On Thu 24 Mar 2005, Neil Brown wrote: > On Tuesday March 22, [EMAIL PROTECTED] wrote: > > This is on kernel 2.6.11, mdadm 1.4.0 > > > > The system has MD devices that are auto-configured on boot. > > > > However, there are also devices connected via another SCSI adapter > > (actually, a Qlogic QLA2300). I'm using a module for that. As the > > auto-configure only runs at boot (or rather, when the md subsystem is > > started). I wanted to restart a raid-0 device that I had previously > > created. I did: > > > > mdadm --run /dev/md10 > > As you admit, this is wrong. You want something like > mdadm --assemble /dev/md10 /dev/.....(list of component devices) > > or describe the md10 array (e.g. via UUID) in /etc/mdadm.conf
It took a bit of trial and error (I find the mdadm docs a bit confusing...) but I came up with this: mdadm --assemble --super-minor=10 --config=partitions /dev/md10 > > error message in the subject, and a "COMPLETE RAID STATE PRINTOUT"... > > In that output there is a line "md10:", the next line is > > "md1: <sde1><sdd1><sdc1><sdb1><sda1>". > > > > > > Admittedly the usage may be wrong, but having the kernel say "bug" can't > > be right :-) > > > > Yes, there are quite a few of those silly bug messages. I've removed > a few, but have not yet gone through and checked and removed all the > bad ones. Keep up the good work :-) Paul Slootman - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
