On 09/03/2014 03:39 PM, jonghwa3....@samsung.com wrote: > On 2014년 09월 03일 14:55, Chanwoo Choi wrote: > >> On 09/03/2014 02:50 PM, Jonghwa Lee wrote: >>> When it writes some value other than 0 to BTLDset and JIGset, muic device >>> will be reset automatically. And it happens during updating ADC debounce >>> time, >>> because it shares same register. To update ADC debounce time without reset, >>> set value only to ADCDbset and 0 to BTLDset and JIGset. >>> >>> Signed-off-by: Jonghwa Lee <jonghwa3....@samsung.com> >>> --- >>> drivers/extcon/extcon-max77693.c | 11 ++++++++--- >>> 1 file changed, 8 insertions(+), 3 deletions(-) >>> >>> diff --git a/drivers/extcon/extcon-max77693.c >>> b/drivers/extcon/extcon-max77693.c >>> index 77460f2..661a3bb 100644 >>> --- a/drivers/extcon/extcon-max77693.c >>> +++ b/drivers/extcon/extcon-max77693.c >>> @@ -255,10 +255,15 @@ static int max77693_muic_set_debounce_time(struct >>> max77693_muic_info *info, >>> case ADC_DEBOUNCE_TIME_10MS: >>> case ADC_DEBOUNCE_TIME_25MS: >>> case ADC_DEBOUNCE_TIME_38_62MS: >>> - ret = regmap_update_bits(info->max77693->regmap_muic, >>> + /* >>> + * Don't touch BTLDset, JIGset when you want to change adc >>> + * debounce time. BTLDset, JIGset reflects actual pin status >>> + * and are not configurable. >>> + */ >>> + ret = regmap_write_bits(info->max77693->regmap_muic, >>> MAX77693_MUIC_REG_CTRL3, >>> - CONTROL3_ADCDBSET_MASK, >>> - time << CONTROL3_ADCDBSET_SHIFT); >>> + (CONTROL3_ADCDBSET_MASK & >>> + time << CONTROL3_ADCDBSET_SHIFT)); >> >> Do you make this patch on extcon-next branch? >> >> The max77693_muic_set_debounce_time() of extcon-max77693.c >> use regmap_update_bits instead of regmap_write_bits as following: > > > This patch intends to use 'regmap_write_bits()' not 'regmap_update_bits()'.
You're right. It is my mistake to review this patch. > With using regmap_update_bits(), it would writes some value to BTLDset and > JIGset then muic device will loose current state. OK, I'll apply yout next patch(v2). Thanks, Chanwoo Choi -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/