On Thu, Sep 11, 2014 at 6:17 PM, Stephen Boyd <sb...@codeaurora.org> wrote: > On 09/11/14 17:14, Sonny Rao wrote: > > On Thu, Sep 11, 2014 at 4:56 PM, Stephen Boyd <sb...@codeaurora.org> wrote: >> >> >> Where does this platform jump to when a CPU comes up? Is it >> rockchip_secondary_startup()? I wonder if that path could have this >> little bit of assembly to poke the cntvoff in monitor mode and then jump >> to secondary_startup()? Before we boot any secondary CPUs we could also >> read the cntvoff for CPU0 in the platform specific layer (where we know >> we're running in secure mode) and then use that value as the "reset" >> value for the secondaries. Or does this platform boot up in secure mode >> some times and non-secure mode other times? > > > Yes, In our case, with our firmware, we will go through some internal Rom > code and then jump to rockchip_secondary_startup, but I don't think it's > correct to force all users of this SoC to do it that way. > > > What's being forced? The way internal rom jumps to sram? Is there any other > way that secondary CPUs come out of reset on this SoC? From looking at the > code it seems like the only path is internal rom jumps to sram (where > rockchip_secondary_trampoline lives) which jumps to > rockchip_secondary_startup() which then does an invalidate and jump to > secondary_startup(). Linux controls everything besides the internal rom. Is > something different in your case?
There are other ways it can be done, and I don't know all of the possibilities, but there seems to be some protocol with the iROM that tells it where to go, which the current SMP patches are using by putting a magic number and an address in SRAM. I think it's true that in our case, it really is pretty simple and we have secure SVC mode and not much else runs (besides the iROM). Since I don't know all of the possibilities, I didn't want to preclude the possibility that someone else handled things differently and entered the kernel in non-secure mode, and have some code there that broke in that instance, that's all I meant by "forced". > > If there were a reasonable way to determine for sure that we are in secure > mode, then yes we could do what you're suggesting, and I'd be happy to code > that up. > > > I think the problem is that there isn't a great way to determine whether > we're in secure mode or not, and this is maybe by design? I don't > particularly understand that design choice. It would be nice to hear some > rationale from ARM folks. > > > I'm thinking we would have a different boot-method for secure vs. non-secure > and then we would know to configure cntvoff or not based on the boot method. > Isn't that a reasonable way of knowing what should be done? It seems like we > can at least modify the DT for this SoC. Putting something into the device-tree is in fact the point of this patch, so it is sort of doing what you're suggesting, although this patch is about being able use to physical counters and doesn't indicate anything about secure vs non-secure. What else do you think could be used to differentiate between the two cases, besides putting it into the DT? > > I still wonder if there is such a bootloader/hypervisor/rom that's putting > this SoC into non-secure mode and not configuring cntvoff. Doug's comments > seem to suggest that the whole world would be different if this were true. > Maybe Heiko knows? As far as I'm aware, there's no bootloader/firmware that's ever putting the CPU into non-secure mode for our case. > -- > Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, > hosted by The Linux Foundation -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/