On 09/09/2014 at 12:14:20 +0200, Boris Brezillon wrote :
> Declare the SCKC (Slow Clock Configuration) block and its clks.
> Make use of the clk32k clk instead of slow_osc where appropriate.
> 
> Signed-off-by: Boris BREZILLON <boris.brezil...@free-electrons.com>
Acked-by: Alexandre Belloni <alexandre.bell...@free-electrons.com>

> ---
>  arch/arm/boot/dts/at91sam9g45.dtsi | 30 ++++++++++++++++++++++++++++--
>  1 file changed, 28 insertions(+), 2 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi 
> b/arch/arm/boot/dts/at91sam9g45.dtsi
> index 9d4d0a1..68a457b 100644
> --- a/arch/arm/boot/dts/at91sam9g45.dtsi
> +++ b/arch/arm/boot/dts/at91sam9g45.dtsi
> @@ -159,7 +159,7 @@
>                                       compatible = 
> "atmel,at91rm9200-clk-master";
>                                       #clock-cells = <0>;
>                                       interrupts-extended = <&pmc 
> AT91_PMC_MCKRDY>;
> -                                     clocks = <&slow_xtal>, <&main>, 
> <&plladiv>, <&utmi>;
> +                                     clocks = <&clk32k>, <&main>, 
> <&plladiv>, <&utmi>;
>                                       atmel,clk-output-range = <0 133333333>;
>                                       atmel,clk-divisors = <1 2 4 3>;
>                               };
> @@ -175,7 +175,7 @@
>                                       #address-cells = <1>;
>                                       #size-cells = <0>;
>                                       interrupt-parent = <&pmc>;
> -                                     clocks = <&slow_xtal>, <&main>, 
> <&plladiv>, <&utmi>, <&mck>;
> +                                     clocks = <&clk32k>, <&main>, 
> <&plladiv>, <&utmi>, <&mck>;
>  
>                                       prog0: prog0 {
>                                               #clock-cells = <0>;
> @@ -1160,6 +1160,32 @@
>                               };
>                       };
>  
> +                     sckc@fffffd50 {
> +                             compatible = "atmel,at91sam9x5-sckc";
> +                             reg = <0xfffffd50 0x4>;
> +
> +                             slow_osc: slow_osc {
> +                                     compatible = 
> "atmel,at91sam9x5-clk-slow-osc";
> +                                     #clock-cells = <0>;
> +                                     atmel,startup-time-usec = <1200000>;
> +                                     clocks = <&slow_xtal>;
> +                             };
> +
> +                             slow_rc_osc: slow_rc_osc {
> +                                     compatible = 
> "atmel,at91sam9x5-clk-slow-rc-osc";
> +                                     #clock-cells = <0>;
> +                                     atmel,startup-time-usec = <75>;
> +                                     clock-frequency = <32768>;
> +                                     clock-accuracy = <50000000>;
> +                             };
> +
> +                             clk32k: slck {
> +                                     compatible = 
> "atmel,at91sam9x5-clk-slow";
> +                                     #clock-cells = <0>;
> +                                     clocks = <&slow_rc_osc &slow_osc>;
> +                             };
> +                     };
> +
>                       rtc@fffffdb0 {
>                               compatible = "atmel,at91rm9200-rtc";
>                               reg = <0xfffffdb0 0x10>;
> -- 
> 1.9.1
> 

-- 
Alexandre Belloni, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Reply via email to