On 09/06/2014 09:47 AM, Evgeny Boger wrote:
From: Evgeny Boger <bo...@contactless.ru>
Add option to use with watchdog timers which are always enabled
in hardware, i.e. there is no way to enable/disable it via GPIO pin.
The driver will start pinging WDT immediately upon loading
and will continue to do so even after stopping the watchdog.
Signed-off-by: Evgeny Boger <bo...@contactless.ru>
---
Overall looks good to me, though we really need feedback from the DT folks
on the binding. There is a parallel effort to add this functionality into
the watchdog core, meaning the proposed binding "'always-enabled' will
very likely find its way into other drivers. We'll also need a separate
binding to express "watchdog can not be stopped after started once".
That is a separate issue, but important to keep in mind when discussing
the bindings.
Thanks,
Guenter
Changes since v1:
* fixed typos and indentation
* gpio_wdt_start_timer renamed to gpio_wdt_start_hwping.
This function actually starts the timer to ping hardware.
I personally find both proposed gpio_wdt_enable and __gpio_wdt_start
names discouraging in this context.
* fixed broken error handling for register_reboot_notifier
.../devicetree/bindings/watchdog/gpio-wdt.txt | 14 ++++++-
drivers/watchdog/gpio_wdt.c | 46 +++++++++++++++++-----
2 files changed, 50 insertions(+), 10 deletions(-)
diff --git a/Documentation/devicetree/bindings/watchdog/gpio-wdt.txt
b/Documentation/devicetree/bindings/watchdog/gpio-wdt.txt
index 37afec1..047fe3f 100644
--- a/Documentation/devicetree/bindings/watchdog/gpio-wdt.txt
+++ b/Documentation/devicetree/bindings/watchdog/gpio-wdt.txt
@@ -12,8 +12,11 @@ Required Properties:
the opposite level disables the WDT. Active level is determined
by the GPIO flags.
- hw_margin_ms: Maximum time to reset watchdog circuit (milliseconds).
+- always-enabled: Use with watchdog timer which is always enabled
+ in hardware, i.e. there is no way to enable/disable it via GPIO pin.
+ Driver will start pinging WDT immediately upon loading.
-Example:
+Examples:
watchdog: watchdog {
/* ADM706 */
compatible = "linux,wdt-gpio";
@@ -21,3 +24,12 @@ Example:
hw_algo = "toggle";
hw_margin_ms = <1600>;
};
+
+ watchdog: watchdog {
+ /* TPS3813 */
+ compatible = "linux,wdt-gpio";
+ gpios = <&gpio3 9 GPIO_ACTIVE_LOW>;
+ hw_algo = "toggle";
+ hw_margin_ms = <10000>;
+ always-enabled;
+ };
diff --git a/drivers/watchdog/gpio_wdt.c b/drivers/watchdog/gpio_wdt.c
index 220a9e0..b6ab6e7 100644
--- a/drivers/watchdog/gpio_wdt.c
+++ b/drivers/watchdog/gpio_wdt.c
@@ -37,6 +37,8 @@ struct gpio_wdt_priv {
struct notifier_block notifier;
struct timer_list timer;
struct watchdog_device wdd;
+ bool always_enabled;
+ bool started;
};
static void gpio_wdt_disable(struct gpio_wdt_priv *priv)
@@ -48,10 +50,8 @@ static void gpio_wdt_disable(struct gpio_wdt_priv *priv)
gpio_direction_input(priv->gpio);
}
-static int gpio_wdt_start(struct watchdog_device *wdd)
+static int gpio_wdt_start_hwping(struct gpio_wdt_priv *priv)
{
- struct gpio_wdt_priv *priv = watchdog_get_drvdata(wdd);
-
priv->state = priv->active_low;
gpio_direction_output(priv->gpio, priv->state);
priv->last_jiffies = jiffies;
@@ -60,12 +60,30 @@ static int gpio_wdt_start(struct watchdog_device *wdd)
return 0;
}
+static int gpio_wdt_start(struct watchdog_device *wdd)
+{
+ struct gpio_wdt_priv *priv = watchdog_get_drvdata(wdd);
+
+ priv->started = true;
+ if (priv->always_enabled) {
+ /* hardware ping timer is already enabled */
+ priv->last_jiffies = jiffies;
+ } else {
+ gpio_wdt_start_hwping(priv);
+ }
+
+ return 0;
+}
+
static int gpio_wdt_stop(struct watchdog_device *wdd)
{
struct gpio_wdt_priv *priv = watchdog_get_drvdata(wdd);
- mod_timer(&priv->timer, 0);
- gpio_wdt_disable(priv);
+ priv->started = false;
+ if (!priv->always_enabled) {
+ mod_timer(&priv->timer, 0);
+ gpio_wdt_disable(priv);
+ }
return 0;
}
@@ -91,8 +109,9 @@ static void gpio_wdt_hwping(unsigned long data)
struct watchdog_device *wdd = (struct watchdog_device *)data;
struct gpio_wdt_priv *priv = watchdog_get_drvdata(wdd);
- if (time_after(jiffies, priv->last_jiffies +
- msecs_to_jiffies(wdd->timeout * 1000))) {
+ if (priv->started &&
+ time_after(jiffies, priv->last_jiffies +
+ msecs_to_jiffies(wdd->timeout * 1000))) {
dev_crit(wdd->dev, "Timer expired. System will reboot soon!\n");
return;
}
@@ -197,6 +216,9 @@ static int gpio_wdt_probe(struct platform_device *pdev)
/* Use safe value (1/2 of real timeout) */
priv->hw_margin = msecs_to_jiffies(hw_margin / 2);
+ priv->always_enabled = of_property_read_bool(pdev->dev.of_node,
+ "always-enabled");
+
watchdog_set_drvdata(&priv->wdd, priv);
priv->wdd.info = &gpio_wdt_ident;
@@ -207,6 +229,7 @@ static int gpio_wdt_probe(struct platform_device *pdev)
if (watchdog_init_timeout(&priv->wdd, 0, &pdev->dev) < 0)
priv->wdd.timeout = SOFT_TIMEOUT_DEF;
+ priv->started = false;
setup_timer(&priv->timer, gpio_wdt_hwping, (unsigned long)&priv->wdd);
ret = watchdog_register_device(&priv->wdd);
@@ -215,10 +238,15 @@ static int gpio_wdt_probe(struct platform_device *pdev)
priv->notifier.notifier_call = gpio_wdt_notify_sys;
ret = register_reboot_notifier(&priv->notifier);
- if (ret)
+ if (ret) {
watchdog_unregister_device(&priv->wdd);
+ return ret;
+ }
- return ret;
+ if (priv->always_enabled)
+ gpio_wdt_start_hwping(priv);
+
+ return 0;
}
static int gpio_wdt_remove(struct platform_device *pdev)
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
