More XPowers PMIC devices can be supported by extending this driver, so
rename it to axp2xx to cover axp288 variant.
Signed-off-by: Jacob Pan <jacob.jun....@linux.intel.com>
---
drivers/mfd/Kconfig | 7 +-
drivers/mfd/Makefile | 2 +-
drivers/mfd/axp20x.c | 258 ---------------------------------------------
drivers/mfd/axp2xx.c | 258 +++++++++++++++++++++++++++++++++++++++++++++
include/linux/mfd/axp20x.h | 180 -------------------------------
include/linux/mfd/axp2xx.h | 180 +++++++++++++++++++++++++++++++
6 files changed, 443 insertions(+), 442 deletions(-)
delete mode 100644 drivers/mfd/axp20x.c
create mode 100644 drivers/mfd/axp2xx.c
delete mode 100644 include/linux/mfd/axp20x.h
create mode 100644 include/linux/mfd/axp2xx.h
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index de5abf2..42a70a3 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -67,14 +67,15 @@ config MFD_BCM590XX
help
Support for the BCM590xx PMUs from Broadcom
-config MFD_AXP20X
- bool "X-Powers AXP20X"
+config MFD_AXP2XX
+ bool "X-Powers AXP2XX"
select MFD_CORE
select REGMAP_I2C
select REGMAP_IRQ
depends on I2C=y
help
- If you say Y here you get support for the X-Powers AXP202 and AXP209.
+ If you say Y here you get support for the X-Powers AXP202, AXP209 and
+ AXP288 power management IC (PMIC).
This driver include only the core APIs. You have to select individual
components like regulators or the PEK (Power Enable Key) under the
corresponding menus.
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index f001487..55d76b3 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -103,7 +103,7 @@ obj-$(CONFIG_PMIC_DA9052) += da9052-irq.o
obj-$(CONFIG_PMIC_DA9052) += da9052-core.o
obj-$(CONFIG_MFD_DA9052_SPI) += da9052-spi.o
obj-$(CONFIG_MFD_DA9052_I2C) += da9052-i2c.o
-obj-$(CONFIG_MFD_AXP20X) += axp20x.o
+obj-$(CONFIG_MFD_AXP2XX) += axp2xx.o
obj-$(CONFIG_MFD_LP3943) += lp3943.o
obj-$(CONFIG_MFD_LP8788) += lp8788.o lp8788-irq.o
diff --git a/drivers/mfd/axp20x.c b/drivers/mfd/axp20x.c
deleted file mode 100644
index dee6539..0000000
--- a/drivers/mfd/axp20x.c
+++ /dev/null
@@ -1,258 +0,0 @@
-/*
- * axp20x.c - MFD core driver for the X-Powers AXP202 and AXP209
- *
- * AXP20x comprises an adaptive USB-Compatible PWM charger, 2 BUCK DC-DC
- * converters, 5 LDOs, multiple 12-bit ADCs of voltage, current and temperature
- * as well as 4 configurable GPIOs.
- *
- * Author: Carlo Caione <ca...@caione.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/err.h>
-#include <linux/i2c.h>
-#include <linux/interrupt.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/pm_runtime.h>
-#include <linux/regmap.h>
-#include <linux/slab.h>
-#include <linux/regulator/consumer.h>
-#include <linux/mfd/axp20x.h>
-#include <linux/mfd/core.h>
-#include <linux/of_device.h>
-#include <linux/of_irq.h>
-
-#define AXP20X_OFF 0x80
-
-static const struct regmap_range axp20x_writeable_ranges[] = {
- regmap_reg_range(AXP20X_DATACACHE(0), AXP20X_IRQ5_STATE),
- regmap_reg_range(AXP20X_DCDC_MODE, AXP20X_FG_RES),
-};
-
-static const struct regmap_range axp20x_volatile_ranges[] = {
- regmap_reg_range(AXP20X_IRQ1_EN, AXP20X_IRQ5_STATE),
-};
-
-static const struct regmap_access_table axp20x_writeable_table = {
- .yes_ranges = axp20x_writeable_ranges,
- .n_yes_ranges = ARRAY_SIZE(axp20x_writeable_ranges),
-};
-
-static const struct regmap_access_table axp20x_volatile_table = {
- .yes_ranges = axp20x_volatile_ranges,
- .n_yes_ranges = ARRAY_SIZE(axp20x_volatile_ranges),
-};
-
-static struct resource axp20x_pek_resources[] = {
- {
- .name = "PEK_DBR",
- .start = AXP20X_IRQ_PEK_RIS_EDGE,
- .end = AXP20X_IRQ_PEK_RIS_EDGE,
- .flags = IORESOURCE_IRQ,
- }, {
- .name = "PEK_DBF",
- .start = AXP20X_IRQ_PEK_FAL_EDGE,
- .end = AXP20X_IRQ_PEK_FAL_EDGE,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static const struct regmap_config axp20x_regmap_config = {
- .reg_bits = 8,
- .val_bits = 8,
- .wr_table = &axp20x_writeable_table,
- .volatile_table = &axp20x_volatile_table,
- .max_register = AXP20X_FG_RES,
- .cache_type = REGCACHE_RBTREE,
-};
-
-#define AXP20X_IRQ(_irq, _off, _mask) \
- [AXP20X_IRQ_##_irq] = { .reg_offset = (_off), .mask = BIT(_mask) }
-
-static const struct regmap_irq axp20x_regmap_irqs[] = {
- AXP20X_IRQ(ACIN_OVER_V, 0, 7),
- AXP20X_IRQ(ACIN_PLUGIN, 0, 6),
- AXP20X_IRQ(ACIN_REMOVAL, 0, 5),
- AXP20X_IRQ(VBUS_OVER_V, 0, 4),
- AXP20X_IRQ(VBUS_PLUGIN, 0, 3),
- AXP20X_IRQ(VBUS_REMOVAL, 0, 2),
- AXP20X_IRQ(VBUS_V_LOW, 0, 1),
- AXP20X_IRQ(BATT_PLUGIN, 1, 7),
- AXP20X_IRQ(BATT_REMOVAL, 1, 6),
- AXP20X_IRQ(BATT_ENT_ACT_MODE, 1, 5),
- AXP20X_IRQ(BATT_EXIT_ACT_MODE, 1, 4),
- AXP20X_IRQ(CHARG, 1, 3),
- AXP20X_IRQ(CHARG_DONE, 1, 2),
- AXP20X_IRQ(BATT_TEMP_HIGH, 1, 1),
- AXP20X_IRQ(BATT_TEMP_LOW, 1, 0),
- AXP20X_IRQ(DIE_TEMP_HIGH, 2, 7),
- AXP20X_IRQ(CHARG_I_LOW, 2, 6),
- AXP20X_IRQ(DCDC1_V_LONG, 2, 5),
- AXP20X_IRQ(DCDC2_V_LONG, 2, 4),
- AXP20X_IRQ(DCDC3_V_LONG, 2, 3),
- AXP20X_IRQ(PEK_SHORT, 2, 1),
- AXP20X_IRQ(PEK_LONG, 2, 0),
- AXP20X_IRQ(N_OE_PWR_ON, 3, 7),
- AXP20X_IRQ(N_OE_PWR_OFF, 3, 6),
- AXP20X_IRQ(VBUS_VALID, 3, 5),
- AXP20X_IRQ(VBUS_NOT_VALID, 3, 4),
- AXP20X_IRQ(VBUS_SESS_VALID, 3, 3),
- AXP20X_IRQ(VBUS_SESS_END, 3, 2),
- AXP20X_IRQ(LOW_PWR_LVL1, 3, 1),
- AXP20X_IRQ(LOW_PWR_LVL2, 3, 0),
- AXP20X_IRQ(TIMER, 4, 7),
- AXP20X_IRQ(PEK_RIS_EDGE, 4, 6),
- AXP20X_IRQ(PEK_FAL_EDGE, 4, 5),
- AXP20X_IRQ(GPIO3_INPUT, 4, 3),
- AXP20X_IRQ(GPIO2_INPUT, 4, 2),
- AXP20X_IRQ(GPIO1_INPUT, 4, 1),
- AXP20X_IRQ(GPIO0_INPUT, 4, 0),
-};
-
-static const struct of_device_id axp20x_of_match[] = {
- { .compatible = "x-powers,axp202", .data = (void *) AXP202_ID },
- { .compatible = "x-powers,axp209", .data = (void *) AXP209_ID },
- { },
-};
-MODULE_DEVICE_TABLE(of, axp20x_of_match);
-
-/*
- * This is useless for OF-enabled devices, but it is needed by I2C subsystem
- */
-static const struct i2c_device_id axp20x_i2c_id[] = {
- { },
-};
-MODULE_DEVICE_TABLE(i2c, axp20x_i2c_id);
-
-static const struct regmap_irq_chip axp20x_regmap_irq_chip = {
- .name = "axp20x_irq_chip",
- .status_base = AXP20X_IRQ1_STATE,
- .ack_base = AXP20X_IRQ1_STATE,
- .mask_base = AXP20X_IRQ1_EN,
- .num_regs = 5,
- .irqs = axp20x_regmap_irqs,
- .num_irqs = ARRAY_SIZE(axp20x_regmap_irqs),
- .mask_invert = true,
- .init_ack_masked = true,
-};
-
-static const char * const axp20x_supplies[] = {
- "acin",
- "vin2",
- "vin3",
- "ldo24in",
- "ldo3in",
- "ldo5in",
-};
-
-static struct mfd_cell axp20x_cells[] = {
- {
- .name = "axp20x-pek",
- .num_resources = ARRAY_SIZE(axp20x_pek_resources),
- .resources = axp20x_pek_resources,
- }, {
- .name = "axp20x-regulator",
- .parent_supplies = axp20x_supplies,
- .num_parent_supplies = ARRAY_SIZE(axp20x_supplies),
- },
-};
-
-static struct axp20x_dev *axp20x_pm_power_off;
-static void axp20x_power_off(void)
-{
- regmap_write(axp20x_pm_power_off->regmap, AXP20X_OFF_CTRL,
- AXP20X_OFF);
-}
-
-static int axp20x_i2c_probe(struct i2c_client *i2c,
- const struct i2c_device_id *id)
-{
- struct axp20x_dev *axp20x;
- const struct of_device_id *of_id;
- int ret;
-
- axp20x = devm_kzalloc(&i2c->dev, sizeof(*axp20x), GFP_KERNEL);
- if (!axp20x)
- return -ENOMEM;
-
- of_id = of_match_device(axp20x_of_match, &i2c->dev);
- if (!of_id) {
- dev_err(&i2c->dev, "Unable to setup AXP20X data\n");
- return -ENODEV;
- }
- axp20x->variant = (long) of_id->data;
-
- axp20x->i2c_client = i2c;
- axp20x->dev = &i2c->dev;
- dev_set_drvdata(axp20x->dev, axp20x);
-
- axp20x->regmap = devm_regmap_init_i2c(i2c, &axp20x_regmap_config);
- if (IS_ERR(axp20x->regmap)) {
- ret = PTR_ERR(axp20x->regmap);
- dev_err(&i2c->dev, "regmap init failed: %d\n", ret);
- return ret;
- }
-
- ret = regmap_add_irq_chip(axp20x->regmap, i2c->irq,
- IRQF_ONESHOT | IRQF_SHARED, -1,
- &axp20x_regmap_irq_chip,
- &axp20x->regmap_irqc);
- if (ret) {
- dev_err(&i2c->dev, "failed to add irq chip: %d\n", ret);
- return ret;
- }
-
- ret = mfd_add_devices(axp20x->dev, -1, axp20x_cells,
- ARRAY_SIZE(axp20x_cells), NULL, 0, NULL);
-
- if (ret) {
- dev_err(&i2c->dev, "failed to add MFD devices: %d\n", ret);
- regmap_del_irq_chip(i2c->irq, axp20x->regmap_irqc);
- return ret;
- }
-
- if (!pm_power_off) {
- axp20x_pm_power_off = axp20x;
- pm_power_off = axp20x_power_off;
- }
-
- dev_info(&i2c->dev, "AXP20X driver loaded\n");
-
- return 0;
-}
-
-static int axp20x_i2c_remove(struct i2c_client *i2c)
-{
- struct axp20x_dev *axp20x = i2c_get_clientdata(i2c);
-
- if (axp20x == axp20x_pm_power_off) {
- axp20x_pm_power_off = NULL;
- pm_power_off = NULL;
- }
-
- mfd_remove_devices(axp20x->dev);
- regmap_del_irq_chip(axp20x->i2c_client->irq, axp20x->regmap_irqc);
-
- return 0;
-}
-
-static struct i2c_driver axp20x_i2c_driver = {
- .driver = {
- .name = "axp20x",
- .owner = THIS_MODULE,
- .of_match_table = of_match_ptr(axp20x_of_match),
- },
- .probe = axp20x_i2c_probe,
- .remove = axp20x_i2c_remove,
- .id_table = axp20x_i2c_id,
-};
-
-module_i2c_driver(axp20x_i2c_driver);
-
-MODULE_DESCRIPTION("PMIC MFD core driver for AXP20X");
-MODULE_AUTHOR("Carlo Caione <ca...@caione.org>");
-MODULE_LICENSE("GPL");
diff --git a/drivers/mfd/axp2xx.c b/drivers/mfd/axp2xx.c
new file mode 100644
index 0000000..c534443
--- /dev/null
+++ b/drivers/mfd/axp2xx.c
@@ -0,0 +1,258 @@
+/*
+ * axp20x.c - MFD core driver for the X-Powers AXP202 and AXP209
+ *
+ * AXP20x comprises an adaptive USB-Compatible PWM charger, 2 BUCK DC-DC
+ * converters, 5 LDOs, multiple 12-bit ADCs of voltage, current and temperature
+ * as well as 4 configurable GPIOs.
+ *
+ * Author: Carlo Caione <ca...@caione.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pm_runtime.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+#include <linux/regulator/consumer.h>
+#include <linux/mfd/axp2xx.h>
+#include <linux/mfd/core.h>
+#include <linux/of_device.h>
+#include <linux/of_irq.h>
+
+#define AXP20X_OFF 0x80
+
+static const struct regmap_range axp20x_writeable_ranges[] = {
+ regmap_reg_range(AXP20X_DATACACHE(0), AXP20X_IRQ5_STATE),
+ regmap_reg_range(AXP20X_DCDC_MODE, AXP20X_FG_RES),
+};
+
+static const struct regmap_range axp20x_volatile_ranges[] = {
+ regmap_reg_range(AXP20X_IRQ1_EN, AXP20X_IRQ5_STATE),
+};
+
+static const struct regmap_access_table axp20x_writeable_table = {
+ .yes_ranges = axp20x_writeable_ranges,
+ .n_yes_ranges = ARRAY_SIZE(axp20x_writeable_ranges),
+};
+
+static const struct regmap_access_table axp20x_volatile_table = {
+ .yes_ranges = axp20x_volatile_ranges,
+ .n_yes_ranges = ARRAY_SIZE(axp20x_volatile_ranges),
+};
+
+static struct resource axp20x_pek_resources[] = {
+ {
+ .name = "PEK_DBR",
+ .start = AXP20X_IRQ_PEK_RIS_EDGE,
+ .end = AXP20X_IRQ_PEK_RIS_EDGE,
+ .flags = IORESOURCE_IRQ,
+ }, {
+ .name = "PEK_DBF",
+ .start = AXP20X_IRQ_PEK_FAL_EDGE,
+ .end = AXP20X_IRQ_PEK_FAL_EDGE,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static const struct regmap_config axp20x_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 8,
+ .wr_table = &axp20x_writeable_table,
+ .volatile_table = &axp20x_volatile_table,
+ .max_register = AXP20X_FG_RES,
+ .cache_type = REGCACHE_RBTREE,
+};
+
+#define AXP20X_IRQ(_irq, _off, _mask) \
+ [AXP20X_IRQ_##_irq] = { .reg_offset = (_off), .mask = BIT(_mask) }
+
+static const struct regmap_irq axp20x_regmap_irqs[] = {
+ AXP20X_IRQ(ACIN_OVER_V, 0, 7),
+ AXP20X_IRQ(ACIN_PLUGIN, 0, 6),
+ AXP20X_IRQ(ACIN_REMOVAL, 0, 5),
+ AXP20X_IRQ(VBUS_OVER_V, 0, 4),
+ AXP20X_IRQ(VBUS_PLUGIN, 0, 3),
+ AXP20X_IRQ(VBUS_REMOVAL, 0, 2),
+ AXP20X_IRQ(VBUS_V_LOW, 0, 1),
+ AXP20X_IRQ(BATT_PLUGIN, 1, 7),
+ AXP20X_IRQ(BATT_REMOVAL, 1, 6),
+ AXP20X_IRQ(BATT_ENT_ACT_MODE, 1, 5),
+ AXP20X_IRQ(BATT_EXIT_ACT_MODE, 1, 4),
+ AXP20X_IRQ(CHARG, 1, 3),
+ AXP20X_IRQ(CHARG_DONE, 1, 2),
+ AXP20X_IRQ(BATT_TEMP_HIGH, 1, 1),
+ AXP20X_IRQ(BATT_TEMP_LOW, 1, 0),
+ AXP20X_IRQ(DIE_TEMP_HIGH, 2, 7),
+ AXP20X_IRQ(CHARG_I_LOW, 2, 6),
+ AXP20X_IRQ(DCDC1_V_LONG, 2, 5),
+ AXP20X_IRQ(DCDC2_V_LONG, 2, 4),
+ AXP20X_IRQ(DCDC3_V_LONG, 2, 3),
+ AXP20X_IRQ(PEK_SHORT, 2, 1),
+ AXP20X_IRQ(PEK_LONG, 2, 0),
+ AXP20X_IRQ(N_OE_PWR_ON, 3, 7),
+ AXP20X_IRQ(N_OE_PWR_OFF, 3, 6),
+ AXP20X_IRQ(VBUS_VALID, 3, 5),
+ AXP20X_IRQ(VBUS_NOT_VALID, 3, 4),
+ AXP20X_IRQ(VBUS_SESS_VALID, 3, 3),
+ AXP20X_IRQ(VBUS_SESS_END, 3, 2),
+ AXP20X_IRQ(LOW_PWR_LVL1, 3, 1),
+ AXP20X_IRQ(LOW_PWR_LVL2, 3, 0),
+ AXP20X_IRQ(TIMER, 4, 7),
+ AXP20X_IRQ(PEK_RIS_EDGE, 4, 6),
+ AXP20X_IRQ(PEK_FAL_EDGE, 4, 5),
+ AXP20X_IRQ(GPIO3_INPUT, 4, 3),
+ AXP20X_IRQ(GPIO2_INPUT, 4, 2),
+ AXP20X_IRQ(GPIO1_INPUT, 4, 1),
+ AXP20X_IRQ(GPIO0_INPUT, 4, 0),
+};
+
+static const struct of_device_id axp20x_of_match[] = {
+ { .compatible = "x-powers,axp202", .data = (void *) AXP202_ID },
+ { .compatible = "x-powers,axp209", .data = (void *) AXP209_ID },
+ { },
+};
+MODULE_DEVICE_TABLE(of, axp20x_of_match);
+
+/*
+ * This is useless for OF-enabled devices, but it is needed by I2C subsystem
+ */
+static const struct i2c_device_id axp20x_i2c_id[] = {
+ { },
+};
+MODULE_DEVICE_TABLE(i2c, axp20x_i2c_id);
+
+static const struct regmap_irq_chip axp20x_regmap_irq_chip = {
+ .name = "axp20x_irq_chip",
+ .status_base = AXP20X_IRQ1_STATE,
+ .ack_base = AXP20X_IRQ1_STATE,
+ .mask_base = AXP20X_IRQ1_EN,
+ .num_regs = 5,
+ .irqs = axp20x_regmap_irqs,
+ .num_irqs = ARRAY_SIZE(axp20x_regmap_irqs),
+ .mask_invert = true,
+ .init_ack_masked = true,
+};
+
+static const char * const axp20x_supplies[] = {
+ "acin",
+ "vin2",
+ "vin3",
+ "ldo24in",
+ "ldo3in",
+ "ldo5in",
+};
+
+static struct mfd_cell axp20x_cells[] = {
+ {
+ .name = "axp20x-pek",
+ .num_resources = ARRAY_SIZE(axp20x_pek_resources),
+ .resources = axp20x_pek_resources,
+ }, {
+ .name = "axp20x-regulator",
+ .parent_supplies = axp20x_supplies,
+ .num_parent_supplies = ARRAY_SIZE(axp20x_supplies),
+ },
+};
+
+static struct axp20x_dev *axp20x_pm_power_off;
+static void axp20x_power_off(void)
+{
+ regmap_write(axp20x_pm_power_off->regmap, AXP20X_OFF_CTRL,
+ AXP20X_OFF);
+}
+
+static int axp20x_i2c_probe(struct i2c_client *i2c,
+ const struct i2c_device_id *id)
+{
+ struct axp20x_dev *axp20x;
+ const struct of_device_id *of_id;
+ int ret;
+
+ axp20x = devm_kzalloc(&i2c->dev, sizeof(*axp20x), GFP_KERNEL);
+ if (!axp20x)
+ return -ENOMEM;
+
+ of_id = of_match_device(axp20x_of_match, &i2c->dev);
+ if (!of_id) {
+ dev_err(&i2c->dev, "Unable to setup AXP20X data\n");
+ return -ENODEV;
+ }
+ axp20x->variant = (long) of_id->data;
+
+ axp20x->i2c_client = i2c;
+ axp20x->dev = &i2c->dev;
+ dev_set_drvdata(axp20x->dev, axp20x);
+
+ axp20x->regmap = devm_regmap_init_i2c(i2c, &axp20x_regmap_config);
+ if (IS_ERR(axp20x->regmap)) {
+ ret = PTR_ERR(axp20x->regmap);
+ dev_err(&i2c->dev, "regmap init failed: %d\n", ret);
+ return ret;
+ }
+
+ ret = regmap_add_irq_chip(axp20x->regmap, i2c->irq,
+ IRQF_ONESHOT | IRQF_SHARED, -1,
+ &axp20x_regmap_irq_chip,
+ &axp20x->regmap_irqc);
+ if (ret) {
+ dev_err(&i2c->dev, "failed to add irq chip: %d\n", ret);
+ return ret;
+ }
+
+ ret = mfd_add_devices(axp20x->dev, -1, axp20x_cells,
+ ARRAY_SIZE(axp20x_cells), NULL, 0, NULL);
+
+ if (ret) {
+ dev_err(&i2c->dev, "failed to add MFD devices: %d\n", ret);
+ regmap_del_irq_chip(i2c->irq, axp20x->regmap_irqc);
+ return ret;
+ }
+
+ if (!pm_power_off) {
+ axp20x_pm_power_off = axp20x;
+ pm_power_off = axp20x_power_off;
+ }
+
+ dev_info(&i2c->dev, "AXP20X driver loaded\n");
+
+ return 0;
+}
+
+static int axp20x_i2c_remove(struct i2c_client *i2c)
+{
+ struct axp20x_dev *axp20x = i2c_get_clientdata(i2c);
+
+ if (axp20x == axp20x_pm_power_off) {
+ axp20x_pm_power_off = NULL;
+ pm_power_off = NULL;
+ }
+
+ mfd_remove_devices(axp20x->dev);
+ regmap_del_irq_chip(axp20x->i2c_client->irq, axp20x->regmap_irqc);
+
+ return 0;
+}
+
+static struct i2c_driver axp20x_i2c_driver = {
+ .driver = {
+ .name = "axp20x",
+ .owner = THIS_MODULE,
+ .of_match_table = of_match_ptr(axp20x_of_match),
+ },
+ .probe = axp20x_i2c_probe,
+ .remove = axp20x_i2c_remove,
+ .id_table = axp20x_i2c_id,
+};
+
+module_i2c_driver(axp20x_i2c_driver);
+
+MODULE_DESCRIPTION("PMIC MFD core driver for AXP20X");
+MODULE_AUTHOR("Carlo Caione <ca...@caione.org>");
+MODULE_LICENSE("GPL");
diff --git a/include/linux/mfd/axp20x.h b/include/linux/mfd/axp20x.h
deleted file mode 100644
index d0e31a2..0000000
--- a/include/linux/mfd/axp20x.h
+++ /dev/null
@@ -1,180 +0,0 @@
-/*
- * Functions and registers to access AXP20X power management chip.
- *
- * Copyright (C) 2013, Carlo Caione <ca...@caione.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __LINUX_MFD_AXP20X_H
-#define __LINUX_MFD_AXP20X_H
-
-enum {
- AXP202_ID = 0,
- AXP209_ID,
-};
-
-#define AXP20X_DATACACHE(m) (0x04 + (m))
-
-/* Power supply */
-#define AXP20X_PWR_INPUT_STATUS 0x00
-#define AXP20X_PWR_OP_MODE 0x01
-#define AXP20X_USB_OTG_STATUS 0x02
-#define AXP20X_PWR_OUT_CTRL 0x12
-#define AXP20X_DCDC2_V_OUT 0x23
-#define AXP20X_DCDC2_LDO3_V_SCAL 0x25
-#define AXP20X_DCDC3_V_OUT 0x27
-#define AXP20X_LDO24_V_OUT 0x28
-#define AXP20X_LDO3_V_OUT 0x29
-#define AXP20X_VBUS_IPSOUT_MGMT 0x30
-#define AXP20X_V_OFF 0x31
-#define AXP20X_OFF_CTRL 0x32
-#define AXP20X_CHRG_CTRL1 0x33
-#define AXP20X_CHRG_CTRL2 0x34
-#define AXP20X_CHRG_BAK_CTRL 0x35
-#define AXP20X_PEK_KEY 0x36
-#define AXP20X_DCDC_FREQ 0x37
-#define AXP20X_V_LTF_CHRG 0x38
-#define AXP20X_V_HTF_CHRG 0x39
-#define AXP20X_APS_WARN_L1 0x3a
-#define AXP20X_APS_WARN_L2 0x3b
-#define AXP20X_V_LTF_DISCHRG 0x3c
-#define AXP20X_V_HTF_DISCHRG 0x3d
-
-/* Interrupt */
-#define AXP20X_IRQ1_EN 0x40
-#define AXP20X_IRQ2_EN 0x41
-#define AXP20X_IRQ3_EN 0x42
-#define AXP20X_IRQ4_EN 0x43
-#define AXP20X_IRQ5_EN 0x44
-#define AXP20X_IRQ1_STATE 0x48
-#define AXP20X_IRQ2_STATE 0x49
-#define AXP20X_IRQ3_STATE 0x4a
-#define AXP20X_IRQ4_STATE 0x4b
-#define AXP20X_IRQ5_STATE 0x4c
-
-/* ADC */
-#define AXP20X_ACIN_V_ADC_H 0x56
-#define AXP20X_ACIN_V_ADC_L 0x57
-#define AXP20X_ACIN_I_ADC_H 0x58
-#define AXP20X_ACIN_I_ADC_L 0x59
-#define AXP20X_VBUS_V_ADC_H 0x5a
-#define AXP20X_VBUS_V_ADC_L 0x5b
-#define AXP20X_VBUS_I_ADC_H 0x5c
-#define AXP20X_VBUS_I_ADC_L 0x5d
-#define AXP20X_TEMP_ADC_H 0x5e
-#define AXP20X_TEMP_ADC_L 0x5f
-#define AXP20X_TS_IN_H 0x62
-#define AXP20X_TS_IN_L 0x63
-#define AXP20X_GPIO0_V_ADC_H 0x64
-#define AXP20X_GPIO0_V_ADC_L 0x65
-#define AXP20X_GPIO1_V_ADC_H 0x66
-#define AXP20X_GPIO1_V_ADC_L 0x67
-#define AXP20X_PWR_BATT_H 0x70
-#define AXP20X_PWR_BATT_M 0x71
-#define AXP20X_PWR_BATT_L 0x72
-#define AXP20X_BATT_V_H 0x78
-#define AXP20X_BATT_V_L 0x79
-#define AXP20X_BATT_CHRG_I_H 0x7a
-#define AXP20X_BATT_CHRG_I_L 0x7b
-#define AXP20X_BATT_DISCHRG_I_H 0x7c
-#define AXP20X_BATT_DISCHRG_I_L 0x7d
-#define AXP20X_IPSOUT_V_HIGH_H 0x7e
-#define AXP20X_IPSOUT_V_HIGH_L 0x7f
-
-/* Power supply */
-#define AXP20X_DCDC_MODE 0x80
-#define AXP20X_ADC_EN1 0x82
-#define AXP20X_ADC_EN2 0x83
-#define AXP20X_ADC_RATE 0x84
-#define AXP20X_GPIO10_IN_RANGE 0x85
-#define AXP20X_GPIO1_ADC_IRQ_RIS 0x86
-#define AXP20X_GPIO1_ADC_IRQ_FAL 0x87
-#define AXP20X_TIMER_CTRL 0x8a
-#define AXP20X_VBUS_MON 0x8b
-#define AXP20X_OVER_TMP 0x8f
-
-/* GPIO */
-#define AXP20X_GPIO0_CTRL 0x90
-#define AXP20X_LDO5_V_OUT 0x91
-#define AXP20X_GPIO1_CTRL 0x92
-#define AXP20X_GPIO2_CTRL 0x93
-#define AXP20X_GPIO20_SS 0x94
-#define AXP20X_GPIO3_CTRL 0x95
-
-/* Battery */
-#define AXP20X_CHRG_CC_31_24 0xb0
-#define AXP20X_CHRG_CC_23_16 0xb1
-#define AXP20X_CHRG_CC_15_8 0xb2
-#define AXP20X_CHRG_CC_7_0 0xb3
-#define AXP20X_DISCHRG_CC_31_24 0xb4
-#define AXP20X_DISCHRG_CC_23_16 0xb5
-#define AXP20X_DISCHRG_CC_15_8 0xb6
-#define AXP20X_DISCHRG_CC_7_0 0xb7
-#define AXP20X_CC_CTRL 0xb8
-#define AXP20X_FG_RES 0xb9
-
-/* Regulators IDs */
-enum {
- AXP20X_LDO1 = 0,
- AXP20X_LDO2,
- AXP20X_LDO3,
- AXP20X_LDO4,
- AXP20X_LDO5,
- AXP20X_DCDC2,
- AXP20X_DCDC3,
- AXP20X_REG_ID_MAX,
-};
-
-/* IRQs */
-enum {
- AXP20X_IRQ_ACIN_OVER_V = 1,
- AXP20X_IRQ_ACIN_PLUGIN,
- AXP20X_IRQ_ACIN_REMOVAL,
- AXP20X_IRQ_VBUS_OVER_V,
- AXP20X_IRQ_VBUS_PLUGIN,
- AXP20X_IRQ_VBUS_REMOVAL,
- AXP20X_IRQ_VBUS_V_LOW,
- AXP20X_IRQ_BATT_PLUGIN,
- AXP20X_IRQ_BATT_REMOVAL,
- AXP20X_IRQ_BATT_ENT_ACT_MODE,
- AXP20X_IRQ_BATT_EXIT_ACT_MODE,
- AXP20X_IRQ_CHARG,
- AXP20X_IRQ_CHARG_DONE,
- AXP20X_IRQ_BATT_TEMP_HIGH,
- AXP20X_IRQ_BATT_TEMP_LOW,
- AXP20X_IRQ_DIE_TEMP_HIGH,
- AXP20X_IRQ_CHARG_I_LOW,
- AXP20X_IRQ_DCDC1_V_LONG,
- AXP20X_IRQ_DCDC2_V_LONG,
- AXP20X_IRQ_DCDC3_V_LONG,
- AXP20X_IRQ_PEK_SHORT = 22,
- AXP20X_IRQ_PEK_LONG,
- AXP20X_IRQ_N_OE_PWR_ON,
- AXP20X_IRQ_N_OE_PWR_OFF,
- AXP20X_IRQ_VBUS_VALID,
- AXP20X_IRQ_VBUS_NOT_VALID,
- AXP20X_IRQ_VBUS_SESS_VALID,
- AXP20X_IRQ_VBUS_SESS_END,
- AXP20X_IRQ_LOW_PWR_LVL1,
- AXP20X_IRQ_LOW_PWR_LVL2,
- AXP20X_IRQ_TIMER,
- AXP20X_IRQ_PEK_RIS_EDGE,
- AXP20X_IRQ_PEK_FAL_EDGE,
- AXP20X_IRQ_GPIO3_INPUT,
- AXP20X_IRQ_GPIO2_INPUT,
- AXP20X_IRQ_GPIO1_INPUT,
- AXP20X_IRQ_GPIO0_INPUT,
-};
-
-struct axp20x_dev {
- struct device *dev;
- struct i2c_client *i2c_client;
- struct regmap *regmap;
- struct regmap_irq_chip_data *regmap_irqc;
- long variant;
-};
-
-#endif /* __LINUX_MFD_AXP20X_H */
diff --git a/include/linux/mfd/axp2xx.h b/include/linux/mfd/axp2xx.h
new file mode 100644
index 0000000..d0e31a2
--- /dev/null
+++ b/include/linux/mfd/axp2xx.h
@@ -0,0 +1,180 @@
+/*
+ * Functions and registers to access AXP20X power management chip.
+ *
+ * Copyright (C) 2013, Carlo Caione <ca...@caione.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __LINUX_MFD_AXP20X_H
+#define __LINUX_MFD_AXP20X_H
+
+enum {
+ AXP202_ID = 0,
+ AXP209_ID,
+};
+
+#define AXP20X_DATACACHE(m) (0x04 + (m))
+
+/* Power supply */
+#define AXP20X_PWR_INPUT_STATUS 0x00
+#define AXP20X_PWR_OP_MODE 0x01
+#define AXP20X_USB_OTG_STATUS 0x02
+#define AXP20X_PWR_OUT_CTRL 0x12
+#define AXP20X_DCDC2_V_OUT 0x23
+#define AXP20X_DCDC2_LDO3_V_SCAL 0x25
+#define AXP20X_DCDC3_V_OUT 0x27
+#define AXP20X_LDO24_V_OUT 0x28
+#define AXP20X_LDO3_V_OUT 0x29
+#define AXP20X_VBUS_IPSOUT_MGMT 0x30
+#define AXP20X_V_OFF 0x31
+#define AXP20X_OFF_CTRL 0x32
+#define AXP20X_CHRG_CTRL1 0x33
+#define AXP20X_CHRG_CTRL2 0x34
+#define AXP20X_CHRG_BAK_CTRL 0x35
+#define AXP20X_PEK_KEY 0x36
+#define AXP20X_DCDC_FREQ 0x37
+#define AXP20X_V_LTF_CHRG 0x38
+#define AXP20X_V_HTF_CHRG 0x39
+#define AXP20X_APS_WARN_L1 0x3a
+#define AXP20X_APS_WARN_L2 0x3b
+#define AXP20X_V_LTF_DISCHRG 0x3c
+#define AXP20X_V_HTF_DISCHRG 0x3d
+
+/* Interrupt */
+#define AXP20X_IRQ1_EN 0x40
+#define AXP20X_IRQ2_EN 0x41
+#define AXP20X_IRQ3_EN 0x42
+#define AXP20X_IRQ4_EN 0x43
+#define AXP20X_IRQ5_EN 0x44
+#define AXP20X_IRQ1_STATE 0x48
+#define AXP20X_IRQ2_STATE 0x49
+#define AXP20X_IRQ3_STATE 0x4a
+#define AXP20X_IRQ4_STATE 0x4b
+#define AXP20X_IRQ5_STATE 0x4c
+
+/* ADC */
+#define AXP20X_ACIN_V_ADC_H 0x56
+#define AXP20X_ACIN_V_ADC_L 0x57
+#define AXP20X_ACIN_I_ADC_H 0x58
+#define AXP20X_ACIN_I_ADC_L 0x59
+#define AXP20X_VBUS_V_ADC_H 0x5a
+#define AXP20X_VBUS_V_ADC_L 0x5b
+#define AXP20X_VBUS_I_ADC_H 0x5c
+#define AXP20X_VBUS_I_ADC_L 0x5d
+#define AXP20X_TEMP_ADC_H 0x5e
+#define AXP20X_TEMP_ADC_L 0x5f
+#define AXP20X_TS_IN_H 0x62
+#define AXP20X_TS_IN_L 0x63
+#define AXP20X_GPIO0_V_ADC_H 0x64
+#define AXP20X_GPIO0_V_ADC_L 0x65
+#define AXP20X_GPIO1_V_ADC_H 0x66
+#define AXP20X_GPIO1_V_ADC_L 0x67
+#define AXP20X_PWR_BATT_H 0x70
+#define AXP20X_PWR_BATT_M 0x71
+#define AXP20X_PWR_BATT_L 0x72
+#define AXP20X_BATT_V_H 0x78
+#define AXP20X_BATT_V_L 0x79
+#define AXP20X_BATT_CHRG_I_H 0x7a
+#define AXP20X_BATT_CHRG_I_L 0x7b
+#define AXP20X_BATT_DISCHRG_I_H 0x7c
+#define AXP20X_BATT_DISCHRG_I_L 0x7d
+#define AXP20X_IPSOUT_V_HIGH_H 0x7e
+#define AXP20X_IPSOUT_V_HIGH_L 0x7f
+
+/* Power supply */
+#define AXP20X_DCDC_MODE 0x80
+#define AXP20X_ADC_EN1 0x82
+#define AXP20X_ADC_EN2 0x83
+#define AXP20X_ADC_RATE 0x84
+#define AXP20X_GPIO10_IN_RANGE 0x85
+#define AXP20X_GPIO1_ADC_IRQ_RIS 0x86
+#define AXP20X_GPIO1_ADC_IRQ_FAL 0x87
+#define AXP20X_TIMER_CTRL 0x8a
+#define AXP20X_VBUS_MON 0x8b
+#define AXP20X_OVER_TMP 0x8f
+
+/* GPIO */
+#define AXP20X_GPIO0_CTRL 0x90
+#define AXP20X_LDO5_V_OUT 0x91
+#define AXP20X_GPIO1_CTRL 0x92
+#define AXP20X_GPIO2_CTRL 0x93
+#define AXP20X_GPIO20_SS 0x94
+#define AXP20X_GPIO3_CTRL 0x95
+
+/* Battery */
+#define AXP20X_CHRG_CC_31_24 0xb0
+#define AXP20X_CHRG_CC_23_16 0xb1
+#define AXP20X_CHRG_CC_15_8 0xb2
+#define AXP20X_CHRG_CC_7_0 0xb3
+#define AXP20X_DISCHRG_CC_31_24 0xb4
+#define AXP20X_DISCHRG_CC_23_16 0xb5
+#define AXP20X_DISCHRG_CC_15_8 0xb6
+#define AXP20X_DISCHRG_CC_7_0 0xb7
+#define AXP20X_CC_CTRL 0xb8
+#define AXP20X_FG_RES 0xb9
+
+/* Regulators IDs */
+enum {
+ AXP20X_LDO1 = 0,
+ AXP20X_LDO2,
+ AXP20X_LDO3,
+ AXP20X_LDO4,
+ AXP20X_LDO5,
+ AXP20X_DCDC2,
+ AXP20X_DCDC3,
+ AXP20X_REG_ID_MAX,
+};
+
+/* IRQs */
+enum {
+ AXP20X_IRQ_ACIN_OVER_V = 1,
+ AXP20X_IRQ_ACIN_PLUGIN,
+ AXP20X_IRQ_ACIN_REMOVAL,
+ AXP20X_IRQ_VBUS_OVER_V,
+ AXP20X_IRQ_VBUS_PLUGIN,
+ AXP20X_IRQ_VBUS_REMOVAL,
+ AXP20X_IRQ_VBUS_V_LOW,
+ AXP20X_IRQ_BATT_PLUGIN,
+ AXP20X_IRQ_BATT_REMOVAL,
+ AXP20X_IRQ_BATT_ENT_ACT_MODE,
+ AXP20X_IRQ_BATT_EXIT_ACT_MODE,
+ AXP20X_IRQ_CHARG,
+ AXP20X_IRQ_CHARG_DONE,
+ AXP20X_IRQ_BATT_TEMP_HIGH,
+ AXP20X_IRQ_BATT_TEMP_LOW,
+ AXP20X_IRQ_DIE_TEMP_HIGH,
+ AXP20X_IRQ_CHARG_I_LOW,
+ AXP20X_IRQ_DCDC1_V_LONG,
+ AXP20X_IRQ_DCDC2_V_LONG,
+ AXP20X_IRQ_DCDC3_V_LONG,
+ AXP20X_IRQ_PEK_SHORT = 22,
+ AXP20X_IRQ_PEK_LONG,
+ AXP20X_IRQ_N_OE_PWR_ON,
+ AXP20X_IRQ_N_OE_PWR_OFF,
+ AXP20X_IRQ_VBUS_VALID,
+ AXP20X_IRQ_VBUS_NOT_VALID,
+ AXP20X_IRQ_VBUS_SESS_VALID,
+ AXP20X_IRQ_VBUS_SESS_END,
+ AXP20X_IRQ_LOW_PWR_LVL1,
+ AXP20X_IRQ_LOW_PWR_LVL2,
+ AXP20X_IRQ_TIMER,
+ AXP20X_IRQ_PEK_RIS_EDGE,
+ AXP20X_IRQ_PEK_FAL_EDGE,
+ AXP20X_IRQ_GPIO3_INPUT,
+ AXP20X_IRQ_GPIO2_INPUT,
+ AXP20X_IRQ_GPIO1_INPUT,
+ AXP20X_IRQ_GPIO0_INPUT,
+};
+
+struct axp20x_dev {
+ struct device *dev;
+ struct i2c_client *i2c_client;
+ struct regmap *regmap;
+ struct regmap_irq_chip_data *regmap_irqc;
+ long variant;
+};
+
+#endif /* __LINUX_MFD_AXP20X_H */
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
