 5: Memory at c0006000 (32-bit, non-prefetchable) [size=1K]
[virtual] Expansion ROM at c0008000 [disabled] [size=2K]
Capabilities: [40] MSI: Enable+ Count=1/1 Maskable- 64bit+
Address: 00000000fee00000 Data: 4091
00:0f.0 ISA bridge: Intel Corporation 82371SB PIIX3 ISA [Natoma/Triton II]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
[virtual] Expansion ROM at c0008800 [disabled] [size=2K]
root@localhost:/#
[7.6.] SCSI information (from /proc/scsi/scsi)
N/A
[7.7.] Other information that might be relevant to the problem
A stock Debian 3.2 kernel will boot. I don't have the possibility to build such
a bloated kernel to
see what's missing. My goal is to identify what is the minimal set of
functionalities needed to have
a kernel start up in a bhyve context. I have several other Linux VMs able to
run on this hypervisor,
none with such a recent kernel.
Yours sincerely,
--
Chloé Desoutter
C[A-Z]O, Atasta NET
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
