[PATCH 1/5] ARM: dts: pbab01: move i2c pins and frequency configuration into pfla02

[Dmitry Lavnikevich]

Since pins and frequency are specific to module (pfla02), not base board
(pbab02), it is better to be initialized in corresponding dts file.

Signed-off-by: Dmitry Lavnikevich <d.lavnikev...@sam-solutions.com>
---
 arch/arm/boot/dts/imx6qdl-phytec-pbab01.dtsi | 22 ----------------------
 arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi | 26 ++++++++++++++++++++++++++
 2 files changed, 26 insertions(+), 22 deletions(-)

diff --git a/arch/arm/boot/dts/imx6qdl-phytec-pbab01.dtsi 
b/arch/arm/boot/dts/imx6qdl-phytec-pbab01.dtsi
index 584721264121..f1bdcae5b97d 100644
--- a/arch/arm/boot/dts/imx6qdl-phytec-pbab01.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-phytec-pbab01.dtsi
@@ -28,9 +28,6 @@
 };
 
 &i2c2 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&pinctrl_i2c2>;
-       clock-frequency = <100000>;
        status = "okay";
 
        tlv320@18 {
@@ -55,9 +52,6 @@
 };
 
 &i2c3 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&pinctrl_i2c3>;
-       clock-frequency = <100000>;
        status = "okay";
 };
 
@@ -84,19 +78,3 @@
 &usdhc3 {
        status = "okay";
 };
-
-&iomuxc {
-       pinctrl_i2c2: i2c2grp {
-               fsl,pins = <
-                       MX6QDL_PAD_EIM_EB2__I2C2_SCL            0x4001b8b1
-                       MX6QDL_PAD_EIM_D16__I2C2_SDA            0x4001b8b1
-               >;
-       };
-
-       pinctrl_i2c3: i2c3grp {
-               fsl,pins = <
-                       MX6QDL_PAD_EIM_D17__I2C3_SCL            0x4001b8b1
-                       MX6QDL_PAD_EIM_D18__I2C3_SDA            0x4001b8b1
-               >;
-       };
-};
diff --git a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi 
b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
index 2694aa84e187..a927e88ccc98 100644
--- a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
@@ -162,6 +162,18 @@
        };
 };
 
+&i2c2 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_i2c2>;
+       clock-frequency = <100000>;
+};
+
+&i2c3 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_i2c3>;
+       clock-frequency = <100000>;
+};
+
 &iomuxc {
        pinctrl-names = "default";
        pinctrl-0 = <&pinctrl_hog>;
@@ -235,6 +247,20 @@
                        >;
                };
 
+               pinctrl_i2c2: i2c2grp {
+                       fsl,pins = <
+                               MX6QDL_PAD_EIM_EB2__I2C2_SCL            
0x4001b8b1
+                               MX6QDL_PAD_EIM_D16__I2C2_SDA            
0x4001b8b1
+                       >;
+               };
+
+               pinctrl_i2c3: i2c3grp {
+                       fsl,pins = <
+                               MX6QDL_PAD_EIM_D17__I2C3_SCL            
0x4001b8b1
+                               MX6QDL_PAD_EIM_D18__I2C3_SDA            
0x4001b8b1
+                       >;
+               };
+
                pinctrl_uart3: uart3grp {
                        fsl,pins = <
                                MX6QDL_PAD_EIM_D24__UART3_TX_DATA       0x1b0b1
-- 
2.1.0

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/