I2C_CLKDIV register descripted in the previous version of
RK3x chip manual is incorrect. Plus 1 is required.
The correct formula:
- T(SCL_HIGH) = T(PCLK) * (CLKDIVH + 1) * 8
- T(SCL_LOW) = T(PCLK) * (CLKDIVL + 1) * 8
- (SCL Divsor) = 8 * ((CLKDIVL + 1) + (CLKDIVH + 1))
- SCL = PCLK / (CLK Divsor)
It will be updated to the latest version of chip manual.
Signed-off-by: Addy Ke <addy...@rock-chips.com>
---
changes since v1:
- make it more cleaner, suggested by Doug Anderson
drivers/i2c/busses/i2c-rk3x.c | 11 +++++------
1 file changed, 5 insertions(+), 6 deletions(-)
diff --git a/drivers/i2c/busses/i2c-rk3x.c b/drivers/i2c/busses/i2c-rk3x.c
index e637c32..93cfc83 100644
--- a/drivers/i2c/busses/i2c-rk3x.c
+++ b/drivers/i2c/busses/i2c-rk3x.c
@@ -433,12 +433,11 @@ static void rk3x_i2c_set_scl_rate(struct rk3x_i2c *i2c,
unsigned long scl_rate)
unsigned long i2c_rate = clk_get_rate(i2c->clk);
unsigned int div;
- /* SCL rate = (clk rate) / (8 * DIV) */
- div = DIV_ROUND_UP(i2c_rate, scl_rate * 8);
-
- /* The lower and upper half of the CLKDIV reg describe the length of
- * SCL low & high periods. */
- div = DIV_ROUND_UP(div, 2);
+ /* set DIV = DIVH = DIVL
+ * SCL rate = (clk rate) / (8 * (DIVH + 1 + DIVL + 1))
+ * = (clk rate) / (16 * (DIV + 1))
+ */
+ div = DIV_ROUND_UP(i2c_rate, scl_rate * 16) - 1;
i2c_writel(i2c, (div << 16) | (div & 0xffff), REG_CLKDIV);
}
--
1.8.3.2
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
