This patch adds i2c pinctrl DT node for IFC6410 board.
It also adds necessary DT support for i2c eeprom which is present on
IFC6410.
Tested on IFC6410 board.
Signed-off-by: Kiran Padwal <kiran.pad...@smartplayin.com>
---
Changes since v3:
- Removed pinctrl DT node.
Changes since v2:
- Renamed pinmux i2c subnode "i2c1_pinmux" to "i2c1".
- Removed labes of node.
- Used canonical value as "okay" instead of "ok".
- Used macros.
Changes since v1:
- Renamed pinmux phandle "qcom_pinmux" to "tlmm_pinmux".
- Updated pinmux interrupt.
arch/arm/boot/dts/qcom-apq8064-ifc6410.dts | 27 ++++++++++++++++++
arch/arm/boot/dts/qcom-apq8064.dtsi | 42 ++++++++++++++++++++++++++++
2 files changed, 69 insertions(+)
diff --git a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts
b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts
index 90db8af..3573cd7 100644
--- a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts
+++ b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts
@@ -5,6 +5,33 @@
compatible = "qcom,apq8064-ifc6410", "qcom,apq8064";
soc {
+ pinctrl@800000 {
+ i2c1_pins: i2c1 {
+ mux {
+ pins = "gpio20", "gpio21";
+ function = "gsbi1";
+ };
+ };
+ };
+
+ gsbi@12440000 {
+ status = "okay";
+ qcom,mode = <GSBI_PROT_I2C>;
+
+ i2c@12460000 {
+ status = "okay";
+ clock-frequency = <200000>;
+ pinctrl-0 = <&i2c1_pins>;
+ pinctrl-names = "default";
+
+ eeprom: eeprom@52 {
+ compatible = "atmel,24c128";
+ reg = <0x52>;
+ pagesize = <32>;
+ };
+ };
+ };
+
gsbi@16600000 {
status = "ok";
qcom,mode = <GSBI_PROT_I2C_UART>;
diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi
b/arch/arm/boot/dts/qcom-apq8064.dtsi
index b1e476a..fddaeb7 100644
--- a/arch/arm/boot/dts/qcom-apq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-apq8064.dtsi
@@ -156,6 +156,48 @@
regulator;
};
+ gsbi1: gsbi@12440000 {
+ status = "disabled";
+ compatible = "qcom,gsbi-v1.0.0";
+ reg = <0x12440000 0x100>;
+ clocks = <&gcc GSBI1_H_CLK>;
+ clock-names = "iface";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ i2c1: i2c@12460000 {
+ compatible = "qcom,i2c-qup-v1.1.1";
+ reg = <0x12460000 0x1000>;
+ interrupts = <0 194 IRQ_TYPE_NONE>;
+ clocks = <&gcc GSBI1_QUP_CLK>, <&gcc
GSBI1_H_CLK>;
+ clock-names = "core", "iface";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+
+ gsbi2: gsbi@12480000 {
+ status = "disabled";
+ compatible = "qcom,gsbi-v1.0.0";
+ reg = <0x12480000 0x100>;
+ clocks = <&gcc GSBI2_H_CLK>;
+ clock-names = "iface";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ i2c2: i2c@124a0000 {
+ compatible = "qcom,i2c-qup-v1.1.1";
+ reg = <0x124a0000 0x1000>;
+ interrupts = <0 196 IRQ_TYPE_NONE>;
+ clocks = <&gcc GSBI2_QUP_CLK>, <&gcc
GSBI2_H_CLK>;
+ clock-names = "core", "iface";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+
gsbi7: gsbi@16600000 {
status = "disabled";
compatible = "qcom,gsbi-v1.0.0";
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
